Former title: International Journal of the Sociology of Law

SUBMISSION OF ARTICLES

General
The original plus two duplicate manuscripts should be sent to:

International Journal of Law, Crime and Justice
Professor Stephen P. Savage
Institute of Criminal Justice Studies
University of Portsmouth
Ravelin House
Ravelin Park Museum Road
Portsmouth, PO1 2QQ, UK

It is essential to give a fax number and e-mail address when submitting a manuscript. Articles must be written in good English.

Submission to the journal prior to acceptance
Three copies of the manuscript, including one set of high-quality original illustrations (where applicable), suitable for direct reproduction, should be submitted. (Copies of the illustrations are acceptable for the other sets of manuscripts as long as the quality permits refereeing).

Electronic format requirements for accepted articles
General Points
We accept most wordprocessing formats, but Word or WordPerfect is preferred. An electronic version of the text should be submitted together with the final hardcopy of the manuscript. The electronic version must match the hardcopy exactly. Always keep a backup copy of the electronic file for reference and safety. Label storage media with your name, journal title, and software used. Save your files using the default extension of the program used. No changes to the accepted version are permissible without the explicit approval of the Editor. Electronic files can be stored on 3½ inch diskette, ZIP-disk or CD (either MS-DOS or Macintosh).

Word processor Documents
It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also: http://www.elsevier.com/authors). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Preparation of electronic illustrations.

To avoid unnecessary errors you are strongly advised to use the "spellchecker" function of your wordprocessor.

Although Elsevier can process most wordprocessor file formats, should your electronic file prove to be unusable, the article will be typeset from the hardcopy printout.

Preparation of Text

Presentation of manuscript
General
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Italics are not to be used for expressions of Latin origin, for example, in vivo, et al., per se. Use decimal points (not commas); use a space for thousands (10 000 and above).

Authors in Japan please note that, upon request, Elsevier Japan will provide authors with a list of people who can check and improve the English of their paper (before submission). Please contact our Tokyo office: Elsevier, 4F Higashi-Azabu, 1 Chome Bldg, 1-9-15 Higashi-Azabu, Minato-ku, Tokyo 106-0044, Japan; phone: (03)-5561-5032; fax: (03)-5561-5045; Email: jp.info@elsevier.com.

Print the entire manuscript on one side of the paper only, using double spacing and wide (3 cm) margins. (Avoid full justification, i.e., do not use a constant right-hand margin.) Ensure that each new paragraph is clearly indicated. Present tables and figure captions on separate pages at the end of the manuscript. If possible, consult a recent issue of the journal to become familiar with layout and conventions. Number all pages consecutively.

Manuscripts should be type-written, and contain approximately 5000 - 7000 words ('lead' articles, 1500 - 3000 words). Provide the following data on the title page (in the order given):

Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations where possible.

Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the Authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the Author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each Author.

Corresponding Author. Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.

Present/permanent address. If an Author has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent address") may be indicated as a footnote to that Author's name. The address at which the Author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

A shortened title. Authors are requested to provide an abbreviated title not exceeding 40 characters including spaces; this will be printed at the top of each page of the article.

Abstract. A concise and factual abstract is required (maximum length 150 words). The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separate from the article, so it must be able to stand-alone. References should therefore be avoided, but if essential, they must be cited in full, without reference to the reference list. Non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.

Abbreviations. Define abbreviations that are not standard in this field at their first occurrence in the article: in the abstract but also in the main text after it. Ensure consistency of abbreviations throughout the article.

Arrangement of the Article
Subdivision of the article. Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ?), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to "the text." Any subsection may be given a brief heading. Each heading should appear on its own separate line.

Introduction. State the objectives of the work and provide an adequate background, avoiding detailed literature survey or a summary of the results.

Conclusion. A short Conclusion section is to be presented.

Acknowledgements. Place acknowledgements, including information on grants received, before the references, in a separate section, and not as a footnote on the title page.

Vitae. Include in the manuscript a short (maximum 100 words) biography of each Author.

Figure captions, tables, figures, schemes. Present these, in this order, at the end of the article. They are described in more detail below. High-resolution graphics files must always be provided separate from the main text file (see Preparation of illustrations).

Text graphics. Present incidental graphics not suitable for mention as figures, plates or schemes at the end of the article and number them "Graphic 1", etc. Their precise position in the text can then be defined similarly (both on the manuscript and in the file). See further under the section, Preparation of illustrations. Ensure that high-resolution graphics files are provided, even if the graphic appears as part of your normal word-processed text file.

Footnotes. Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves on a separate sheet at the end of the article. Do not include footnotes in the Reference list.

Table footnotes. Indicate each footnote in a table with a superscript lowercase letter.

Tables: Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.

Preparation of supplementary data. Elsevier now accepts electronic supplementary material (e-components) to support and enhance your scientific research. Supplementary files offer the Author additional possibilities to publish supporting applications, movies, animation sequences, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please ensure that data is provided in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at the Author Gateway at http://authors.elsevier.com/artwork. Files can be stored on 3? inch diskette, ZIP-disk or CD (either MS-DOS or Macintosh).

