It is a condition of publication that all manuscripts must be written in clear
and grammatically correct English and be submitted to the Reliability Engineering & System Safety electronic submission
site at
http://ees.elsevier.com/ress
Authors are requested to transmit the text and art of the manuscript in electronic
form to this address. Each manuscript must also be accompanied by a cover letter outlining the basic findings of the paper and their
significance.
Prior to submitting your paper, please follow the instructions given below. Please note that you must have an e-mail
address to use the online submission system. Authors submit their article online by simply registering, logging-in, and submitting.
The system automatically converts source files to a single Adobe Acrobat PDF version of the article, which is used in the peer-review
process. Please note that even though manuscript source files are converted to PDF at submission for the review process, these source
files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests
for revision, takes place by e-mail, removing the need for a hard-copy paper trail.
Detailed instructions on the use of the online
submission system are available at http://ees.elsevier.com/ress Please read the 'Hints' for information on how to register,
and review the 'Tutorial for Authors' for a run-through of the submission process. If you need any further help, please do not hesitate
to contact our Author Support Department: authorsupport@elsevier.com
Submission Language: English. Language
Polishing. Authors who require information about language editing and copyediting services pre- and post-submission please visit http://www.elsevier.com/locate/languagepolishing
or contact authorsupport@elsevier.com for more information. Please note Elsevier neither endorses nor takes responsibility
for any products, goods or services offered by outside vendors through our services or in any advertising. For more information please
refer to our Terms & Conditions: http://www.elsevier.com/termsandconditions
Types of contributions: Original
papers, review articles, case studies, short communications, reports and announcements of conferences and meetings, book reviews, letters
to the editors. The subject and content of review articles should first be discussed with the editors.
Corresponding author: Clearly indicate who is responsible for correspondence at all stages of refereeing and publication, including post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete
postal address. Full postal addresses must be given for all co-authors. Please consult a recent journal paper for style if possible.
Original material: Submission of an article implies that the work described has not been published previously (except
in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and that, if accepted, it will not be published elsewhere in the same form,
in English or in any other language, without the written consent of the copyright-holder.
Upon acceptance of an article, authors
will be asked to sign a 'Journal Publishing Agreement' (for more information on this and copyright see http://www.elsevier.com/copyright).
Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail (or letter) will be sent to the corresponding
author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this
agreement. Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation
within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other
derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions).
If excerpts
from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s)
in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Funding body agreements and policies Elsevier has established agreements and developed policies to allow authors
whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies
Authors' rights As an author you (or your employer or institution) retain certain rights; for details you are referred
to: http://www.elsevier.com/authorsrights.
Editor's requirements:
Generally the size of a manuscript should
not exceed about 30 printed pages. Authors should choose which editor they would like to handle their manuscript at the time of submission.
Authors may also suggest the names and e-mail addresses of up to three potential reviewers for their paper; please note that the choice
of reviewers remains at the Editors' discretion.
Detailed instructions on manuscript preparation and artwork instructions can
be found below. The editor reserves the right to return manuscripts that do not conform to the instructions for manuscript preparation
and artwork instruction, as well as paper that do not fit the scope of the journal, prior to refereeing.
General: Editors reserve the right to adjust style to certain standards of uniformity. Please use Word, Word Perfect or LaTeX files for
the text of your manuscript that you upload onto the submission site. (For further information about LaTeX submission, please go to
http://www.elsevier.com/latex.) Back to contents list
Structure: Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements,
Appendix, References, Vitae, Figure Captions and then Tables. Do not import figures into the text - see Illustrations. Collate acknowledgements
in a separate section at the end of the article and do not include them on the title page, as a footnote to the title or otherwise. Back
to the contents list
Text Layout: Use a single column format,
double spacing and wide margins, and avoid full justification. Ensure that each new paragraph is clearly indicated. Present tables and
figure legends on separate pages at the end of the manuscript. If possible, consult a recent issue of the journal to become familiar
with layout and conventions. Number all pages consecutively, use 12 or 10 pt font size and standard fonts. Back
to the contents list
Corresponding author: Clearly indicate
who is responsible for correspondence at all stages of refereeing and publication, including post-publication. Ensure that telephone
and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Full
postal addresses must be given for all co-authors. Please consult a recent journal paper for style if possible. Back
to the contents list
Abstract: A self-contained abstract
of about 100-200 words outlining in a single paragraph the aims, scope and conclusions of the paper must be supplied. Back
to the contents list
Keywords: Immediately after the abstract,
the author may provide some keywords (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established
in the field may be eligible.
