Guide for Authors
Safety
Science serves as an international medium for research in the science and technology of human safety. It extends from safety of people
at work to other spheres, such as transport, leisure and home, as well as every other field of man's hazardous activities.
Safety
Science is multidisciplinary. Its contributors and its audience range from psychologists to chemical engineers. The journal covers the
physics and engineering of safety; its social, policy and organisational aspects; the management of risks; the effectiveness of control
techniques for safety; standardization, legislation, inspection, insurance, costing aspects, human behaviour and safety and the like.
Safety Science will enable academic researchers, engineers and decision makers in companies, government agencies and international
bodies, to augment their information level on the latest trends in the field, from policy makers and management scientists to transport
engineers.
The journal focuses primarily on original research papers across its whole scope, but also welcomes state-of-the-art review
papers and first hand case histories on accidents and disasters of special significance. The emphasis is on safety risks, as distinct
from health risks, but may include both.
The editors would like to draw the attention of potential authors to a paper by Shannon,
Robson & Guastello,
"Methodological criteria for evaluating
occupational safety intervention" [Safety Science, Volume 31, Issue 2, March 1999, Pages 161-179]. This gives some very
useful indications of the sort of criteria which the journal uses to judge papers presented for publication. The paper is partly based
on the experiences of reviewers in the past, and the shortcomings they have found in manuscripts sent to them for assessment. We hope
that you find the paper useful in planning research and in writing it up in a suitable form for publication.
Because of Safety Science's
international character, jargon should be avoided and terms rigorously defined. Contributors should take particular care to define all
terms used in statistical analyses and, where relevant, apprise readers of their country's legislative background to their subject. This
applies particularly to the use of the term accident, the reportability of which differs from country to country.
Types
of Paper
Research Paper; Paper with newly collected or analysed data, experimental or survey results, or a proposed
new theory or model supported by analysis and arguments.
Review Paper; Paper with a comprehensive review of the literature
on a specified topic, which updates previously published reviews, or proposes new interpretations of the current state of the art on
the topic.
Technical Communication; Description of a new measuring instrument, analysis technique, policy, regulation or
other new development in the field of safety science, which is limited to a description and does not contain evaluation or detailed analysis
of its background or development (publications in this category are sent only to one reviewer and have a lower status than full papers).
Case Study of accident or incident; Description and analysis of a single accident or incident, or a small number of these, providing
some depth of understanding about causes and/or consequences.
Letter to the Editor; Letter raising issues for debate in the
area of safety science.
Book Review; Review of a recently published book, report or monograph (available for purchase or
downloading), either solicited by the editor, or offered by a reviewer.
Ethics in publishing
For information on Ethics in publishing and Ethical guidelines for journal publication
see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Changes to authorship
This
policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the
accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must
be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should
be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree
with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author
being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding
author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such
requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After
the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published
in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon
acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright
see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information.
An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement'
form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles
including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the funding source
You
are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly
describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing
of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this
should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and
policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals
published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To
learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This journal offers you the option of making your article freely available to all via the ScienceDirect
platform. To prevent any conflict of interest, you can only make this choice after receiving notification that your article has been
accepted for publication. The fee of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions
and funding bodies have entered into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements
are available at
http://www.elsevier.com/fundingbodies. Authors of accepted articles, who wish to take advantage of this
option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf). Whatever
access option you choose, you retain many rights as an author, including the right to post a revised personal version of your article
on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language
and language services
Please write your text in good English (American or British usage is accepted, but not a mixture
of these). Authors who require information about language editing and copyediting services pre- and post-submission please visit
http://webshop.elsevier.com/languageservices or our customer support
site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally online and
you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single
PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted
to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence,
including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submission Site for Safety Science
To submit your paper please click here
http://ees.elsevier.com/safety/
Use of wordprocessing software
It is important that the file be
saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple
as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's
options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. When preparing tables,
if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs,
not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also
the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Note that source files of figures, tables
and text graphics will be required whether or not you embed your figures in the text. See also the section on Electronic artwork.
To
avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your wordprocessor.
Article structure
Subdivision - numbered sections
Divide your article into
clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included
in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be
given a brief heading. Each heading should appear on its own separate line.
Introduction
State
the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already published
should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A
Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation
for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.
Results
Results
should be clear and concise.
Discussion
This should explore the significance of the results
of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion
of published literature.
Conclusions
The main conclusions of the study may be presented
in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations
in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly
for tables and figures: Table A.1; Fig. A.1, etc.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae
where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name),
please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all
affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide
the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also
post-publication.
Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address
and the complete postal address. Contact details must be kept up to date by the corresponding author.
•
Present/permanent
address.
If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address'
(or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work
must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A
concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major
conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References
should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided,
but if essential they must be defined at their first mention in the abstract itself.
