Guide for Authors
A Safety and Health Research Forum
A Joint Publication of the National Safety Council
http://www.nsc.org and Elsevier
See also Elsevier's
Safety Research programme home
Journal of Safety Research is an interdisciplinary publication that provides for the exchange
of ideas and data developed through research experience in all areas of safety including traffic, industry, farm, home, school and public.
Articles may deal with a variety of topics such as human error and accidents, methods of accident investigation and analysis, evaluative
examination of accident countermeasures or the relation between man-machine environment factors and hazards.
Ethics in Publishing
For information
on Ethics in Publishing and Ethical guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All
authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships
with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived
to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except
in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without
the written consent of the copyright-holder.
Copyright
Upon acceptance
of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright see
http://www.elsevier.com/copyright).
Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding
author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this
agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation
within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other
derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions). If excerpts
from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s)
in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the
funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation
of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation
of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such
involvement then this should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose
articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://www.elsevier.com/languagepolishing or our customer support site at
http://epsupport.elsevier.com
for more information. Please note Elsevier neither endorses nor takes responsibility for any products, goods or services offered by outside
vendors through our services or in any advertising. For more information please refer to our Terms & Conditions:
http://www.elsevier.com/termsandconditions.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through
the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is
used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the
review process, these source files are needed for further processing after acceptance. All correspondence, including notification of
the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submission Site for
Journal of Safety Research
To submit your paper please click here http://www.ees.elsevier.com/jsr
Authors who are unable to provide an electronic version or have other circumstances that prevent online submission
must contact the Editorial Office prior to submission to discuss alternate options: Katie Porretta, Managing Editor, Journal of Safety
Research, National Safety Council, 1121 Spring Lake Drive, Itasca, IL USA 60143-3201. Fax 630-285-0242, Phone 630-775-2323, E-mail
Katie.Porretta@nsc.org
Authors can also submit their articles electronically via the homepage of this journal (
http://www.elsevier.com/journals).
The system automatically converts source files to a single Adobe Acrobat PDF version of the article, which is used in the peer-review
process. Please note that even though manuscript source files are converted to PDF at submission for the review process, these source
files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests
for revision, takes place by e-mail and via the author's homepage, removing the need for a hard-copy paper trail.
Note that contributions
may be either submitted online or sent by mail. Please do NOT submit via both routes. This will cause confusion and may lead to your
article being reviewed and published twice!
Additional information
Use of wordprocessing software
It
is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep
the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular,
do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts
etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables,
if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs,
not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also
the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Do not import the figures into the text
file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on
Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions
of your wordprocessor.
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should
be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for
internal cross-referencing: do not just refer to "the text". Any subsection may be given a brief heading. Each heading should appear
on its own separate line.
Introduction
State the objectives of the
work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already
published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt with in
the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from
a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined
Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which
may stand alone or form a subsection of a Discussion or Results and Discussion section.
Inpact on Industry
We also ask that each author include a section at the end of the manuscript that explains
the topic's "Impact on Industry".
Appendices
If there is more than
one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1),
Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on.
Essential title page
information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems.
Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name may be
ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was
done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front
of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail
address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages
of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers (with country and area code) are provided
in addition to the e-mail address and the complete postal address.
•
Present/permanent address.
If an author
has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent address")
may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main,
affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results
and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason,
References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should
be avoided, but if essential they must be defined at their first mention in the abstract itself.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general
and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established
in the field may be eligible. These keywords will be used for indexing purposes.
Biographical sketch
A short biographical sketch (4-5 sentences) of each author should also be submitted noting educational
background, present and past employment, and research interests.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations
that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of
abbreviations throughout the article.
Acknowledgements
Collate acknowledgements
in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote
to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing
assistance or proof reading the article, etc.).
Math formulae
Present
simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms,
e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively
any equations that have to be displayed separately from the text (if referred to explicitly in the text).
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript
Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate
the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes
in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics"
or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number
the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
•
Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit
each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications
please supply "as is".
Please do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation)
document;
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
•
Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office
files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure,
at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed version.
For color reproduction in print, you will receive information
regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on
the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version
should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached
to the figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep
text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the
table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that
the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference
cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full.
Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these
references are included in the reference list they should follow the standard reference style of the journal and should include a substitution
of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that
the item has been accepted for publication.
Web references
As a minimum,
the full URL should be given. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.),
should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired,
or can be included in the reference list.
All references must be formatted
in accordance with the Publication Manual of the American Psychological Association (APA), Fourth Edition. For Example:
Journal Articles:
Smith, A.B., Adams, K.D., & Jones, L.J.(1992). The hazards of living in a Volcano. Journal of Safety Research, 23(1), 81-94.
Book:
Perez, A.K., Little, T.H., & Brown Y.J. (1999). Safety in numbers. Itasca, IL: National Safety Council.
See the APA manual for
more detailed instructions.
Journal abbreviations source
Journal
names should be abbreviated according to
Index Medicus journal abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of serial title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Supplementary material
Elsevier
accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional
possibilities to publish supporting applications, movies, animation sequences, high-resolution images, background datasets, sound clips
and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products,
including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable,
please ensure that data are provided in one of our recommended file formats. Authors should submit the material in electronic format
together with the article and supply a concise and descriptive caption for each file. Video files: please supply 'stills' with your files:
you can choose any frame from the video or make a separate image. These will be used instead of standard icons and will personalize the
link to your supplementary information. For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article
prior to sending it to the journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure
that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full
postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Keywords
• All figure
captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked"
and "grammar-checked"
• References are in the correct format for this journal
• All references mentioned in the Reference
list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources
(including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge)
and in print or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the
Web is required, black and white versions of the figures are also supplied for printing purposes
For any further information please
visit our customer support site at
http://epsupport.elsevier.com.
Authors may include the name, address, and phone numbers of experts that they feel are good candidates to review the manuscripts.
Use of the Digital Object Identifier
The
Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character
string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore,
it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic
information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters
B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed
never to change.
Proofs
One set of page proofs (as PDF files) will be
sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will
be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can
be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from
http://www.adobe.com/products/acrobat/readstep2.html.
Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the
Adobe site:
http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations
function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your
corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including
replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof
only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the
article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible
to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back
to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed.
Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail
or, alternatively, 25 free paper offprints. The PDF file is a watermarked version of the published article and includes a cover sheet
with the journal cover image and a disclaimer outlining the terms and conditions of use.
Contacts:
Editorial Office: Katie Porretta, Managing Editor, Journal of Safety Research, National Safety Council, 1121
Spring Lake Drive, Itasca, USA, IL, USA 60143-3201. Fax 630-285-0242, Phone 630-775-2323,
E-mail: Katie.Porretta@nsc.org.
Publishing Office: Fianait Mitchell, Journal Manager, Elsevier Ireland Ltd., Elsevier House, Brookvale Plaza, East Park, Shannon,
Co. Clare, Ireland. Fax 353-61-709-111, Phone 353-61-709-639, E-mail:
f.mitchell@elsevier.com.
For inquiries relating to the submission of articles (including electronic submission
where available) please visit this journal's homepage. You can track accepted articles at
http://www.elsevier.com/trackarticle
and set up e-mail alerts to inform you of when an article's status has changed. Also accessible from here is information on copyright,
frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating
to proofs, will be provided by the publisher.
Home | Elsevier Sites | Privacy Policy | Terms and Conditions | Feedback | Site Map | A Reed Elsevier Company