Guide for Authors
Transport
Policy is an international journal aimed at bridging the gap between theory and practice in transport. Its subject areas reflect
the concerns of policymakers in government, industry, voluntary organisations and the public at large, providing independent, original
and rigorous analysis to understand how policy decisions have been taken, monitor their effects, and suggest how they may be improved.
The journal treats the transport sector comprehensively, and in the context of other sectors including energy, housing, industry
and planning. All modes are covered: land, sea and air; road and rail; public and private; motorised and non-motorised; passenger and
freight. It is recognised that policy concerns in transport have to be very wide, to cover safety, efficiency, economic development,
local and global environmental impact, energy, land-use, equity and access for the widest range of travellers with special needs.
Policy topics include expectations of traffic growth and how to cope with it; infrastructure and vehicle design; traffic restraint, calming,
management and control; regulation, deregulation and privatisation; economic and commercial pricing policy; and the methodological tools
available to predict and assess the effects of alternative policy options.
It is intended to give special priority to understanding
the nature and influences affecting policy change, including technical, attitudinal, institutional, structural and political constraints.
Detailed local and sectoral case studies will be recorded, with an emphasis on policy and management implications.
Types of paper
Articles should be 4000-6000 words long, although articles longer than 6000 words will
be accepted on an occasional basis, if the topic demands this length of treatment. Authors are responsible for ensuring that all manuscripts
(whether original or revised) are accurately typed before final submission. Manuscripts will be returned to the author with a set of
instructions if they are not submitted according to our style.
Shorter Items
The Viewpoint section exists for the expression of
opinion, and allows authors to submit material which might not be appropriate for full-length articles but which contains ideas worthy
of publication (1500-2500 words).
Book reviews are welcomed (800-1200 words).
Conference reports (1000-1500 words).
Ethics in publishing
For information on Ethics in publishing
and Ethical guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Changes to authorship
This
policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the
accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must
be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should
be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree
with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author
being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding
author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such
requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After
the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published
in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon
acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright
see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information.
An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement'
form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles
including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution
outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the funding source
You
are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly
describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing
of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this
should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and
policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals
published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To
learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This journal offers you the option of making your article freely available to all via the ScienceDirect
platform. To prevent any conflict of interest, you can only make this choice after receiving notification that your article has been
accepted for publication. The fee of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions
and funding bodies have entered into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements
are available at
http://www.elsevier.com/fundingbodies. Authors of accepted articles, who wish to take advantage of this
option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf). Whatever
access option you choose, you retain many rights as an author, including the right to post a revised personal version of your article
on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language
and language services
Please write your text in good English (American or British usage is accepted, but not a mixture
of these). Authors who require information about language editing and copyediting services pre- and post-submission please visit
http://webshop.elsevier.com/languageservices or our customer support
site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally online and
you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single
PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted
to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence,
including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submission Site for Transport Policy
To submit your paper please click here
http://ees.elsevier.com/jtrp/
Use of wordprocessing software
It is important that the file be
saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple
as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's
options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. When preparing tables,
if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs,
not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also
the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Note that source files of figures, tables
and text graphics will be required whether or not you embed your figures in the text. See also the section on Electronic artwork.
To
avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your wordprocessor.
Article structure
Subdivision - numbered sections
Divide your article into
clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included
in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be
given a brief heading. Each heading should appear on its own separate line.
Introduction
State
the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already published
should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A
Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation
for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.
Results
Results
should be clear and concise.
Discussion
This should explore the significance of the results
of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion
of published literature.
Conclusions
The main conclusions of the study may be presented
in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Glossary
Please supply, as a separate list, the definitions of field-specific terms used in your article.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations
in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly
for tables and figures: Table A.1; Fig. A.1, etc.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae
where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name),
please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all
affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide
the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also
post-publication.
Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address
and the complete postal address. Contact details must be kept up to date by the corresponding author.
•
Present/permanent
address.
If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address'
(or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work
must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A
concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major
conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References
should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided,
but if essential they must be defined at their first mention in the abstract itself.
Graphical abstract
A
Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture the
attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical
abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum
of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 × 13 cm using a regular
screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. See
http://www.elsevier.com/graphicalabstracts
for examples.
Authors can make use of Elsevier's Illustration and Enhancement service to ensure the best presentation of their images
also in accordance with all technical requirements:
Illustration
Service.
Highlights
Highlights are mandatory for this journal. They consist
of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the
online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including
spaces, per bullet point). See
http://www.elsevier.com/highlights for examples.
