Guide for Authors
Ethics in publishing
For information on Ethics in publishing
and Ethical guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder. If a paper has been published as a full article within a conference
proceedings it will not be considered for publication in the journal.
Submission declaration and verification
Submission
of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published
lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors
and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published
elsewhere in the same form, in English or in any other language, including electronically without the written consent of the copyright-holder.
To verify originality, your article may be checked by the originality detection software iThenticate. See also
http://www.elsevier.com/editors/plagdetect.
Changes to authorship
This policy concerns the addition, deletion, or rearrangement of author names in the
authorship of accepted manuscripts:
Before the accepted manuscript is published in an online issue: Requests to add or remove
an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript
and must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail,
fax, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors,
this includes confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded
by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers
will inform the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until
authorship has been agreed.
After the accepted manuscript is published in an online issue: Any requests to add, delete, or
rearrange author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement'
(for more information on this and copyright see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure
the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript
together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce
tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of
the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations
and translations (please consult
http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included,
the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted
forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained
author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to:
http://www.elsevier.com/authorsrights.
Funding body agreements and policies
Elsevier
has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply
with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements
and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This
journal offers you the option of making your article freely available to all via the ScienceDirect platform. To prevent any conflict
of interest, you can only make this choice after receiving notification that your article has been accepted for publication. The fee
of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions and funding bodies have entered
into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements are available at
http://www.elsevier.com/fundingbodies.
Authors of accepted articles, who wish to take advantage of this option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf).
Whatever access option you choose, you retain many rights as an author, including the right to post a revised personal version of your
article on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://webshop.elsevier.com/languageservices
or our customer support site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally online and
you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single
PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted
to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence,
including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Article type and length
Only full length articles (maximum 9000
words in total, including tables, figures and references) and Research Notes (maximum 2500 words in total) are considered for publication
in the Journal. No other types of contribution are considered for publication.
Use of wordprocessing
software
It is important that the file be saved in the native format of the wordprocessor used.
The text should be double
spaced and in single-column format. The chosen font style and size for the International Journal of Hospitality Management is Times New
Roman size 12. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing
the article.In particular, do not use the wordprocessor'soptions to justify text or to hyphenate words. However, do use bold face, italics,
subscripts, superscripts etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility.
When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row.
Please
provide any tables in a separate file and indicate where the table should appear in the printed article.If no grid is used, use tabs,
not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also
the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Do not import the figures into the text
file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on
Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions
of your wordprocessor.
Article structure
Subdivision - numbered sections
Divide
your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the
abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text'.
Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Introduction
State
the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Theory
A Theory section should extend, not repeat, the background to the article already dealt with in the
Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from a theoretical
basis.
Materials and Methods
Provide sufficient detail to allow the work to be reproduced. Methods already published should
be indicated by a reference: only relevant modifications should be described.
Results
Results
should be clear and concise.
Discussion
This should explore the significance of the results
of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion
of published literature.
Conclusions
The main conclusions of the study may be presented
in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations
in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly
for tables and figures: Table A.1; Fig. A.1, etc.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae
where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name),
please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all
affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide
the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also
post-publication.
Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address
and the complete postal address. Contact details must be kept up to date by the corresponding author.
•
Present/permanent
address.
If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address'
(or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work
must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A
concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major
conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References
should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided,
but if essential they must be defined at their first mention in the abstract itself.
The abstract should not exceed 150 words.
Graphical abstract
A Graphical abstract is optional and should summarize the contents of the article in a
concise, pictorial form designed to capture the attention of a wide readership online. Authors must provide images that clearly represent
the work described in the article. Graphical abstracts should be submitted as a separate file in the online submission system. Image
size: Please provide an image with a minimum of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable
at a size of 5 × 13 cm using a regular screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. See
http://www.elsevier.com/graphicalabstracts for examples.
Authors can make use of Elsevier's Illustration and Enhancement
service to ensure the best presentation of their images also in accordance with all technical requirements:
Illustration Service.
Highlights
Highlights are a short collection
of bullet points that convey the core findings of the article. Highlights are optional and should be submitted in a separate file in
the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including
spaces, per bullet point). See
http://www.elsevier.com/highlights for examples.
Keywords
Immediately
after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts
(avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible.