Graphical abstract
A
Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture the
attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical
abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum
of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 × 13 cm using a regular
screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. See
http://www.elsevier.com/graphicalabstracts
for examples.
Authors can make use of Elsevier's Illustration and Enhancement service to ensure the best presentation of their images
also in accordance with all technical requirements:
Illustration
Service.
Highlights
Highlights are mandatory for this journal. They consist
of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the
online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including
spaces, per bullet point). See
http://www.elsevier.com/highlights for examples.
Keywords
Immediately
after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts
(avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible.
These keywords will be used for indexing purposes.
Acknowledgements
Collate acknowledgements
in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote
to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing
assistance or proof reading the article, etc.).
Math formulae
Present simple formulae in
the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In
principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any
equations that have to be displayed separately from the text (if referred to explicitly in the text).
Footnotes
Footnotes
should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build
footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and
present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table
footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your
original artwork.
• Save text in illustrations as 'graphics' or enclose the font.
• Only use the following fonts in
your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
•
Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images
near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic
artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this
site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when
your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats (note the resolution requirements
for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text
as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings:
use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
If
your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is'.
Please
do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low;
•
Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files)
and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure,
at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed version.
For color reproduction in print, you will receive information
regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or
on the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version
should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the
figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep text in
the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number
tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them
with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables
do not duplicate results described elsewhere in the article.
References
Citation
in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any
references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference
list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference
style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'.
Citation of a reference as 'in press' implies that the item has been accepted for publication.
Web references
As
a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author
names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the
reference list) under a different heading if desired, or can be included in the reference list.
Reference
management software
This journal has standard templates available in key reference management packages EndNote (
http://www.endnote.com/support/enstyles.asp)
and Reference Manager (
http://refman.com/support/rmstyles.asp). Using plug-ins to wordprocessing packages, authors only
need to select the appropriate journal template when preparing their article and the list of references and citations to these will be
formatted according to the journal style which is described below.
Reference Style
Text:
All citations in the text should refer to:
1. Single author: the author's name (without initials, unless there is ambiguity) and
the year of publication;
2. Two authors: both authors' names and the year of publication;
3. Three or more authors: first author's
name followed by 'et al.' and the year of publication. Citations may be made directly (or parenthetically). Groups of references should
be listed first alphabetically, then chronologically.
List: References should be arranged first alphabetically and then
further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the
letters "a", "b", "c", etc., placed after the year of publication.
Examples:
Chhokar, J.S., Wallin, J.A., 1984. Improving
safety through applied behavior analysis. Journal of Safety Research 15, 141-151.
Cook, T.D., Campbell, D.T., Peracchio L., 1990.
Quasi experimentation. In: Dunnette, J.D., Hough, L.M. (Eds.), Handbook of Industrial and Organizational Psychology, pp. 491-576. Consulting
Psychologists Press, Palo Alto, CA.
Hale A.R., Hovden J., 1998. Management and culture: the third age of safety. A review of approaches
to organizational aspects of safety health and environment. In: Williamson, A., Feyer, A.-M. (Eds.), Occupational Injury: Risk, Prevention
and Injury. Taylor & Francis.
Harborview Medical Center Injury Prevention and Research Center, 1997. Systematic Reviews of Childhood
Injury Prevention Interventions.
http://weber.u.washington.edu/_hiprc/index_left.html (Oct. 22, 1997).
Lipsey, M.W.,
1990. Design Sensitivity. Sage Publications, Newbury Park, CA.
Journal abbreviations source
Journal
names should be abbreviated according to
Index Medicus journal abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Video data
Elsevier accepts video material and
animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit
with their article are strongly encouraged to include these within the body of the article. This can be done in the same way as a figure
or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should
be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material
is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size of 50 MB. Video and
animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation
or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed
instructions please visit our video instruction pages at
http://www.elsevier.com/artworkinstructions. Note: since video
and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version
for the portions of the article that refer to this content.
Supplementary data
Elsevier
accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional
possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files
supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data
in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply
a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
The following list will be useful during the final checking of an article prior to sending
it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following
items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded, and contain:
•
Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
•
Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
•
All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use
of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color
reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white
in print
• If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at
http://support.elsevier.com.
Use of the Digital
Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists
of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication.
The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they
have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from
a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL
hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One
set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper
proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now
provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available
free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files will accompany the proofs (also given online).
The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If
you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them
to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections
and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail,
or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures.
Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor.
We will do everything possible to get your article published quickly and accurately – please let us have all your corrections within
48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying,
as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed
with the publication of your article if no response is received.
Offprints
The corresponding
author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via
the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published
article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
For inquiries relating to the submission of articles (including electronic submission) please
visit this journal's homepage. Contact details for questions arising after acceptance of an article, especially those relating to proofs,
will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle. You can also
check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
