The entire submission and review process for the Journal of Constructional Steel Research is handled electronically, which shortens
publication times. All papers should be submitted electronically through http://ees.elsevier.com/jcsr
Prior to submitting
your paper, please follow the instructions given below. Please note that you must have an e-mail address to use the online submission
system
Authors submit their article online simply by registering, logging-in and submitting. Editors will then invite potential
reviewers by e-mail.
Online Submission: Articles intended for JCSR should be
submitted online using our Web-based submission tool. To submit your paper online, please go to http://ees.elsevier.com/jcsr
and upload your article and its associated artwork. A PDF will be generated and the reviewing process will be carried out using that
PDF. All correspondence between editor and author is performed by e-mail, and paper copies are not required. Detailed information on
how to submit your article online is included.
The system will convert your manuscript to a PDF for the review process. Elsevier
can accept text files in most standard word-processing formats but Microsoft Word is preferred. Alternatively, they can be in either
LaTex or PostScript. Graphics should be high-resolution and the preferred formats are either TIFF or JPEG. For further information on
the preparation of electronic artwork please refer to the following website: http://elsevier.com/artworkinstructions
Once
a paper has been accepted by the Editor and received by Elsevier, authors can track its progress through the system to publication, via
the online author tracking system. To do this go to http://www.elsevier.com/trackarticle
General: Types of contributions: Research papers; technical notes; research summaries; discussions; book reviews;
letters to the editors; conference reports; announcements of conferences and symposia.
Original material: Submission of
an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published
lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors
and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written
consent of the Publisher.
Editor's requirements: All contributions are read by two or more referees to ensure both
accuracy and relevance, and revisions to the script may thus be required. On acceptance, contributions are subject to editorial amendment
to suit house style. When a manuscript is returned for revision prior to final acceptance, the revised version must be submitted as soon
as possible after the author's receipt of the referees' reports. Revised manuscripts returned after four months will be considered as
new submissions subject to full re-review. Papers essentially of an advertising nature will not be accepted.
Language Editing: International Science Editing and Asia Science Editing can provide English language and copy editing services to authors who want
to publish in scientific, technical and medical journals and need assistance before they submit their article or, before it is accepted
for publication. Authors can contact these services directly: International Science Editing http://www.internationalscienceediting.com
and Asia Science Editing http://www.asiascienceediting.com or, for more information about language editing services, please
contact authorsupport@elsevier.com who will be happy to deal with any questions.
Please note Elsevier neither endorses
nor takes responsibility for any products, goods or services offered by outside vendors through our services or in any advertising. For
more information please refer to our terms and conditions http://www.elsevier.com/termsandconditions.
Detailed instructions
on manuscript preparation and artwork instructions can be found below. The editor reserves the right to return, prior to refereeing,
any manuscripts which do not conform to the instructions for manuscript preparation and artwork instruction, as well as papers which
do not fit the scope of the journal. Back to the contents list
Manuscript
Preparation: Structure: Follow this order when typing manuscripts:
Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgments, Appendix, References, Figure Captions and then Tables.
Collate acknowledgements in a separate section at the end of the article and do not include them on the title page, as a footnote to
the title or otherwise.
Back to the contents list
Text
Layout: Use double spacing and wide (3 cm) margins. (Avoid full justification, that is, do not use a constant
right-hand margin.) Ensure that each new paragraph is clearly indicated. Present tables and figure legends on separate pages at the end
of the manuscript. If possible, consult a recent issue of the journal to become familiar with layout and conventions. Number all pages
consecutively. Use 12 or 10 pt font size and standard fonts.
Please follow the instructions below for guidance on the style of the
journal. Most formatting codes are removed or replaced when your article is prepared for publication so there is no need for you to use
excessive layout styling. However, please do not use options such as automatic word breaking, justified layout, double columns or automatic
paragraph numbering (especially for numbered references). Do use bold face, italic, subscripts, superscripts. When preparing tables,
if you are using a table grid, please use only one grid for each separate table and not a grid for each row. If no grid is being used,
use tabs to align columns instead of spaces.
