Guide for Authors
Submission Fee
Each
submission must be accompanied by a submission fee of US$ 100.00. Submissions will only be considered after payment of the submission
fee via
SubmissionStart. Submission fee is non-refundable
and a paper may be rejected by the Editors without being sent for review, should a paper be inconsistent with the Aims and Scope of the
Journal as set out on the Journal website, lack originality or not adhere to the style requirements as outlined in the Guide for Authors.
The submission fees are used to support journal related activities.
Ethics in publishing
For information on Ethics in publishing and Ethical guidelines for journal publication
see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Changes to authorship
This
policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the
accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must
be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should
be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree
with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author
being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding
author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such
requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After
the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published
in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon
acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright
see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information.
An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement'
form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles
including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the funding source
You
are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly
describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing
of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this
should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and
policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals
published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To
learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This journal offers you the option of making your article freely available to all via the ScienceDirect
platform. To prevent any conflict of interest, you can only make this choice after receiving notification that your article has been
accepted for publication. The fee of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions
and funding bodies have entered into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements
are available at
http://www.elsevier.com/fundingbodies. Authors of accepted articles, who wish to take advantage of this
option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf). Whatever
access option you choose, you retain many rights as an author, including the right to post a revised personal version of your article
on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language
and language services
Please write your text in good English (American or British usage is accepted, but not a mixture
of these). Authors who require information about language editing and copyediting services pre- and post-submission please visit
http://webshop.elsevier.com/languageservices or our customer support
site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally online and
you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single
PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted
to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence,
including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submit your article
Please submit your article via
http://ees.elsevier.com/iref/
Use of wordprocessing software
It is important that the file be
saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple
as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's
options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. When preparing tables,
if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs,
not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also
the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Note that source files of figures, tables
and text graphics will be required whether or not you embed your figures in the text. See also the section on Electronic artwork.
To
avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your wordprocessor.
LaTeX
If the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should
preferably be written using Elsevier's document class 'elsarticle', or alternatively any of the other recognized classes and formats
supported in Elsevier's electronic submissions system, for further information see
http://www.elsevier.com/wps/find/authorsview.authors/latex-ees-supported.
The Elsevier 'elsarticle' LaTeX style file package (including detailed instructions for LaTeX preparation) can be obtained from the
Quickguide:
http://www.elsevier.com/latex. It consists of the file: elsarticle.cls, complete user documentation for the
class file, bibliographic style files in various styles, and template files for a quick start.
Article
structure
Essential title page information
•
Title.
Concise and informative.
Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
•
Author names
and affiliations.
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors'
affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter
immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including
the country name and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate
who will handle correspondence at all stages of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers
(with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be
kept up to date by the corresponding author.
•
Present/permanent address.
If an author has moved since the
work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as
a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address.
Superscript Arabic numerals are used for such footnotes.
Abstract
An abstract of not more
than 100 words should be provided.
Keywords
Immediately after the abstract, provide a maximum
of 5 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of").
Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing
purposes.
Classification codes
Provide at least one classification code according to the
Classification System for Journal Articles as used by the Journal of Economic Literature.
Acknowledgements
Acknowledgements
and information on grants received can be given before the references, in a separate section, and not as a footnote on the title page.
Math formulae
Displayed formulae should be numbered consecutively throughout the manuscript as (1), (2), etc.
against the right-hand margin of the page. In cases where the derivation of formulae has been abbreviated, it is of great help to the
referees if the full derivation can be presented on a separate sheet (not to be published).
Footnotes
Footnotes
should be kept to a minimum and numbered consecutively throughout the text with superscript Arabic numerals. They should be double-spaced
and not include displayed formulae or tables.
Artwork
Electronic artwork
General
points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations
as 'graphics' or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
•
Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
•
Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel)
then please supply 'as is'.
Please do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT,
WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately
large for the content.
Color artwork
Please make sure that artwork files are in an acceptable
format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color
figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and
other sites) regardless of whether or not these illustrations are reproduced in color in the printed version.
For color reproduction
in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate
your preference for color: in print or on the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting
color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black
and white versions of all the color illustrations.
Figure captions
Ensure that each illustration
has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (
not on the figure
itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations
used.
