Guide for Authors
The
Journal of Algebra is a leading international journal and publishes papers that demonstrate high quality research results in algebra
and related computational aspects. Only the very best and most interesting papers are to be considered for publication in the journal.
With this in mind, it is important that the contribution offer a substantial result that will have a lasting effect upon the field. The
journal also seeks work that presents innovative techniques that offer promising results for future research.
Types
of paper
Journal of Algebra publishes carefully selected papers dealing with original research in the field of
algebra. Papers from related research areas which have application to algebra will also be considered.
A special section entitled
Computational Algebra is devoted to papers from all areas of mathematics that use constructive aspects in the creation or development
of a theory, or for solving a problem. Contributions describing applications of algebraic results or methods, for example, in coding
theory, cryptography, or the algebraic theory of differential equations, are highly welcome for this section. However, papers will only
be considered if they represent an advance of mathematics and exhibit new methods and mathematical conclusions. Click here for the New
Section Announcement [J. Algebra, 276 (2004) 1-2].
Manuscripts aimed at the computational section should only be submitted to the
computational editors of the Journal.
Contact details for submission
Authors should submit
their manuscripts via the Elsevier Editorial System (EES), the online submission, peer-review and editorial system for Journal of Algebra:
http://ees.elsevier.com/jalgebra/.
Editor-in-Chief
Michel Broué
Journal of Algebra
UFR de Mathématiques
Université
Paris Diderot, Paris 7
Case 7012, Batiment Chevaleret
75205 Paris Cedex 13, France
E-mail:
jalgebra@univ-paris-diderot.fr
Journal Production Office
Journal of Algebra Production
Elsevier
525 B Street, Suite 1900
San Diego, CA 92101-4495,
USA
Fax: (619) 699-6211
E-mail:
jalgebra@elsevier.com
Ethics in publishing
For information on Ethics in publishing and Ethical guidelines for journal publication
see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Contributors
Each author
is required to declare his or her individual contribution to the article: all authors must have materially participated in the research
and/or article preparation, so roles for all authors should be described. The statement that all authors have approved the final article
should be true and included in the disclosure.
Changes to authorship
This policy concerns
the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the accepted manuscript
is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal
Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added or removed,
or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the addition,
removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed.
Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must
follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests and (2)
publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After the accepted manuscript
is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue
will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon
acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright
see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information.
An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement'
form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles
including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the funding source
You
are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly
describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing
of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this
should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and
policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals
published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To
learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://webshop.elsevier.com/languageservices
or our customer support site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally online and
you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single
PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted
to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence,
including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submit your article
Please submit your article via
http://ees.elsevier.com/jalgebra/
Referees
Please submit, with the manuscript, the names, addresses and e-mail addresses of three potential
referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.
LaTex
If preparing your paper using LaTeX, the article should preferably be written using Elsevier's document
class "elsarticle", or alternatively the standard document class "article".
The Elsevier LaTeX package (including detailed instructions
for LaTeX preparation) can be obtained from the Quickguide:
http://www.elsevier.com/latex or from the Comprehensive TeX
Archive Network (CTAN): see below, in the directory /tex-archive/macros/latex/contrib/supported/elsarticle. It consists of the files:
elsarticle.cls, complete user documentation for the class file; bibliographic style files in various styles; and for users of elsart,
a template file for quick start.
CTAN is an archive with up-to-date copies of all the public-domain versions of TeX, LaTeX, Metafont
and ancillary programs, which is made available via a mirrored network of FTP servers. You can enter the CTAN archive via a web interface
in the UK (
http://www.tex.ac.uk), in the USA
http://www.ctan.org), or in Germany (
http://www.dante.de/software/ctan)
(page in German). You can search for a package on CTAN via
http://www.ucc.ie/cgi-bin/ctan/. You can also enter the archive
via FTP at
ftp://ftp.tex.ac.uk, at
ftp://ftp.dante.de, at
ftp://ctan.tug.org, or at one of the
many mirror servers; see for a list the UK or USA CTAN web pages. When a CTAN server does not respond, please try another one.
Note
that CTAN is not related to Elsevier, and that Elsevier's Customer support cannot accept complaints or answer questions about the availability
of any CTAN server.
Figures may be inserted in the usual way using an \includegraphics command, at the position in the article where
they are cited.
Your LaTeX file will be most useful as input for the printed article if you obey the following rules of thumb:
1.
Be consistent. If you use a macro for a phrase, use it throughout.
2. Use standard LaTeX mark-up. Do not hardcode your own layout
for e.g. section headings, but use the usual LaTeX macro for this purpose.
