Guide for Authors
Official Journal of the Swedish Association of Midwives
*** LAUNCHING JANUARY 2010! *** SUBMIT YOUR ARTICLE TODAY! ***
Aim
Sexual and Reproductive
Healthcare is a peer-reviewed, quarterly, multidisciplinary journal of the Swedish Association of Midwives. It is a global forum
for health research and policy topics. It publishes original research, scientifically-based review articles, and invited editorials and
commentaries related to sexual and reproductive health care. Studies with various methodologies are welcome.
The journal welcomes
original papers in all aspects of sexual and reproductive health including family planning and counseling, management of pregnancy, labour
and birth, breastfeeding, postnatal care, parenthood, abortion, infertility and IVF, sexually transmitted diseases and HIV prevention,
and issues related to the menopausal and post-menopausal years. Also welcome would be topics such as cultural, educational, historical
and professional aspects of reproductive and sexual health.
The journal audience would include researchers, social scientists, health
care providers as well as policy and decision makers in sexual and reproductive health.
Types of Paper
Original articles: a full-length report of original basic or clinical investigation (3000-5000
words including tables, up to 30 references). A structured abstract of no more than 250 words with the following sections (objectives,
study design, main outcome measures, results, conclusions) is required. The rest of the paper should be structured as follows: Introduction,
Methods, Results, Discussion, References.
Short communications must not exceed 1,000 words with no more than one table
or illustration and five references. An unstructured abstract of no more than 100 words is required. The text should be structured in
four parts: Introduction, Methods, Results and Discussion.
Review articles: a comprehensive review of prior publications
relating to an important clinical subject (2000-3000 words and 30-50 references). An unstructured abstract of no more than 250 words
is required. The Introduction should indicate why the topic is important and should state the specific objective(s) of the review. The
Conclusion should include the clinical implications and observations regarding the need for additional research.
Guest editorials:
must not exceed 1,000 words and five references.
Letters to the Editor: a question or challenge to an article published
recently in
Sexual and Reproductive Healthcare. Letters must be received within 6 weeks of publication of the article to which
they refer and should be no longer than 250 words.
Contact Details for Submission
Submission of manuscripts proceeds entirely online at
http://ees.elsevier.com/srhc
Ethics in Publishing
For information
on Ethics in Publishing and Ethical guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Policy and Ethics
All
manuscripts reporting data from studies involving human participants should include a statement that the research protocol was approved
by the relevant institutional review board or ethics committees. Please state in the Method section the manner in which informed consent
was obtained from the participants. The work described in your article must have been carried out in accordance with The Code of Ethics
of the World Medical Association (Declaration of Helsinki) for experiments involving humans
http://www.wma.net/e/policy/b3.htm
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest
including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted
work that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without
the written consent of the copyright-holder.
Contributors
Submission of
multi-authored manuscripts to this journal requires the consent of each author and all have to sign the covering letter. All authors
of, and all contributors must specify their individual contributions at the end of the text. The following format is suggested: "I declare
that I participated in the (here list contributions made to the study) and that I have seen and approved the final version. I have the
following conflicts of interest" (list here all relevant conflicts and source of funding). This should be listed in the "Comments" field
in EES.
Copyright
Upon acceptance of an article, authors will be asked
to complete a 'Journal Publishing Agreement' (for more information on this and copyright see
http://www.elsevier.com/copyright).
Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding
author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this
agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation
within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other
derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions). If excerpts
from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s)
in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the
funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation
of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation
of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such
involvement then this should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose
articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://www.elsevier.com/languagepolishing or our customer support site at
http://epsupport.elsevier.com
for more information. Please note Elsevier neither endorses nor takes responsibility for any products, goods or services offered by outside
vendors through our services or in any advertising. For more information please refer to our Terms & Conditions:
http://www.elsevier.com/termsandconditions.
Patient details
Unless you have written permission from the patient (or, where applicable, the next
of kin), the personal details of any patient included in any part of the article and in any supplementary materials (including all illustrations
and videos) must be removed before submission. For further information see
http://www.elsevier.com/patientphotographs.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through the
creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used
in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review
process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's
decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Referees
To expedite the review process Authors are encouraged to provide the editorial office with the names and email
addresses of two potential referees that are able to competently review the article submitted for possible publication. The referees
are not to be associated with or involved with the article in any way or be from the same institution as the author(s) involved with
the article.
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor used.
The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed
and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words.
However, do use bold face, italics, subscripts, superscripts etc. Do not embed "graphically designed" equations or tables, but prepare
these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual
table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared
in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication).
Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on
the manuscript. See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the
"spell-check" and "grammar-check" functions of your wordprocessor.
Article structure
Subdivision - numbered sections
Divide your article into clearly
defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in
section numbering). Use this numbering also for internal cross-referencing: do not just refer to "the text". Any subsection may be given
a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Materials and Methods
The Methods section should describe the research methodology in sufficient detail
that others could reasonably be expected to be able to duplicate the work. However, if the methodology has been previously published,
the appropriate reference should be cited, and a full description is not required. Methods of statistical analysis should be identified
and, when appropriate, the basis for their selection stated. Statistical software programs used should be cited in the text.
P
values should be expressed to no more than three decimal places. For qualitative studies, please explain all steps in the process of
analysis so that the reader is able to follow.
Results
The Results section
should present the findings in appropriate detail. Tables and figures may be used, but duplication between text and tables or figures
is to be avoided. If quotations are used, please limit the number
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often
appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of
a Discussion or Results and Discussion section.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations
and formulae where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a
double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names.
Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address.
Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also
post-publication.
Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address
and the complete postal address.
•
Present/permanent address.
If an author has moved since the work described
in the article was done, or was visiting at the time, a "Present address" (or "Permanent address") may be indicated as a footnote to
that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript
Arabic numerals are used for such footnotes.
Abstract
A concise and factual
abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An
abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided,
but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential
they must be defined at their first mention in the abstract itself.
Keywords
Immediately
after the abstract, provide a maximum of 6 keywords and avoid general and plural terms and multiple concepts (avoid, for example, "and",
"of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used
for indexing purposes.
Abbreviations
Define abbreviations that are not
standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract
must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references
and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided
help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Nomenclature and units
Follow internationally accepted rules and conventions: use the international system
of units (SI). If other quantities are mentioned, give their equivalent in SI. You are urged to consult IUPAC: Nomenclature of Organic
Chemistry:
http://www.iupac.org/ for further information.
Accession numbers
Accession numbers are unique identifiers in bioinformatics allocated to nucleotide and protein sequences to allow tracking of
different versions of that sequence record and the associated sequence in a data repository [e.g., databases at the National Center for
Biotechnical Information (NCBI) at the National Library of Medicine ('GenBank') and the Worldwide Protein Data Bank]. There are different
types of accession numbers in use based on the type of sequence cited, each of which uses a different coding. Authors should explicitly
mention the
type of accession number together with the actual number, bearing in mind that an error in a letter or number can
result in a dead link in the online version of the article. Please use the following format: accession number type ID: xxxx (e.g., MMDB
ID: 12345; PDB ID: 1TUP). Note that in the final version of the
electronic copy, accession numbers will be linked to the appropriate
database, enabling readers to go directly to that source from the article.
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many
wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes
in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics"
or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number
the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
•
Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit
each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications
please supply "as is".
Please do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation)
document;
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
•
Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office
files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure,
at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed version.
For color reproduction in print, you will receive information
regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on
the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version
should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached
to the figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep
text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the
table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that
the data presented in tables do not duplicate results described elsewhere in the article.
References
Authors are responsible for the accuracy of references. The 'Vancouver' style is used. References appearing
for the first time in a table or figure should be cited in the text where the table or figure is mentioned.
Citation in text
Please ensure that every reference cited in the text is also present in the reference
list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are
not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they
should follow the standard reference style of the journal and should include a substitution of the publication date with either "Unpublished
results" or "Personal communication" Citation of a reference as "in press" implies that the item has been accepted for publication.
Web references
As a minimum, the full URL should be given. Any further information, if known (DOI,
author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after
the reference list) under a different heading if desired, or can be included in the reference list.
Reference style
Text: Indicate references by number(s) in square brackets in line with the
text. The actual authors can be referred to, but the reference number(s) must always be given.
Example: "..... as demonstrated [3,6].
Barnaby and Jones [8] obtained a different result ...."
List: Number the references (numbers in square brackets) in the
list in the order in which they appear in the text.
Examples:
Reference to a journal publication:
[1] J. van der
Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun. 163 (2000) 51-59.
Reference to a book:
[2] W. Strunk Jr., E.B. White, The Elements of Style, third ed., Macmillan, New York, 1979.
Reference to a chapter in an edited
book:
[3] G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction
to the Electronic Age, E-Publishing Inc., New York, 1999, pp. 281-304.
Journal
abbreviations source
Journal names should be abbreviated according to
Index Medicus journal abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of serial title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Supplementary material
Elsevier
accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional
possibilities to publish supporting applications, movies, animation sequences, high-resolution images, background datasets, sound clips
and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products,
including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable,
please ensure that data are provided in one of our recommended file formats. Authors should submit the material in electronic format
together with the article and supply a concise and descriptive caption for each file. Video files: please supply 'stills' with your files:
you can choose any frame from the video or make a separate image. These will be used instead of standard icons and will personalize the
link to your supplementary information. For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article
prior to sending it to the journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure
that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full
postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Keywords
• All figure
captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked"
and "grammar-checked"
• References are in the correct format for this journal
• All references mentioned in the Reference
list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources
(including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge)
and in print or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the
Web is required, black and white versions of the figures are also supplied for printing purposes
For any further information please
visit our customer support site at
http://epsupport.elsevier.com.
Additional
information
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents.
The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic
publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press'
because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example
taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to
create URL hyperlinks to documents on the web, they are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address
then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves.
Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher)
available free from
http://www.adobe.com/products/acrobat/readstep2.html. Instructions on how to annotate PDF files will
accompany the proofs (also given online). The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return
them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark
the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the
pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text,
tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission
from the Editor. We will do everything possible to get your article published quickly and accurately. Therefore, it is important to ensure
that all of your corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent
corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of
your article if no response is received.
Offprints
The corresponding author,
at no cost, will be provided with a PDF file of the article via e-mail. The PDF file is a watermarked version of the published article
and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use. Additional paper
offprints can be ordered by the authors. An order form with prices will be sent to the corresponding author.
For inquiries relating to the submission of articles (including electronic submission
where available) please visit this journal's homepage. You can track accepted articles at
http://www.elsevier.com/trackarticle
and set up e-mail alerts to inform you of when an article's status has changed. Also accessible from here is information on copyright,
frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating
to proofs, will be provided by the publisher.
Home | Elsevier Sites | Privacy Policy | Terms and Conditions | Feedback | Site Map | A Reed Elsevier Company