Guide for Authors
The
Journal
of Pure and Applied Algebra concentrates on that part of algebra likely to be of general mathematical interest: algebraic results
with immediate applications, and the development of algebraic theories of sufficiently general relevance to allow for future applications.
Contact Details for Submission
Articles must be written in good English and may be submitted (in duplicate)
to any of the journal¿s editors. It is essential to give an e-mail address when submitting a manuscript.
Ethics in publishing
For information on Ethics in publishing and Ethical guidelines
for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Contributors
Each author
is required to declare his or her individual contribution to the article: all authors must have materially participated in the research
and/or article preparation, so roles for all authors should be described. The statement that all authors have approved the final article
should be true and included in the disclosure.
Changes to authorship
This policy concerns
the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the accepted manuscript
is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal
Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added or removed,
or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the addition,
removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed.
Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must
follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests and (2)
publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After the accepted manuscript
is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue
will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon
acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright
see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information.
An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement'
form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles
including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Language and language services
Please
write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who require information
about language editing and copyediting services pre- and post-submission please visit
http://webshop.elsevier.com/languageservices or our customer support site at
http://support.elsevier.com for more information.
Submission
Manuscripts
may be submitted to
jpaa@math.rutgers.edu or directly to any journal editor. It is the author's responsibility to submit
articles written in acceptable and grammatically correct English (or French or German). Information to a link of a professional service
that helps with copy editing is available upon request to the Editors-in-Chief. Electronic submission of a PDF file is preferred.
LaTeX
If the LaTeX file is suitable, proofs will be produced without
rekeying the text. The article should preferably be written using Elsevier's document class "elsart", or alternatively the standard document
class "article". The Elsevier LaTeX package (including detailed instructions for LaTeX preparation) can be obtained from the Quickguide:
http://www.elsevier.com/latex. It consists of the files: elsart.cls, guidelines for users of elsart, a template file for
quick start, and the instruction booklet "Preparing articles with LaTeX".
Article structure
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature
survey or a summary of the results.
Material and methods
Provide sufficient detail to allow
the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt
with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development
from a theoretical basis.
Results
Results should be clear and concise.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand
alone or form a subsection of a Discussion or Results and Discussion section.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae
where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name),
please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all
affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide
the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also
post-publication.
Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address
and the complete postal address. Contact details must be kept up to date by the corresponding author.
•
Present/permanent
address.
If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address'
(or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work
must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A
concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major
conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References
should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided,
but if essential they must be defined at their first mention in the abstract itself.
Highlights
Highlights
are a short collection of bullet points that convey the core findings of the article. Highlights are optional and should be submitted
in a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum
85 characters, including spaces, per bullet point). See
http://www.elsevier.com/highlights for examples.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding
general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly
established in the field may be eligible. These keywords will be used for indexing purposes.
Classification
Codes
Please provide classification codes as per the standard AMS codes. A full list and information for these can be found
at
http://www.ams.org/msc.
Abbreviations
Define abbreviations that are not
standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract
must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references
and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided
help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Math
formulae
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal
line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently
denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the
text).
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout
the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should
this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the
article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript
lowercase letter.
Artwork
Electronic artwork
General
points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations
as 'graphics' or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
•
Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
•
Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel)
then please supply 'as is'.
Please do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT,
WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately
large for the content.
Figure captions
Ensure that each illustration has a caption. Supply
captions separately, not attached to the figure. A caption should comprise a brief title (
not on the figure itself) and a description
of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Text graphics
Text graphics may be embedded in the text at the appropriate position. If you are working with
LaTeX and have such features embedded in the text, these can be left. Further, high-resolution graphics files must be provided separately
whether or not the graphics are embedded. See further under Electronic artwork.
Tables
Number
tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them
with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables
do not duplicate results described elsewhere in the article.
References
Citation
in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any
references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference
list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference
style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'.
Citation of a reference as 'in press' implies that the item has been accepted for publication.
Web references
As
a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author
names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the
reference list) under a different heading if desired, or can be included in the reference list.
References
in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations
in the text) to other articles in the same Special Issue.
Reference management software
This
journal has standard templates available in key reference management packages EndNote (
http://www.endnote.com/support/enstyles.asp)
and Reference Manager (
http://refman.com/support/rmstyles.asp). Using plug-ins to wordprocessing packages, authors only
need to select the appropriate journal template when preparing their article and the list of references and citations to these will be
formatted according to the journal style which is described below.
Reference style
Text:
Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s)
must always be given.
Example: '..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ....'
List:
The list of references is arranged alphabetically and then numbered (numbers in square brackets).
Examples:
Reference
to a journal publication:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun.
163 (2010) 51–59.
Reference to a book:
[2] W. Strunk Jr., E.B. White, The Elements of Style, fourth ed., Longman, New York,
2000.
Reference to a chapter in an edited book:
[3] G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article,
in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 2009, pp. 281–304.
Video data
Elsevier accepts video material and animation sequences to support and enhance your scientific
research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include these
within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content
and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to
the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one
of our recommended file formats with a preferred maximum size of 50 MB. Video and animation files supplied will be published online in
the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com.
Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be
used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video
instruction pages at
http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in
the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that
refer to this content.
Supplementary data
Elsevier accepts electronic supplementary material
to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting
applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online
alongside the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com.
In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors
should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file.
For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
The following list will be useful during the final checking of an article prior to sending
it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following
items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded, and contain:
•
Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
•
Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
•
All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use
of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color
reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white
in print
• If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at
http://support.elsevier.com.
Use of the Digital
Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists
of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication.
The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they
have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from
a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL
hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One
set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper
proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now
provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available
free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files will accompany the proofs (also given online).
The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If
you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them
to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections
and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail,
or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures.
Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor.
We will do everything possible to get your article published quickly and accurately – please let us have all your corrections within
48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying,
as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed
with the publication of your article if no response is received.
Offprints
The corresponding
author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via
the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published
article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
For inquiries relating to the submission of articles (including electronic submission) please
visit this journal's homepage. Contact details for questions arising after acceptance of an article, especially those relating to proofs,
will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle. You can also
check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
