Guide for Authors
Introduction
Conservation of energy requires an efficient combustion of fossil fuels, and the protection of the environment demands a limitation of
the pollutants emitted from combustion systems.
Progress in Energy and Combustion Science contains articles by internationally
recognized authors in the fields of combustion, flames, fuel science and technology and energy studies. Each volume contains a number
of specially commissioned review articles on a specific topic, which provides the reader with an orderly and concise survey of a particular
aspect of combustion and energy. The length of the articles allows authors to discuss their subjects more fully and comprehensively than
can be undertaken in papers reporting original work. These review articles provide an opportunity for research workers to become usefully
informed in fields other than their own. They are of use to students seeking a review of a particular subject, together with a comprehensive
bibliography. Certain volumes are also aimed at engineers working in government and industrial research establishments, seeking practical
solutions to problems in the fields of energy and pollution.
Types of Contributions
Full-length
review articles by internationally recognised authorities in the fields of combustion, flames, fuel science and technology, and energy
studies. The majority of articles are commissioned by the Editor; direct submissions may be considered but the Editor should be contacted
prior to submission.
Page charges
This journal has no page charges.
Ethics in publishing
For information on Ethics in publishing and Ethical guidelines
for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Changes to authorship
This
policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the
accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must
be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should
be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree
with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author
being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding
author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such
requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After
the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published
in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon
acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright
see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information.
An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement'
form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles
including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the funding source
You
are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly
describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing
of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this
should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and
policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals
published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To
learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://webshop.elsevier.com/languageservices
or our customer support site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally online and
you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single
PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted
to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence,
including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submission Address
Please submit your article via
http://ees.elsevier.com/pecs
Referees
Please submit, with the manuscript, the names, addresses and e-mail addresses of three potential
referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.
LaTeX
If the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should
preferably be written using Elsevier's document class 'elsarticle', or alternatively any of the other recognized classes and formats
supported in Elsevier's electronic submissions system, for further information see
http://www.elsevier.com/wps/find/authorsview.authors/latex-ees-supported.
The Elsevier 'elsarticle' LaTeX style file package (including detailed instructions for LaTeX preparation) can be obtained from the
Quickguide:
http://www.elsevier.com/latex. It consists of the file: elsarticle.cls, complete user documentation for the
class file, bibliographic style files in various styles, and template files for a quick start.
Article
structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered
sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering).
Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be given a brief heading.
Each heading should appear on its own separate line.
Introduction
State the objectives of
the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Theory/calculation
A
Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation
for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.
Conclusions
The
main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion
or Results and Discussion section.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly.
Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case
superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each
affiliation, including the country name and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication.
Ensure that telephone
and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact
details must be kept up to date by the corresponding author.
•
Present/permanent address.
If an author has
moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may
be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main,
affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A
concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major
conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References
should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided,
but if essential they must be defined at their first mention in the abstract itself.
Keywords
Immediately
after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts
(avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible.
These keywords will be used for indexing purposes.
Immediately after the abstract, provide a maximum of
6 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be
sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing
purposes.
Abbreviations
Define abbreviations that are not standard in this field in a footnote
to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first
mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate
acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title
page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language
help, writing assistance or proof reading the article, etc.).
Units
Follow internationally
accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent
in SI.
Math formulae
Present simple formulae in the line of normal text where possible and
use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in
italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately
from the text (if referred to explicitly in the text).
Footnotes
Footnotes should be used
sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into
the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes
themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate
each footnote in a table with a superscript lowercase letter.
Artwork
Electronic
artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
•
Save text in illustrations as 'graphics' or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier,
Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention
for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of
the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our
website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the
detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is
finalised, please 'save as' or convert the images to one of the following formats (note the resolution requirements for line drawings,
halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as 'graphics'.
TIFF:
Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000
dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
If your electronic artwork
is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is'.
Please do not:
•
Supply files that are optimised for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are
too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color
artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct
resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge,
that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations
are reproduced in color in the printed version.
For color reproduction in print, you will receive information regarding the costs
from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or on the Web only. For
further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please
note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version should
you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the
figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep text in
the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number
tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them
with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables
do not duplicate results described elsewhere in the article.
References
Citation
in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any
references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference
list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference
style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'.
Citation of a reference as 'in press' implies that the item has been accepted for publication.
References
in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations
in the text) to other articles in the same Special Issue.
Reference style
Text:
Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s)
must always be given.
List: Number the references (numbers in square brackets) in the list in the order in which they appear
in the text.
Examples:
Reference to a journal publication:
[1] Van der Geer J, Hanraads JAJ, Lupton RA. The art
of writing a scientific article. J Sci Commun 2010;163:51–9.
Reference to a book:
[2] Strunk Jr W, White EB. The elements
of style. 4th ed. New York: Longman; 2000.
Reference to a chapter in an edited book:
[3] Mettam GR, Adams LB. How to prepare
an electronic version of your article. In: Jones BS, Smith RZ, editors. Introduction to the electronic age, New York: E-Publishing Inc;
2009, p. 281–304.
Note shortened form for last page number. e.g., 51–9, and that for more than 6 authors the first 6
should be listed followed by 'et al.' For further details you are referred to 'Uniform Requirements for Manuscripts submitted to Biomedical
Journals' (J Am Med Assoc 1997;277:927–34) (see also
http://www.nlm.nih.gov/bsd/uniform_requirements.html).
Supplementary data
Elsevier accepts electronic supplementary material to support and enhance your scientific
research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background
datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article
in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted
material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic
format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit
our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission
checklist
The following list will be useful during the final checking of an article prior to sending it to the journal
for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal
address
• Telephone and fax numbers
All necessary files have been uploaded, and contain:
• Keywords
•
All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript
has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
• All references
mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted
material from other sources (including the Web)
• Color figures are clearly marked as being intended for color reproduction
on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white in print
•
If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further
information please visit our customer support site at
http://support.elsevier.com.
Use of the Digital Object Identifier
The
Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character
string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore,
it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic
information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters
B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, the DOIs are
guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by
e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will be provided
in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can be annotated;
for this you will need to download Adobe Reader version 7 (or higher) available free from
http://get.adobe.com/reader. Instructions
on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If you do not wish to use the PDF annotations function, you may
list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting
line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query
Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for checking
the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted
for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article
published quickly and accurately – please let us have all your corrections within 48 hours. It is important to ensure that all
corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections
cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article
if no response is received.
Offprints
The corresponding author, at no cost, will be provided
with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via the offprint order form which is sent
once the article is accepted for publication. The PDF file is a watermarked version of the published article and includes a cover sheet
with the journal cover image and a disclaimer outlining the terms and conditions of use.
For
inquiries relating to the submission of articles (including electronic submission) please visit this journal's homepage. Contact details
for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher. You can
track accepted articles at
http://www.elsevier.com/trackarticle. You can also check our Author FAQs (
http://www.elsevier.com/authorFAQ)
and/or contact Customer Support via
http://support.elsevier.com.