Back to the contents list
Symbols: Notation should conform to that most frequently used in the engineering field concerned. Particular care should
be exercised in identifying all symbols and in avoiding ambiguities. Distinction should be made between the number one (1) and the letter
l, and between zero (0) and the letter O.
Units: The SI system should
be used for all scientific and laboratory data. If, in certain instances, it is necessary to quote other units, these should be added
in parentheses. Temperatures should be given in degrees Celsius. The unit 'billion' (109 in America, 1012 in Europe)
is ambiguous and must not be used. Back to the contents list
Maths: Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly
in the text).
References: All publications cited in the text should be
presented in a list of references following the text of the manuscript. In the text refer to references by a number in square brackets
on the line (e.g. Since Qamber [1]), and the full reference should be given in a numerical list at the end of the paper. References
should be given in the following form:
[1] Qamber IS. Flow graph development method. Microelectron Reliab 1993;33(9):1387?1395.
[2] Billinton R, Allan R. Reliability evaluation of engineering systems. Great Britain: Pitman Publishing, 1983.
[3] Miyata K,
Zama T, Yahagi K, Omoto A. Accident management for BWR in Japan. In: Proc 3rd Int Conf on Nucl Eng (ICONE-3). Kyoto, 1995. p. 1259-1264.
[4] Nagode M. Experiment design for operating strength. M.Sc. Thesis, University of Ljubljana, Ljubljana, 1994. Back
to the contents list
Illustrations and
FREE ONLINE COLOUR If, together with your accepted article, you submit usable colour and black/white figures
then Elsevier will ensure, at no additional charge, that these figures will appear in colour on the web (e.g., ScienceDirect and other
sites) regardless of whether or not these illustrations are reproduced in colour in the printed version. 'Usable' means the formats
comply with our instructions. See the information about Illustrations at http://www.eslevier.com/artworkinstructions.
For colour illustrations in the print journal see Colour Costs above. Back to the contents list
Tables: Tables should be numbered consecutively and given suitable captions
and each table should begin on a new page. No vertical rules should be used. Tables should not duplicate results presented elsewhere
in the manuscript (for example, in graphs). Footnotes to tables should be typed below the table and should be referred to by superscript
lowercase letters. Back to the contents list
Electronic
Annexes Authors may to submit electronic annexes, such as short videos, computer-enhanced images, audio clips
and large databases. Please refer to the Artwork Instructions (Multimedia files) at http://www.elsevier.com/artworkinstructions
for details on file types to be used. When submitting your hardcopy, please supply 3 disks/CD ROMs containing the electronic annex
to the editor for review. In the text of your article you may wish to refer to the annex. This is not mandatory, however, if you do
wish to refer to the annex in the text then please do so using this example: "?see Electronic Annex 1 in the online version of this article."
Production will insert the relevant URL at the typesetting stage after this statement. Back to
the contents list
Authors will be notified of the
acceptance of their paper by the editor. The Publisher will also send a notification of receipt of the paper in production. Back
to the contents list
All authors must sign the Transfer
of Copyright agreement before the article can be published. This transfer agreement enables Elsevier to protect the copyrighted material
for the authors, but does not relinquish the authors' proprietary rights. The copyright transfer covers the exclusive rights to reproduce
and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of similar nature and
translations. Authors are responsible for obtaining from the copyright holder permission to reproduce any figures for which copyright
exists. For more information please go to our copyright page http://www.elsevier.com/authorrights. Back
to the contents list
No page charges: Publications in this journal is free of charge.
Free Offprints:
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail or, alternatively, 25 free paper offprints.
The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer
outlining the terms and conditions of use. Corresponding authors will be given the choice to buy extra offprints before printing of
the article. Authors who pay for colour illustrations will receive an extra 100 offprints free of charge.