Tables
Tables should be numbered consecutively in the text in Arabic numerals.
References
Citation in text
Please ensure that every reference cited in the
text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished
results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references
are included in the reference list they should follow the standard reference style of the journal and should include a substitution of
the publication date with either 'Unpublished results' or 'Personal communication'. Citation of a reference as 'in press' implies that
the item has been accepted for publication.
References in a special issue
Please ensure
that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special
Issue.
Reference style
References to publications should be as follows: 'Smith (1992) reported
that...' or 'This problem has been studied previously (e.g., Smith et al., 1969)'. The author should make sure that there is a strict
one-to-one correspondence between the names and years in the text and those on the list. The list of references should appear at the
end of the main text (after any appendices, but before tables and legends for figures). It should be double-spaced and listed in alphabetical
order by author's name. References should appear as follows (for other examples, consult the Publication manual of the American Psychological
Association, 4th Ed., 1994): For monographs Hawawini, G., & Swary, I (1990), Mergers and acquisitions in the U.S. banking industry:
Evidence from the capital markets. Amsterdam: North-Holland. For contributions to the collective works Brunner, K., & Meltzer, A.H.
(1990). Money supply. In: B.M. Fiedman & F. H. Hahn (Eds.), Handbook of monetary economics, Vol. 1 (pp. 357-396). Amsterdam: North-Holland.
For periodicalsGriffiths, W., & Judge, G. (1992). Testing and estimating location vectors when the error covariance matrix is unknown,
Journal of Econometrics 54, 121-128. Note that journal titles should not be abbreviated. Unpublished results and personal communications
are not recommended in the reference list, but they may be mentioned in the text. If these references are included in the reference list
they should follow the standard reference style of the journal and should include a substitution of the publication date with either
'unpublished results' or 'Personal communications'. Citation of a reference as 'in press' implies that the item has been accepted for
publication.
Reference style
Text: Citations in the text should follow the referencing
style used by the American Psychological Association. You are referred to the Publication Manual of the American Psychological Association,
Sixth Edition, ISBN 978-1-4338-0561-5, copies of which may be ordered from
http://books.apa.org/books.cfm?id=4200067 or
APA Order Dept., P.O.B. 2710, Hyattsville, MD 20784, USA or APA, 3 Henrietta Street, London, WC3E 8LU, UK. Details concerning this referencing
style can also be found at
http://linguistics.byu.edu/faculty/henrichsenl/apa/apa01.html.
List: references should
be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s)
in the same year must be identified by the letters 'a', 'b', 'c', etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J. A. J., & Lupton, R. A. (2010). The art of writing a scientific
article.
Journal of Scientific Communications, 163, 51–59.
Reference to a book:
Strunk, W., Jr., &
White, E. B. (2000).
The elements of style. (4th ed.). New York: Longman, (Chapter 4).
Reference to a chapter in an edited
book:
Mettam, G. R., & Adams, L. B. (2009). How to prepare an electronic version of your article. In B. S. Jones, & R. Z.
Smith (Eds.),
Introduction to the electronic age (pp. 281–304). New York: E-Publishing Inc.
Supplementary
data
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary
files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound
clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web
products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly
usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together
with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork
instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
The
following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this
Guide for Authors for further details of any item.
Ensure that the following items are present:
One author has been designated
as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax
numbers
All necessary files have been uploaded, and contain:
• Keywords
• All figure captions
• All tables
(including title, description, footnotes)
Further considerations
• Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited
in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the
Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print, or
to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required,
black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer
support site at
http://support.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier
(DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned
to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium
for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The
correct format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do
not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download
the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe
Reader version 7 (or higher) available free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files
will accompany the proofs (also given online). The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return
them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark
the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the
pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text,
tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission
from the Editor. We will do everything possible to get your article published quickly and accurately – please let us have all your
corrections within 48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully
before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that
Elsevier may proceed with the publication of your article if no response is received.
Offprints
The
corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can
be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version
of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions
of use.
For inquiries relating to the submission of articles (including
electronic submission) please visit this journal's homepage. Contact details for questions arising after acceptance of an article, especially
those relating to proofs, will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle.
You can also check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