3. Keep it simple. Do not define macros that accomplish
complicated layout. They will also make the input process complicated.
Article structure
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature
survey or a summary of the results.
Theory/calculation
A Theory section should extend, not
repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast, a
Calculation section represents a practical development from a theoretical basis.
Results
Results
should be clear and concise.
Conclusions
The main conclusions of the study may be presented
in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Essential title page information
•
Title.
Concise and informative. Titles are often used
in information-retrieval systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses
(where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the
author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name
and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle
correspondence at all stages of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers (with country
and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date
by the corresponding author.
•
Present/permanent address.
If an author has moved since the work described
in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to
that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript
Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is
required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is
often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if
essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they
must be defined at their first mention in the abstract itself.
Highlights
Highlights are
a short collection of bullet points that convey the core findings of the article. Highlights are optional and should be submitted in
a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85
characters, including spaces, per bullet point). See
http://www.elsevier.com/highlights for examples.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first
page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as
in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate
acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title
page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language
help, writing assistance or proof reading the article, etc.).
Math formulae
Present simple
formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g.,
X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively
any equations that have to be displayed separately from the text (if referred to explicitly in the text).
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your
original artwork.
• Save text in illustrations as 'graphics' or enclose the font.
• Only use the following fonts in
your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
•
Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images
near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic
artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this
site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when
your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats (note the resolution requirements
for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text
as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings:
use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
If
your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is'.
Please
do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low;
•
Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the
figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep text in
the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Text graphics
Text
graphics may be embedded in the text at the appropriate position. If you are working with LaTeX and have such features embedded in the
text, these can be left. Further, high-resolution graphics files must be provided separately whether or not the graphics are embedded.
See further under Electronic artwork.
Tables
Number tables consecutively in accordance with
their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid
vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere
in the article.
References
Citation in text
Please ensure
that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must
be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in
the text. If these references are included in the reference list they should follow the standard reference style of the journal and should
include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'. Citation of a reference
as 'in press' implies that the item has been accepted for publication.
Web references
As
a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author
names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the
reference list) under a different heading if desired, or can be included in the reference list.
References
in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations
in the text) to other articles in the same Special Issue.
Reference management software
This
journal has standard templates available in key reference management packages EndNote (
http://www.endnote.com/support/enstyles.asp)
and Reference Manager (
http://refman.com/support/rmstyles.asp). Using plug-ins to wordprocessing packages, authors only
need to select the appropriate journal template when preparing their article and the list of references and citations to these will be
formatted according to the journal style which is described below.
Reference style
Text:
Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s)
must always be given.
Example: '..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ....'
List:
Number the references (numbers in square brackets) in the list in the order in which they appear in the text.
Examples:
Reference to a journal publication:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article,
J. Sci. Commun. 163 (2010) 51–59.
Reference to a book:
[2] W. Strunk Jr., E.B. White, The Elements of Style, fourth ed.,
Longman, New York, 2000.
Reference to a chapter in an edited book:
[3] G.R. Mettam, L.B. Adams, How to prepare an electronic
version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 2009, pp.
281–304.
Video data
Elsevier accepts video material and animation sequences to support
and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly
encouraged to include these within the body of the article. This can be done in the same way as a figure or table by referring to the
video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that
they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please
provide the files in one of our recommended file formats with a preferred maximum size of 50 MB. Video and animation files supplied will
be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com.
Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be
used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video
instruction pages at
http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in
the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that
refer to this content.
Supplementary data
Elsevier accepts electronic supplementary material
to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting
applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online
alongside the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com.
In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors
should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file.
For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
The following list will be useful during the final checking of an article prior to sending
it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following
items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded, and contain:
•
Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
•
Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
•
All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use
of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color
reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white
in print
• If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at
http://support.elsevier.com.
Use of the Digital
Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists
of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication.
The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they
have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from
a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL
hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One
set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper
proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now
provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available
free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files will accompany the proofs (also given online).
The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If
you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them
to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections
and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail,
or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures.
Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor.
We will do everything possible to get your article published quickly and accurately – please let us have all your corrections within
48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying,
as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed
with the publication of your article if no response is received.
Offprints
The corresponding
author, at no cost, will be provided with a PDF file of the article via e-mail or, alternatively, 20 free paper offprints. The PDF file
is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining
the terms and conditions of use. Additional paper offprints can be ordered by the authors. An order form with prices will be sent to
the corresponding author.
For inquiries relating to the submission of articles
(including electronic submission) please visit this journal's homepage. Contact details for questions arising after acceptance of an
article, especially those relating to proofs, will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle.
You can also check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
