TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY INCORPORATING TRENCHLESS TECHNOLOGY RESEARCH
Guide for Authors
The entire submission and review process for Tunnelling and Underground Space Technology incorporating Trenchless Technology Research
is handled electronically, which shortens publication times. All papers should be submitted electronically through http://ees.elsevier.com/tust
Prior to submitting your paper, please follow the instructions given below. Please note that you must have an e-mail address to use
the online submission system
Authors submit their article online simply by registering, logging-in and submitting. Editors will
then invite potential reviewers by e-mail.
Online Submission: Articles intended for TUST should be
submitted online using our Web-based submission tool. To submit your paper online, please go to http://ees.elsevier.com/tust
and upload your article and its associated artwork. A PDF will be generated and the reviewing process will be carried out using that
PDF. All correspondence between editor and author is performed by e-mail, and paper copies are not required at the original submission
stage. Detailed information on how to submit your article online is included.
The system will convert your manuscript to a PDF for
the review process. Elsevier can accept text files in most standard word-processing formats but Microsoft Word is preferred. Alternatively,
they can be in either LaTex or PostScript. Graphics should be high-resolution and the preferred formats are either TIFF or JPEG. For
further information on the preparation of electronic artwork please refer to the following website: http://Elsevier.com/authorartworkinstructions
Once a paper has been accepted by the Editor and received by Elsevier, authors can track its progress through the system to publication,
via the online author tracking system. To do this go to http://elsevier.com/
General: Types of contributions: Original research papers (preferably no more than 20 double line spaced manuscript
pages including tables and illustrations), reviews, short communications (no more than 10 double line spaced manuscript pages including
tables and figures), letters to the editor, book reviews, news items, calendar inserts.
Discussions: All written discussions must
be received by the Editor within three months of the publication of the paper under discussion.
Original material: Submission
of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published
lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors
and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written
consent of the Publisher.
Editor's requirements: All contributions are read by two or more referees to ensure both
accuracy and relevance, and revisions to the script may thus be required. On acceptance, contributions are subject to editorial amendment
to suit house style. When a manuscript is returned for revision prior to final acceptance, the revised version must be submitted as soon
as possible after the author's receipt of the referees' reports. Revised manuscripts returned after four months will be considered as
new submissions subject to full re-review.
Language Editing: International Science Editing and Asia Science Editing can provide English language and copy editing
services to authors who want to publish in scientific, technical and medical journals and need assistance before they submit their article
or, before it is accepted for publication. Authors can contact these services directly: International Science Editing http://www.internationalscienceediting.com
and Asia Science Editing http://www.asiascienceediting.com or, for more information about language editing services, please
contact authorsupport@elsevier.com who will be happy to deal with any questions.
Please note Elsevier neither endorses
nor takes responsibility for any products, goods or services offered by outside vendors through our services or in any advertising. For
more information please refer to our terms and conditions http://authors.elsevier.com/terms_and_conditions.html.
Detailed
instructions on manuscript preparation and artwork instructions can be found below. The editor reserves the right to return, prior to
refereeing, any manuscripts which do not conform to the instructions for manuscript preparation and artwork instruction, as well as papers
which do not fit the scope of the journal.
Structure: Follow this order when typing manuscripts:
Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements, Appendix, References, Figure Captions and then Tables.
For submission in hardcopy, do not import figures into the text - see Illustrations. Collate acknowledgements in a separate section
at the end of the article and do not include them on the title page, as a footnote to the title or otherwise.
Back
to the contents list
Text Layout: Use double spacing and wide
(3 cm) margins. (Avoid full justification, i.e., do not use a constant right-hand margin.) Ensure that each new paragraph is clearly
indicated. Present tables and figure legends on separate pages at the end of the manuscript. If possible, consult a recent issue of the
journal to become familiar with layout and conventions. Number all pages consecutively. Use 12 or 10 pt font size and standard fonts.
If submitting in hardcopy, print the entire manuscript on one side of the paper only.
Please follow the instructions below for guidance
on the style of the journal. Most formatting codes are removed or replaced when your article is prepared for publication so there is
no need for you to use excessive layout styling. However, please do not use options such as automatic word breaking, justified layout,
double columns or automatic paragraph numbering (especially for numbered references). Do use bold face, italic, subscripts, superscripts,
etc., as appropriate. When preparing tables, if you are using a table grid, please use only one grid for each separate table and not
a grid for each row. If no grid is being used, use tabs to align columns instead of spaces.
