Guide for Authors
Ethics in publishing
For information on Ethics in publishing
and Ethical guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration and verification
Submission of an article implies that the work described has not been
published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration
for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where
the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language,
including electronically without the written consent of the copyright-holder. To verify originality, your article may be checked by the
originality detection software iThenticate. See also
http://www.elsevier.com/editors/plagdetect.
Contributors
Each
author is required to declare his or her individual contribution to the article: all authors must have materially participated in the
research and/or article preparation, so roles for all authors should be described. The statement that all authors have approved the final
article should be true and included in the disclosure.
Changes to authorship
This policy
concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the accepted
manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent
to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added
or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the
addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added
or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author,
who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests
and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After the accepted
manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an
online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon
acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright
see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information.
An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement'
form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles
including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the funding source
You
are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly
describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing
of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this
should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and
policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals
published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To
learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This journal offers you the option of making your article freely available to all via the ScienceDirect
platform. To prevent any conflict of interest, you can only make this choice after receiving notification that your article has been
accepted for publication. The fee of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions
and funding bodies have entered into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements
are available at
http://www.elsevier.com/fundingbodies. Authors of accepted articles, who wish to take advantage of this
option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf). Whatever
access option you choose, you retain many rights as an author, including the right to post a revised personal version of your article
on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language
and language services
Manuscripts should be written in English (American or British usage is accepted, but not a mixture
of these). Authors who are unsure of correct English usage should have their manuscript checked by someone proficient in the language.
Manuscripts in which the English is difficult to understand may be returned to the author for revision before scientific review.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through the
creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used
in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review
process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's
decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submission:
Special Issues
In the case of Special Issues, manuscripts should be submitted also through the online Submission System
to the Guest Editor(s). Authors should ensure that they submit manuscripts and meet any additional requirements in line with deadlines
set by the Guest Editor(s) to ensure that the entire Special Issue can be published in a timely fashion.
Referees
Please
submit, with the manuscript, the names, addresses and e-mail addresses of 4 potential referees. Note that the editor retains the sole
right to decide whether or not the suggested reviewers are used.
Additional information
Journal
of Hydrology has no page charges.
Use of wordprocessing software
Manuscripts
should be prepared with numbered lines, with wide margins and double spacing throughout, i.e. also for abstracts and references. Every
page of the manuscript, including the title page, references, tables, etc. should be numbered. Avoid excessive use of italics to emphasize
part of the text.
It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column
format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article.
In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts,
superscripts etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When
preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid
is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional
manuscripts (see also the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Do not import the
figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript.
See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and
"grammar-check" functions of your wordprocessor.
Article structure
Subdivision
- numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1
(then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing:
do not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature
survey or a summary of the results.
Material and methods
Provide sufficient detail to allow
the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt
with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development
from a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results
and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion
or Results and Discussion section.
Appendices
If there is more than one appendix, they should
be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a
subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
Essential
title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval
systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name
may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work
was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in
front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available,
the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at
all stages of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers (with country and area code)
are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date by the corresponding
author.
•
Present/permanent address.
If an author has moved since the work described in the article was done,
or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address
at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for
such footnotes.
Abstract
A concise and factual abstract is required. The abstract should
state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from
the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s)
and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention
in the abstract itself.
Graphical abstract
A Graphical abstract is optional and should summarize
the contents of the article in a concise, pictorial form designed to capture the attention of a wide readership online. Authors must
provide images that clearly represent the work described in the article. Graphical abstracts should be submitted as a separate file in
the online submission system. Image size: Please provide an image with a minimum of 531 × 1328 pixels (h × w) or proportionally
more. The image should be readable at a size of 5 × 13 cm using a regular screen resolution of 96 dpi. Preferred file types: TIFF,
EPS, PDF or MS Office files. See
http://www.elsevier.com/graphicalabstracts for examples.
Authors can make use of Elsevier's
Illustration and Enhancement service to ensure the best presentation of their images also in accordance with all technical requirements:
Illustration Service.
Highlights
Highlights are mandatory for this journal. They consist of a short collection of bullet points
that convey the core findings of the article and should be submitted in a separate file in the online submission system. Please use 'Highlights'
in the file name and include 3 to 5 bullet points (maximum 85 characters including spaces per bullet point). See
http://www.elsevier.com/highlights
for examples.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords,
using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with
abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first
page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as
in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate
acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title
page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language
help, writing assistance or proof reading the article, etc.).
Artwork
Electronic
artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
•
Save text in illustrations as 'graphics' or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier,
Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention
for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of
the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our
website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the
detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is
finalised, please 'save as' or convert the images to one of the following formats (note the resolution requirements for line drawings,
halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as 'graphics'.
TIFF:
Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000
dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
If your electronic artwork
is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is'.
