LIMITED OFFER
Save 50% on book bundles
Immediately download your ebook while waiting for your print delivery. No promo code is needed.
Pneumatic and Hydraulic Control Systems
Seminar on Pneumohydraulic Automation
- 1st Edition - January 1, 1968
- Editor: M. A. Aizerman
- Language: English
- eBook ISBN:9 7 8 - 1 - 4 8 3 1 - 5 5 8 9 - 0
Pneumatic and Hydraulic Control Systems, Volume 2, documents the proceedings of a symposium on pneumohydraulic automation. The symposium is a continuation of the first symposium of… Read more
Purchase options
Institutional subscription on ScienceDirect
Request a sales quotePneumatic and Hydraulic Control Systems, Volume 2, documents the proceedings of a symposium on pneumohydraulic automation. The symposium is a continuation of the first symposium of papers on pneumohydraulic automatics which was published in 1959 by the Academy of Sciences, USSR. The present collection forms part of the lectures and reports presented at the second and third All-Union Conference on pneumohydraulic automatics and embraces a wide range of problems associated with the design and application of pneumohydraulic equipment in the automation of industrial units and other objects. This volume contains 23 chapters organized into four parts. Part I contains papers on the general problems of pneumo- and hydro-automatics. Part II presents studies on pneumatic and hydraulic methods and systems of automatic regulation. Part III is devoted to pneumatic computing devices and methods of computation. The papers in Part IV cover pneumo- and hydro-automatics in the German Democratic Republic and Czechoslovakia.
Contents to Volume 1
Preface to the Russian Edition
General Problems of Pneumo- and Hydro-Automatics
An Analysis of the Possibility of Operating Pneumatic Instruments with Low-Pressure Air
Experimental Investigation of Jet-Tube Elements
Static Characteristics of Pneumatic Nozzle-Baffle Elements
A Method of Analysis of the Follow-up Systems with Hydraulic Servo-Motors
Self-Centering Piston
Pneumatic and Hydraulic Methods and Systems of Automatic Regulation
Pneumatic Transmitters for Pressure, Vacuum, and Differential Pressures
Direct and Inverse Derivative on Automatic Control Systems Built on Pneumatic AUS (Standard Unit System) Devices
A Small Hydraulic Derivative Unit of the Compensating Type
Methods for Raising the Amplification Factor of Industrial-Type Hydraulic Follow-up Drives
Electropneumatic Controller MZTA
The Dynamic Characteristics of AUS (Standard Unit System) Controllers and Recommendations for Setting
The EGR-1 Electrohydraulic Controller
The Pneumatic Standard Aggregate System as the Basis for Complex Automation in the Oil-Refining Industry
Pneumatic Computing Devices and Methods of Computation
Design Problems of Pneumatic Computing Devices
A Small Continuously Operating Pneumatic Computer and Delay Unit
Investigation of the Characteristics of Pneumatic Chambers Employed as Summators
Pneumatic Throttleless Relay Systems
A Design for Employing a Pneumatic Extremal Controller on Systems with a Number of Control Valves
A Gas-Chromatograph Controller with Pneumatic Output (KhPR-1P)
The Extremal Controller Used for Checking and Controlling Some Chemical Processes from the Thermal Effect of the Reaction
Pneumo- and Hydro-Automatics in the German Democratic Republic and Czechoslovakia
Hydraulic and Combined Automatic Control Systems
Pneumatic Controller Elements
Krizhik Hydraulic Controllers
Index
Contents to Volume 2
Translator's Foreword
To English Readers from the Editor of the Russian Original
New Applications and New Means of Pneumatic Control
Pneumatic Extremum Controllers IAT AN U.S.S.R.
Pneumatic Ratio Controllers (without Mechanical Dividers)
Pneumatic Controllers with Automatic Readjustment According to the Load
Pneumatic Switching Circuits
Universal Pneumatic Multiplying-Dividing Device and Device for Square Rooting
The Application of Jet-tube Elements for Non-Linear Transformations in Pneumatic Systems
New Compact Pneumatic Instruments for the Automatic Control and Regulation Developed in "NIITeplopribor"
Investigations of Pneumatic Jet-Tube Elements
New Systems of Pneumatic and Hydraulic Automation
Pneumatic Aggregate System of KB-TsMA
Hydraulic Equipment of Automatic Machine-Tool Lines
Elements of Hydraulic Control Systems
Devices of Pneumatic and Hydraulic Control Units
Three-term Controller Set KB-TsMA
Compact Hydraulic Controllers IAT AN U.S.S.R.
Problems in the Design of Primary Instruments—Differential Pressure Transducers with Force Balance
Electro-Pneumatic Transducers IAT AN U.S.S.R.
Pneumatic Relays with Constant Pressure Differential Restrictions
Improvement of Static Characteristics of Pneumatic Relays by Using Constant Pressure Differential Restrictions
Regulating Final Mechanisms
A Hydraulic Follow-up Power Control Unit for General Industrial Use
Equations of a Stabilizing System, Consisting of a Hydraulic Linear Motor (Ram) Connected to the Control Element by Pipelines
Pneumatic Power Plant
Automatic Compressed Air Plant
Elements of Pneumatic and Hydraulic Devices. Nozzle-baffle Elements
Calculation of Static Characteristics of Nozzle-Baffle Elements
The Results of Experimental and Theoretical Investigations of Control Devices of the Nozzle-Baffle Type
Force of the Jet Action on the Baffle in Pneumatic and Hydraulic Control Units
Theory of Control Devices of the "Nozzle-Baffle" Type, Working with Oil
Diaphragms
Variations of the Effective Areas of Diaphragms
Characteristics of Diaphragms Used in Sensing Elements of Controllers
Elements of Pneumatic and Hydraulic Devices
Hydraulic Loss Coefficients and Discharge Coefficient for the Ports of Spool Valves Used in Hydraulic Control Systems
Network Analysis Applied to Hydraulic Control Systems
Diagrams for Parameters of Steady-state Air Flow through Systems of Orifices in Pneumatic Controllers
Laminar Flow of Air at High Velocities in Flat Capillary Channels
Silting of Small Restrictions
Some Methods of Combating Silting and Ensuring Controlled Flow through Small Restrictions in Hydraulic Control Elements
Author Index
Subject Index
- No. of pages: 250
- Language: English
- Edition: 1
- Published: January 1, 1968
- Imprint: Pergamon
- eBook ISBN: 9781483155890
Read Pneumatic and Hydraulic Control Systems on ScienceDirect