Guide for Authors
See also Elsevier Linguistics programmehome
Important
Notice to all Authors -
click here
Authors are requested to submit their papers electronically by using the
Journal of English for Academic
Purposes online submission and review web site (
http://ees.elsevier.com/jeap). This site will guide authors stepwise
through the submission process. Authors are requested to submit the text, tables, and artwork in electronic form to this address. Authors
who are unable to provide an electronic version or have other circumstances that prevent online submission must contact the Editors prior
to submission to discuss alternative options; email:
lizhl@hkucc.hku.hk or:
k.hyland@ioe.ac.uk.
Special
Issues
Journal of English for Academic Purposes welcomes proposals for special issues (which should be sent to
one of the Editors), which the Editors intend to publish on an occasional basis. Special issues should have a clear and coherent focus
and address topics which, in the opinion of the Editors, will be of considerable interest to
Journal of English for Academic Purposes
readers. Papers for special issues should meet the same standards as those published in regular issues and will be externally reviewed
in the same way. The journal Editors will be the final arbiters concerning their acceptance for publication.
Ethics in Publishing
For information
on Ethics in Publishing and Ethical guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All
authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships
with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived
to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except
in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without
the written consent of the copyright-holder.
Copyright
Upon acceptance
of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright see
http://www.elsevier.com/copyright).
Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding
author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this
agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation
within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other
derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions). If excerpts
from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s)
in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the
funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation
of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation
of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such
involvement then this should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose
articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://www.elsevier.com/languagepolishing or our customer support site at
http://epsupport.elsevier.com
for more information. Please note Elsevier neither endorses nor takes responsibility for any products, goods or services offered by outside
vendors through our services or in any advertising. For more information please refer to our Terms & Conditions:
http://www.elsevier.com/termsandconditions.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through
the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is
used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the
review process, these source files are needed for further processing after acceptance. All correspondence, including notification of
the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Additional Information
Article
submissions should not normally exceed
7,500 words excluding tables. Please double-space your manuscript and include wide margins.
Please look at a recent issue of
Journal of English for Academic Purposes to identify the usual structure of articles. A free
sample copy of the journal is available at:
www.elsevier.com/locate/jeap.
Review Policy
As JEAP has adopted a double blind reviewing policy,
please remove all identifying features from
the paper itself by ensuring that no author's name appears in the main text, in-text citations, reference list, or any running header.
Papers that have not had all such features removed will be returned without review to the author for alteration.
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor
used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed
and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words.
However, do use bold face, italics, subscripts, superscripts etc. Do not embed "graphically designed" equations or tables, but prepare
these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual
table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared
in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication).
Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on
the manuscript. See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the
"spell-check" and "grammar-check" functions of your wordprocessor.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given
separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval
systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name
may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work
was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in
front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available,
the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at
all stages of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers (with country and area code)
are provided in addition to the e-mail address and the complete postal address.
•
Present/permanent address.
If an author has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent
address") may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained
as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise abstract is required (maximum length
200 words) stating the purpose of the research, the principal
results and major conclusions. An abstract is often read separately from the article, so it must be able to stand alone.
Keywords
Immediately after the abstract, please provide a maximum of
6 keywords, avoiding general
or plural terms and multiple concepts (avoid, for example, "and", "of"). Only abbreviations firmly established in the field may be eligible
(EAP is an accepted abbreviation). These keywords will be used for indexing purposes. As far as possible, keywords should conform to
those used in LLBA (
Linguistics and Language Behaviour Abstracts).
Vitae
Vitae. Include a short (
maximum 50 words) biography of each author.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations
that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of
abbreviations throughout the article.
Acknowledgements
Collate acknowledgements
in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote
to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing
assistance or proof reading the article, etc.).
Footnotes
Footnotes should
be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes
into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present
the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure
you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according
to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations
separately.
• Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You
are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of
the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications
please supply "as is".
Please do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation)
document;
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
•
Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office
files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure,
at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed version.
For color reproduction in print, you will receive information
regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on
the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version
should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached
to the figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep
text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the
table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that
the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference
cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full.
Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these
references are included in the reference list they should follow the standard reference style of the journal and should include a substitution
of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that
the item has been accepted for publication.
Web references
As a minimum,
the full URL should be given. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.),
should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired,
or can be included in the reference list.
References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles
in the same Special Issue.
Reference style
Text: Citations
in the text should follow the referencing style used by the American Psychological Association. You are referred to the Publication Manual
of the American Psychological Association, Sixth Edition, ISBN 1-4388-0559-6, copies of which may be ordered from
http://books.apa.org/books.cfm?id=4200067
or APA Order Dept., P.O.B. 2710, Hyattsville, MD 20784, USA or APA, 3 Henrietta Street, London, WC3E 8LU, UK. Details concerning this
referencing style can also be found at
http://humanities.byu.edu/linguistics/Henrichsen/APA/APA01.html.
List:
references should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from
the same author(s) in the same year must be identified by the letters "a", "b", "c", etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J. A. J., & Lupton R. A. (2000). The art of writing a scientific
article.
Journal of Scientific Communications, 163, 51-59.
Reference to a book:
Strunk, W., Jr., & White,
E. B. (1979).
The elements of style. (3rd ed.). New York: Macmillan, (Chapter 4).
Reference to a chapter in an edited book:
Mettam, G. R., & Adams, L. B. (1994). How to prepare an electronic version of your article. In B. S. Jones, & R. Z. Smith
(Eds.),
Introduction to the electronic age (pp. 281-304). New York: E-Publishing Inc.
Supplementary material
Elsevier accepts electronic supplementary material to support and enhance your scientific research.
Supplementary files offer the author additional possibilities to publish supporting applications, movies, animation sequences, high-resolution
images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version
of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that
your submitted material is directly usable, please ensure that data are provided in one of our recommended file formats. Authors should
submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. Video
files: please supply 'stills' with your files: you can choose any frame from the video or make a separate image. These will be used instead
of standard icons and will personalize the link to your supplementary information. For more detailed instructions please visit our artwork
instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission
checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's
Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are
present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone
and fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including
title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
•
References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text,
and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
•
Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced
in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white
versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site
at
http://epsupport.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to
electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon
the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly
'Articles in press' because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown
as follows (example taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When
you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail.
The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer
outlining the terms and conditions of use. Additional paper offprints can be ordered by the authors. An order form with prices will be
sent to the corresponding author.
Additional Information
Author Benefit
Fast Electronic Publication Once the article has been proofed, it will be published immediately on the journal's 'Articles
in Press' section online, thus making it available to subscribers to read and cite. For more information, visit:
http://www.sciencedirect.com/science/journal/14751585.
Discount
Authors are entitled to a 30% discount on Elsevier books (excluding major reference works).
For inquiries relating to the submission of articles (including electronic submission
where available) please visit this journal's homepage. You can track accepted articles at
http://www.elsevier.com/trackarticle
and set up e-mail alerts to inform you of when an article's status has changed. Also accessible from here is information on copyright,
frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating
to proofs, will be provided by the publisher.
Home | Elsevier Sites | Privacy Policy | Terms and Conditions | Feedback | Site Map | A Reed Elsevier Company