Please do not:
•
Supply files that are optimised for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are
too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color
artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct
resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge,
that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations
are reproduced in color in the printed version.
For color reproduction in print, you will receive information regarding the costs
from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or on the Web only. For
further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please
note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version should
you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the
figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep text in
the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Text graphics
Text
graphics may be embedded in the text at the appropriate position. If you are working with LaTeX and have such features embedded in the
text, these can be left. Further, high-resolution graphics files must be provided separately whether or not the graphics are embedded.
See further under Electronic artwork.
Tables
Number tables consecutively in accordance with
their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid
vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere
in the article.
References
Responsibility for the accuracy of bibliographic citations lies
entirely with the authors.
Citation in text
Please ensure that every reference cited in
the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished
results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references
are included in the reference list they should follow the standard reference style of the journal and should include a substitution of
the publication date with either "Unpublished results" or "Personal communication". Citation of a reference as "in press" implies that
the item has been accepted for publication.
Web references
As a minimum, the full URL should
be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to
a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different
heading if desired, or can be included in the reference list.
References in a special issue
Please
ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same
Special Issue.
Reference management software
This journal has standard templates available
in key reference management packages EndNote (
http://www.endnote.com/support/enstyles.asp) and Reference Manager (
http://refman.com/support/rmstyles.asp).
Using plug-ins to wordprocessing packages, authors only need to select the appropriate journal template when preparing their article
and the list of references and citations to these will be formatted according to the journal style which is described below.
Reference Style
Text: All citations in the text should refer to:
1.
Single author: the
author's name (without initials, unless there is ambiguity) and the year of publication;
2.
Two authors: both authors' names
and the year of publication;
3.
Three or more authors: first author's name followed by "et al." and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed first alphabetically, then chronologically.
For Notes containing more than one citation, references should be seperated by a semi-colon.
Examples: "as demonstrated (Allan, 1996a,
1996b, 1999; Allan and Jones, 1995). Kramer et al. (2000) have recently shown ...."
List: References should be arranged
first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same
year must be identified by the letters "a", "b", "c", etc., placed after the year of publication.
Examples:
Reference
to a journal publication:
Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2000. The art of writing a scientific article. J. Sci.
Commun. 163, 51–59.
Reference to a book:
Strunk Jr., W., White, E.B., 1979. The Elements of Style, third ed. Macmillan,
New York.
Reference to a chapter in an edited book:
Mettam, G.R., Adams, L.B., 1999. How to prepare an electronic version of
your article, in: Jones, B.S., Smith , R.Z. (Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281–304.
Journal abbreviations source
Journal names should be abbreviated according to
Index Medicus journal abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Video data
Elsevier
accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files
that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done
in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed.
All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your
video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum
size of 50 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web
products, including ScienceDirect:
http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose
any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the
link to your video data. For more detailed instructions please visit our video instruction pages at
http://www.elsevier.com/artworkinstructions.
Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and
the print version for the portions of the article that refer to this content.
Supplementary data
Elsevier
accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional
possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files
supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data
in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply
a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Data at PANGAEA
Electronic archiving of supplementary data enables readers to replicate, verify and build
upon the conclusions published in your paper. We recommend that data should be deposited in the data library PANGAEA (
http://www.pangaea.de).
Data are quality controlled and archived by an editor in standard machine-readable formats and are available via Open Access. After processing,
the author receives an identifier (DOI) linking to the supplements for checking. As your data sets will be citable you might want to
refer to them in your article. In any case, data supplements and the article will be automatically linked as in the following example:
doi:10.1016/0016-7037(95)00105-9. Please use PANGAEA's
web interface to submit your data (
http://www.pangaea.de/submit/).
Submission checklist
The
following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this
Guide for Authors for further details of any item.
Ensure that the following items are present:
One author has been designated
as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax
numbers
All necessary files have been uploaded, and contain:
• Keywords
• All figure captions
• All tables
(including title, description, footnotes)
Further considerations
• Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited
in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the
Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print, or
to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required,
black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer
support site at
http://support.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier
(DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned
to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium
for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The
correct format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do
not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download
the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe
Reader version 7 (or higher) available free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files
will accompany the proofs (also given online). The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return
them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark
the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the
pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text,
tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission
from the Editor. We will do everything possible to get your article published quickly and accurately – please let us have all your
corrections within 48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully
before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that
Elsevier may proceed with the publication of your article if no response is received.
Offprints
The
corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can
be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version
of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions
of use.
Author's Discount
Contributors to Elsevier journals are entitled to a 30% discount
on most Elsevier books, if ordered directly from Elsevier.
For inquiries
relating to the submission of articles (including electronic submission) please visit this journal's homepage. Contact details for questions
arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher. You can track accepted
articles at
http://www.elsevier.com/trackarticle. You can also check our Author FAQs (
http://www.elsevier.com/authorFAQ)
and/or contact Customer Support via
http://support.elsevier.com.