Keywords
Immediately
after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts
(avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible.
These keywords will be used for indexing purposes.
Acknowledgements
Collate acknowledgements
in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote
to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing
assistance or proof reading the article, etc.).
Math formulae
Present simple formulae in
the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In
principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any
equations that have to be displayed separately from the text (if referred to explicitly in the text).
Footnotes
Footnotes
should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build
footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and
present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table
footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your
original artwork.
• Save text in illustrations as 'graphics' or enclose the font.
• Only use the following fonts in
your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
•
Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images
near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic
artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this
site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when
your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats (note the resolution requirements
for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text
as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings:
use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
If
your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is'.
Please
do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low;
•
Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files)
and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure,
at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed version.
For color reproduction in print, you will receive information
regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or
on the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version
should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the
figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep text in
the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number
tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them
with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables
do not duplicate results described elsewhere in the article.
References
Citation
in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any
references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference
list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference
style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'.
Citation of a reference as 'in press' implies that the item has been accepted for publication.
Web references
As
a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author
names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the
reference list) under a different heading if desired, or can be included in the reference list.
Reference
management software
This journal has standard templates available in key reference management packages EndNote (
http://www.endnote.com/support/enstyles.asp)
and Reference Manager (
http://refman.com/support/rmstyles.asp). Using plug-ins to wordprocessing packages, authors only
need to select the appropriate journal template when preparing their article and the list of references and citations to these will be
formatted according to the journal style which is described below.
References
For
Transport
Policy the Harvard system is to be used; author's names (no initials) an dates (and specific pages, only in the case of quotations)
are given in the main body of the text,eg (Thomson, 1988, p. 29). References are listed alphabetically at the end of the paper, double
spaced, and conform to current journal style:
For journals: Button, K. (1992) 'Transport regulation and the environment
in low income countries',
Utilities Policy, 2(3), pp. 248-257
For books: Hass-Klau, C. (1990)
The Pedestrian
and City Traffic, Belhaven Press, London.
For chapters of edited books: Allsop, R.E. (1974) 'Some possibilities for
using traffic control to influence trip distribution and mode choice', in Buckley, D.J. (ed)
Transportation and Traffic Theory,
A.H. & A.W. Reed, Sydney.
For grey literature: Lam, W.H.K., Lo, H.P. and Chung, C.M. (1990) 'A unified framework for estimating
origin-destination matrices for roadside interviews'. Paper presented at the 3rd International Conference on Survey Methods in Transportation,
Washington DC, January 1990
Other publications: Where there is doubt include all bibliographical details.
Footnotes
should be indicated in the text by superior Arabic numerals which run consecutively through the paper. They should be grouped together
in a section at the end of the text in numerical order and double spaced.
Journal abbreviations source
Journal
names should be abbreviated according to
Index Medicus journal abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Video data
Elsevier accepts video material and
animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit
with their article are strongly encouraged to include these within the body of the article. This can be done in the same way as a figure
or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should
be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material
is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size of 50 MB. Video and
animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation
or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed
instructions please visit our video instruction pages at
http://www.elsevier.com/artworkinstructions. Note: since video
and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version
for the portions of the article that refer to this content.
Supplementary data
Elsevier
accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional
possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files
supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data
in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply
a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
The following list will be useful during the final checking of an article prior to sending
it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following
items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded, and contain:
•
Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
•
Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
•
All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use
of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color
reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white
in print
• If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at
http://support.elsevier.com.
Content Checklist
Have you told readers, at
the outset, what they might gain by reading your paper?
Have you made the aim of your work clear?
Have you explained the significance
of your contribution?
Have you set your work in the appropriate context by giving sufficient background (including a complete set
of relevant references) to your work?
Have you addressed the question of practicality and usefulness?
Have you identified future
developments that may result from your work?
Have you structured your paper in a clear and logical fashion?
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may
be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a
document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for
citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The correct
format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do
not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download
the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe
Reader version 7 (or higher) available free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files
will accompany the proofs (also given online). The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return
them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark
the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the
pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text,
tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission
from the Editor. We will do everything possible to get your article published quickly and accurately – please let us have all your
corrections within 48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully
before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that
Elsevier may proceed with the publication of your article if no response is received.
Offprints
The
corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can
be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version
of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions
of use.
For inquiries relating to the submission of articles (including
electronic submission) please visit this journal's homepage. Contact details for questions arising after acceptance of an article, especially
those relating to proofs, will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle.
You can also check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