These keywords will be used for indexing purposes.
Acknowledgements
Include acknowledgements
on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g.,
providing language help, writing assistance or proof reading the article, etc.).
Please avoid including any acknowledgment or personal
information that might identify you in the body of the paper.
Footnotes
The International
Journal of Hospitality Management does not use footnotes.
Artwork
Electronic
artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
•
Save text in illustrations as 'graphics' or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier,
Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention
for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of
the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our
website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the
detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is
finalised, please 'save as' or convert the images to one of the following formats (note the resolution requirements for line drawings,
halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as 'graphics'.
TIFF:
Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000
dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
If your electronic artwork
is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is'.
Please do not:
•
Supply files that are optimised for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are
too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color
artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct
resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge,
that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations
are reproduced in color in the printed version.
For color reproduction in print, you will receive information regarding the costs
from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or on the Web only. For
further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please
note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version should
you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the
figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep text in
the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number
tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them
with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables
do not duplicate results described elsewhere in the article.
References
Citation
in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any
references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference
list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference
style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'.
Citation of a reference as 'in press' implies that the item has been accepted for publication.
Web references
All
web references must provide the date when the reference was last accessed. Any further information if known (DOI, author names, dates,
reference to a source publication etc.), should also be given. Web references must be included in the reference list. Please do not create
a separate list (e.g., after the reference list).
References in a special issue
Please ensure
that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special
Issue.
Reference management software
This journal has standard templates available in key
reference management packages EndNote (
http://www.endnote.com/support/enstyles.asp) and Reference Manager (
http://refman.com/support/rmstyles.asp).
Using plug-ins to wordprocessing packages, authors only need to select the appropriate journal template when preparing their article
and the list of references and citations to these will be formatted according to the journal style which is described below.
Reference Style
Text: Indicate references within the text of the article. Example: "..... Value can be defined
from many different perspectives and may result from tangible and intangible factors (Chou etal, 2006)." Example reference to a journal
publication: Brymer, R.A., Perrewe, P.L., Johns, T.R., 1991. Managerial stress in the hotel industry.International Journal of Hospitality
Management 10 (1), 47-58.
Edited book:
Miller, J.A., 1977. Studying satisfaction, modifying models, eliciting expectations, posing
problems, and making meaningful measurements. In: Hunt, H.K. (Ed.). Conceptualization and Measurement of Consumer Satisfaction and Dissatisfaction.
Marketing Science Institute, Cambridge, MA, pp. 72-91.
Book:
Oliver, R.L., 1997. Satisfaction: A Behavioral Perspective on the
Consumer. Irwin/MaGraw-Hill, New York.
Journal Article:
Slater, S.F., 1997. Developing a customer value-based theory of the firm.
Journal of the Academy of Marketing Science 25(2), 162-167.
Video data
Elsevier accepts
video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that
they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done in the
same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All
submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video
or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size
of 50 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products,
including ScienceDirect:
http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame
from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your
video data. For more detailed instructions please visit our video instruction pages at
http://www.elsevier.com/artworkinstructions.
Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and
the print version for the portions of the article that refer to this content.
Supplementary data
Elsevier
accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional
possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files
supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data
in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply
a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior
to sending it to the journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure
that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Title page as one file, manuscript
without any author information as a separate file, figures and tables as separate files, keywords
• Keywords
• All figure
captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked"
and "grammar-checked"
• References are in the correct format for this journal
• All references mentioned in the Reference
list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources
(including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge)
and in print or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the
Web is required, black and white versions of the figures are also supplied for printing purposes
For any further information please
visit our customer support site at
http://support.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier
(DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned
to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium
for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The
correct format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do
not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download
the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe
Reader version 7 (or higher) available free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files
will accompany the proofs (also given online). The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return
them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark
the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the
pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text,
tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission
from the Editor. We will do everything possible to get your article published quickly and accurately – please let us have all your
corrections within 48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully
before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that
Elsevier may proceed with the publication of your article if no response is received.
Offprints
The
corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can
be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version
of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions
of use.
For inquiries relating to the submission of articles (including
electronic submission) please visit this journal's homepage. Contact details for questions arising after acceptance of an article, especially
those relating to proofs, will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle.
You can also check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