Back to the contents list
Corresponding
author: Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication,
also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address
and the complete postal address. Full postal addresses must be given for all co-authors. Please consult a recent journal paper
for style if possible. Back to the contents list
Abstract: Enclose a self-contained abstract outlining the aims, scope and conclusions of the paper. It should be a single
paragraph and not exceed 100 words. Back to the contents list
Keywords: Immediately following the abstract, provide a maximum of six keywords (avoid, for example, 'and', 'of'). Be sparing
with abbreviations: only abbreviations firmly established in the field may be eligible. Back to
the contents list
Units: Follow internationally accepted
rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI. Back
to the contents list
Maths: Number consecutively any equations
that have to be displayed, separately from the text (if referred to explicitly in the text). Mathematical symbols and formulae should
be typed. Particular care should be exercised in identifying all symbols and in avoiding ambiguities. Distinction should be made between
the number one (1) and letter l, and between the number zero (0) and the letter O. Equation numbers should appear in parentheses and
be numbered consecutively. All equation numbers must appear on the right-hand side of the equation and should be referred to within the
text. Use the following sequence of parentheses: ) ] }.
References: All
publications cited in the text should be presented in a list of references following the text of the manuscript. [1] Bulson PS.
The stability of flat plates. London: Chatto and Windus; 1970.. [2] Uy B. Local and post-local buckling of concrete fillet steel
welded box columns. J Construct Steel Res 1998;47(1-2):47-72. [3] Banichuk NK. Application of perturbation method to optimal design
of structures. In: Atrek E, Gallagher RH, Ragsdell KM, Zienkiewicz OC, editors. New directions in optimum structural design. New York:
John Wiley, 1984. [4] Cojocaru EC, Irschik H, Schlacher K. Elastically supported beam carrying a beam moving at constant speed.
In: Grundmann, Schueller, editors. Proceedings of Structural Dynamics, EURODYN 2003. Rotterdam: A.A. Balkema; 2002. [5] Schafer
BW. Design manual for the direct strength method of cold-formed steel design. Final report to the American Iron and Steel Institute,
Washington, DC; 2002. Back to the contents list
Free Online Colour: If, together with your accepted article, you submit
usable colour and black/white figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on
the web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed
version. ' Usable' means the formats comply with our instructions. See the information about Illustrations at http://elsevier.com/artworkinstructions
For colour illustrations in the print journal see Colour Costs above. Back to the contents list
Tables: Tables should be numbered consecutively and given suitable caption
and each table should begin on a new page. No vertical rules should be used. Tables should not duplicate results presented elsewhere
in the manuscript (for example, in graphs). Footnotes to tables should be typed below the table and should be referred to by superscript
lowercase letters. Back to the contents list
Authors will be notified of the acceptance of their paper by the editor. The Publisher will also send a notification of receipt of
the paper in production. Back to the contents list
All authors must sign the Transfer of Copyright Agreement before the article can be published. This transfer
agreement enables Elsevier to protect the copyrighted material for the authors, but does not relinquish the authors' proprietary rights.
The copyright transfer covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions,
microfilm or any other reproductions of similar nature and translations. Authors are responsible for obtaining from the copyright holder
permission to reproduce any figures for which copyright exists. For more information please go to our copyright page http://www.elsevier.com/copyright. Back to the contents list
One set of page proofs in PDF format will be sent by e-mail to the corresponding author, to be checked for typesetting/editing.
Proofreading is solely the author's responsibility. You should note any corrections and return the proofs within 48 hours. Answer any
queries in full. Please correct factual errors only, or errors introduced by typesetting. No changes in, or additions to, the accepted
(and subsequently edited) manuscript will be allowed at this stage. For more information on proofreading please go to http://www.elsevier.com/authors.
Please note that once your paper has been proofed we publish the identical paper online as in print. Back
to the contents list
No page charges:
Publication in this journal is free of charge.
Free Offprints: Twenty-five offprints will be supplied free of charge. Corresponding
authors will be given the choice to buy extra offprints before printing of the article. Authors who pay for colour illustrations will
receive an extra one hundred offprints free of charge.
Author Discount: Contributors to Elsevier journals are entitled to
a 30% discount on all Elsevier books except Major Reference Works. See http://www.elsevier.com/bookauthors for more information.
