It is a condition
of publication that all manuscripts must be written in clear and grammatically correct English and be submitted to the International
Journal of Impact Engineering electronic submission site at http://ees.elsevier.com/ie Authors are requested
to transmit the text and art of the manuscript in electronic form to this address. Each manuscript must also be accompanied by a cover
letter outlining the basic findings of the paper and their significance. Hardcopy submissions are no longer accepted.
Prior to submitting
your paper, please follow the instructions given below. Please note that you must have an e-mail address to use the online submission
system. Authors submit their article online simply by registering, logging-in, and submitting.
The system automatically converts
source files to a single Adobe Acrobat PDF version of the article, which is used in the peer-review process. Please note that even though
manuscript source files are converted to PDF at submission for the review process, these source files are needed for further processing
after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail,
removing the need for a hard-copy paper trail.
Detailed instructions on the use of the online submission system are available at
http://ees.elsevier.com/ie
Please read the "Hints" for information on how to register, and review the "Tutorial
for Authors" for a run-through of the submission process. If you need any further help, please do not hesitate to contact our Author
Support Department: authorsupport@elsevier.com
Types
of contributions: Original research papers and occasional reviews, short communications, calendar inserts and book reviews.
NOTE:
Authors contributing to special issues should ensure that they make the appropriate selections from the Article Type menu and from the
Request Editor menu.
Corresponding author: Clearly indicate who is willing to handle correspondence at all stages of refereeing
and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition
to the e-mail address and the complete postal address. Full postal addresses must be given for all co-authors. Please consult a
recent journal paper for style if possible.
Original material: Submission of an article implies that the work described
has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is
not under consideration for publication elsewhere, that its publication is approved by all authors and that, if accepted, it will not
be published elsewhere in the same form, in English or in any other language, without the written consent of the copyright-holder. The
covering letter should state that 'this is an original paper which has neither previously, nor simultaneously, in whole or in part been
submitted anywhere else'. Upon acceptance of an article, authors will be asked to sign a 'Journal Publishing Agreement' (for
more information on this and copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the
widest possible dissemination of information. An e-mail (or letter) will be sent to the corresponding author confirming receipt of the
manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement. Subscribers may
reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission
of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations
and translations (please consult http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included,
the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted
forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Funding body agreements
and policies Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published
by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more
about existing agreements and policies please visit http://www.elsevier.com/fundingbodies
Authors' rights As an author you (or your employer or institution) retain certain rights; for details you are referred to: http://www.elsevier.com/authorsrights.
Editors' requirements: Manuscripts of a length exceeding 30 A4 pages (text and figures) will not be acceptable unless
prior arrangement has been made with the Editor.
Authors should aim to produce a manuscript that can be reviewed on its own, without
assuming that earlier or later parts will be published. The authors of companion papers should inform the Editor why they wish to publish
their work in two parts.
Detailed instructions on manuscript preparation and artwork instructions can be found below. The editor
reserves the right to return manuscripts that do not conform to the instructions for manuscript preparation and artwork instruction,
as well as papers that do not fit the scope of the journal or that do not reach a sufficient standard of scientific content, prior to
refereeing.
Manuscript Preparation:
General: Editors
reserve the right to adjust style to certain standards of uniformity. Please use Word, Word Perfect or LaTeX files for the text of your
manuscript that you upload onto the submission site. (For further information about LaTex submission, please go to http://www.Elsevier.com/locate/latex.)
Back to contents list
Structure: Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements, Appendix,
References, Vitae, Figure Captions and then Tables. Collate acknowledgements in a separate section at the end of the article and do not
include them on the title page, as a footnote to the title or otherwise. Back to the contents list
Text Layout: Use a single column format, double spacing and wide margins,
and avoid full justification. Ensure that each new paragraph is clearly indicated. Table and figures may be presented with captions within
the main body of the manuscript, and additionally figures should be uploaded as high resolution files if possible. Consult a recent issue
of the journal to become familiar with layout and conventions. Number all pages consecutively, use 12 or 10 pt font size and standard
fonts. Back to the contents list
Abstract: A self-contained abstract outlining in a single paragraph the aims, scope and conclusions of the paper must
be supplied. Back to the contents list
Keywords: Immediately after the abstract, authors must provide four or five keywords (avoid, for example, 'and', 'of').
Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. Back
to the contents list
Symbols: Notation should conform to that
most frequently used in the engineering field concerned. Particular care should be exercised in identifying all symbols and in avoiding
ambiguities. Distinction should be made between the number one (1) and the letter l, and between zero (0) and the letter O. Vectors and
tensors should be marked clearly on the manuscript. Back to the contents list
Units: Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities
are mentioned, give their equivalent in SI. Back to the contents list
Maths: Detailed mathematical discussion should be placed in an appendix. Equations and formulae should be typed and
numbered consecutively with Arabic numerals in parentheses on the right hand side of the page (if referred to explicitly in the text).
Back to the contents list
References: All publications cited in the text should be presented in a list of references following the text of the manuscript. In the text
refer to references by a number in square brackets on the line (e.g. Since Volt[1]), and the full reference should be given in a numerical
list at the end of the paper including where appropriate volume and page numbers.
References should be given in the following form:
1. Volt A. Impact loading on fibre metal laminates. Int J Impact Engng 1996;18(3):291-307. 2. Williams JG. High speed fracture
in polymers and composites. In: Karihaloo BL, Mai Y-W, Ripley MI, Ritchie RO, editors. Proceedings of the Ninth International Conference
on Fracture. Sydney (NSW, Australia): Pergamon, 1997. p. 2825-2832. 3. Marquis, G, Solin J, editors. Fatigue Design of Components.
Oxford: Elsevier, 1997. 4. Perzyna P. Dynamic localized fracture in inelastic solids. In: Voyiadjis GZ, Ju J-W, Chaboche J-L, editors.
Damage Mechanics in Engineering Materials. Oxford: Elsevier, 1998. p. 183-202.
Back to the contents
list
The digital
object identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string
which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore,
it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic
information.
The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters
B): doi:10.1016/j.physletb.2003.10.071 When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed
never to change. Back to the contents list
FREE ONLINE COLOUR If, together with your accepted article, you submit
usable colour and black/white figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on
the web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed
version. ' Usable' means the formats comply with our instructions. See the information about Illustrations at http://authors.Elsevier.com/locate/authorartwork
. For colour illustrations in the print journal see colour costs above. Back to the contents list
Tables: Tables should be numbered consecutively and given suitable caption
and each table is laid out on a new page. No vertical rules should be used. Tables should not duplicate results presented elsewhere
in the manuscript (for example, in graphs). Footnotes to tables should be typed below the table and should be referred to by superscript
lowercase letters. Back to the contents list
Electronic
Annexes Authors may submit electronic annexes, such as short videos, computer-enhanced images, audio clips and
large databases. Please refer to the Artwork Instructions (Multimedia files) at http://authors.elsevier.com/locate/authorartwork
for details on file types to be used. In the text of your article you may wish to refer to the annex. This is not mandatory, however,
if you do wish to refer to the annex in the text then please do so using this example: " see Electronic Annex 1 in the online version
of this article." Production will insert the relevant URL at the typesetting stage after this statement. Back
to the contents list
Authors will be notified of
the acceptance of their paper by the editor. The Publisher will also send a notification of receipt of the paper in production. Back
to the contents list
All authors must sign the Transfer
of Copyright agreement before the article can be published. This transfer agreement enables Elsevier to protect the copyrighted material
for the authors, but does not relinquish the authors' proprietory rights. The copyright transfer covers the exclusive rights to reproduce
and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of similar nature and
translations. Authors are responsible for obtaining copyright from the holder permission to reproduce any figures for which copyright
exists. For more information please go to our copyright page http://authors.elsevier.com/quickguide"target="_blank.
Back to the contents list
One set of page proofs in PDF format will be sent by e-mail to the corresponding author, to be checked for typesetting/editing. The
corrections should be returned within 48 hours. No changes in, or additions to, the accepted (and subsequently edited) manuscript will
be allowed at this stage. Proofreading is solely the author's responsibility. Any queries should be answered in full. Please only correct
factual errors, or errors introduced by typesetting. For more information on proofreading please go to our proofreading page http://authors.elsevier.com/quickguide"target="_blank.
Please note that once your paper has been proofed we publish the identical
paper online as in print. Back to the contents list
No page charges: Publications in this journal is free of charge.
Free Offprints:
Twenty-five offprints will be supplied free of charge. Corresponding authors will be given the choice to buy extra offprints before
printing of the article. Authors who pay for colour illustrations will receive an extra fifty offprints free of charge.