References
Responsibility for the accuracy of bibliographic citations lies entirely with the Authors.

Citations in the text: Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that the item has been accepted for publication.

Citations of more than 40 words should be indented.

Citing and listing of Web references. As a minimum, the full URL should be given. Any further information, if known (Author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.

Text: All citations in the text should refer to: 1. Single Author: the Author's name (without initials, unless there is ambiguity) and the year of publication; 2. Two Authors: both Authors' names and the year of publication; 3. Three or more Authors: first Author's name followed by "et al." and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed first alphabetically, then chronologically.

Examples: "as demonstrated (Allan, 1996a, 1996b, 1999; Allan and Jones, 1995). Kramer et al. (2000) have recently shown ...."

List: References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same Author(s) in the same year must be identified by the letters "a", "b", "c", etc., placed after the year of publication.

Examples:

Reference to a journal publication:

Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2000. The art of writing a scientific article. J. Sci. Commun. 163, 51-59.

Reference to a book:

Strunk Jr., W., White, E.B., 1979. The Elements of Style, third ed. Macmillan, New York.

Reference to a chapter in an edited book:

Mettam, G.R., Adams, L.B., 1999. How to prepare an electronic version of your article, in: Jones, B.S., Smith, R.Z. (Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281-304.

Preparation of Illustrations
Preparation of electronic illustrations Submitting your artwork in an electronic format helps us to produce your work to the best possible standards, ensuring accuracy, clarity and a high level of detail.
General points
• Always supply high-quality printouts of your artwork, in case conversion of the electronic artwork is problematic.
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Helvetica, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files, and supply a separate listing of the files and the software used.
• Provide all illustrations as separate files and as hardcopy printouts on separate sheets.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.

Files can be stored on 3? inch diskette, ZIP-disk or CD (either MS-DOS or Macintosh). A detailed guide on electronic artwork is available on our website: http://www.elsevier.com/artworkinstructions. You are urged to visit this site.

Non-electronic illustrations Provide all illustrations as high-quality printouts, suitable for reproduction (which may include reduction) without retouching. Number illustrations consecutively in the order in which they are referred to in the text. They should accompany the manuscript, but should not be included within the text. Clearly mark all illustrations on the back (or - in case of line drawings - on the lower front side) with the figure number and the Author's name and, in cases of ambiguity, the correct orientation. Mark the appropriate position of a figure in the article.

Captions: Ensure that each illustration has a caption. Supply captions on a separate sheet, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.

Line drawings: Supply high-quality printouts on white paper produced with black ink. The lettering and symbols, as well as other details, should have proportionate dimensions, so as not to become illegible or unclear after possible reduction; in general, the figures should be designed for a reduction factor of two to three. The degree of reduction will be determined by the Publisher. Illustrations will not be enlarged. Consider the page format of the journal when designing the illustrations. Photocopies are not suitable for reproduction. Do not use any type of shading on computer-generated illustrations.

Photographs (halftones): Please supply original photographs for reproduction, printed on glossy paper, very sharp and with good contrast. Remove non-essential areas of a photograph. Do not mount photographs unless they form part of a composite figure. Where necessary, insert a scale bar in the illustration (not below it), as opposed to giving a magnification factor in the caption. Note that photocopies of photographs are not acceptable.

Proofs
When your manuscript is received by the Publisher it is considered to be in its final form. Proofs are not to be regarded as "drafts". One set of page proofs in PDF format will be sent by e-mail to the corresponding Author, to be checked for typesetting/editing. No changes in, or additions to, the accepted (and subsequently edited) manuscript will be allowed at this stage. Proofreading is solely your responsibility. A form with queries from the copyeditor may accompany your proofs. Please answer all queries and make any corrections or additions required. The Publisher reserves the right to proceed with publication if corrections are not communicated. Return corrections within 3 days of receipt of the proofs. Should there be no corrections, please confirm this.

Elsevier will do everything possible to get your article corrected and published as quickly and accurately as possible. In order to do this we need your help. When you receive the (PDF) proof of your article for correction, it is important to ensure that all of your corrections are sent back to us in one communication. Subsequent corrections will not be possible, so please ensure your first sending is complete. Note that this does not mean you have any less time to make your corrections, just that only one set of corrections will be accepted.

Authors' benefits
• No page charges
• Free Offprints: The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
• 30% discount on Elsevier books

Author enquiries
Authors can keep track on the progress of their accepted article, and set up e-mail alerts informing them of changes to their manuscript's status, by using the "Track a Paper" feature of Elsevier's Author Gateway. Please visit http://authors.elsevier.com

Full details of electronic submission and formats can also be obtained from http://authors.elsevier.com

Contact details for questions arising after acceptance of an article, especially those relating to proofs, are provided when an article is accepted for publication.

Book Reviews
Publishers are invited to send books for review in this journal to: Dr Colin Webster, School of Social Sciences, University of Teesside, Middlesbrough, Cleveland, TS1 3BA, U.K. Book reviews will be approximately 800 words and publishers will receive copies of the reviews after publication.