Back
to the contents list
Corresponding author: Clearly indicate
who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone
and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Full
postal addresses must be given for all co-authors. Please consult a recent journal paper for style if possible. Back
to the contents list
Abstract: A self-contained abstract
outlining in a single paragraph the aims, scope and conclusions of the paper must be supplied. Back
to the contents list
Keywords: Immediately following the
abstract, provide a maximum of six keywords (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly
established in the field may be eligible. Back to the contents list
Units: Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities
are mentioned, give their equivalent in SI. Back to the contents list
Maths: Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly
in the text). Mathematical symbols and formulae should be typed. Particular care should be exercised in identifying all symbols and in
avoiding ambiguities. Distinction should be made between the number one (1) and letter l, and between the number zero (0) and the letter
O. Equation numbers should appear in parentheses and be numbered consecutively. All equation numbers must appear on the right-hand side
of the equation and should be referred to within the text. Use the following sequence of parentheses: ) ] }.
References: All publications cited in the text should be presented in a list of references following the text of the manuscript.
In the text refer to the author's name (without initials) and year of publication (e.g. "Since Peterson (1993) has shown that..." or
"This is in the agreement with results obtained later (Kramer, 1994)"). For three or more authors use the first author followed by "et
al.", in the text. The list of references should be arranged alphabetically by authors' names. The manuscript should be carefully checked
to ensure that the spelling of authors' names and dates are exactly the same in the text as in the reference list.
References should
be given in the following form: Berenbaum, R., Brodie, L, 1959. The tensile strength of coal. J. Inst. Fuel 32, 320-327. Cording,
E.J., Deere, D.U., 1972. Rock tunnel supports and field, measurements. Proceedings, Rapid Excavation and Tunnelling Conference, Vol.
1, pp. 601-622. Frocht, M.M., 1948. Photoelasticity, Vol 11. Wiley and Sons, New York, p. 127. Back
to the contents list
Free Online Colour: If, together with your accepted article, you submit usable colour and black/white figures then Elsevier will ensure, at no additional
charge, that these figures will appear in colour on the web (e.g., ScienceDirect and other sites) regardless of whether or not these
illustrations are reproduced in colour in the printed version. ' Usable' means the formats comply with our instructions. See the information
about Illustrations at http://Elsevier.com/authorartworkinstructions For colour illustrations in the print journal see
Colour Costs above. Back to the contents list
Tables: Tables should be numbered consecutively and given suitable caption and each table should begin on a new page.
No vertical rules should be used. Tables should not duplicate results presented elsewhere in the manuscript (for example, in graphs).
Footnotes to tables should be typed below the table and should be referred to by superscript lowercase letters. Back
to the contents list
Authors will be notified of
the acceptance of their paper by the editor. The Publisher will also send a notification of receipt of the paper in production. Back
to the contents list
All authors must sign the Transfer
of Copyright Agreement before the article can be published. This transfer agreement enables Elsevier to protect the copyrighted material
for the authors, but does not relinquish the authors' proprietary rights. The copyright transfer covers the exclusive rights to reproduce
and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of similar nature and
translations. Authors are responsible for obtaining from the copyright holder permission to reproduce any figures for which copyright
exists. For more information please go to our copyright page http://www.elsevier.com/copyright.
One set of page proofs in PDF format
will be sent by e-mail to the corresponding author, to be checked for typesetting/editing. Proofreading is solely the author's responsibility.
You should note any corrections and return the proofs within 48 hours. Answer any queries in full. Please correct factual errors only,
or errors introduced by typesetting. No changes in, or additions to, the accepted (and subsequently edited) manuscript will be allowed
at this stage. For more information on proofreading please go to our proofreading page http://www.elsevier.com/locate/guidepublication .
Please note that once your paper has been
proofed we publish the identical paper online as in print. Back to the contents list
No page charges: Publication in this journal is free
of charge.
Free Online Offprints:The corresponding author will be provided with a PDF file of the article via e-mail. The
PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining
the terms and conditions of use.
Author Discount: Contributors to Elsevier journals are entitled to a 30% discount on all
Elsevier books except Major Reference Works. See http://www.elsevier.com/bookauthors for more information.
