Guide for Authors
Ethics in publishing
For information on Ethics in publishing
and Ethical guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.If a paper has been published as a full article within a conference
proceedings it wiil not be considered for publication in the journal.
Submission declaration and verification
Submission
of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published
lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors
and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published
elsewhere in the same form, in English or in any other language, including electronically without the written consent of the copyright-holder.
To verify originality, your article may be checked by the originality detection software iThenticate. See also
http://www.elsevier.com/editors/plagdetect.
Changes to authorship
This policy concerns the addition, deletion, or rearrangement of author names in the
authorship of accepted manuscripts:
Before the accepted manuscript is published in an online issue: Requests to add or remove
an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript
and must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail,
fax, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors,
this includes confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded
by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers
will inform the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until
authorship has been agreed.
After the accepted manuscript is published in an online issue: Any requests to add, delete, or
rearrange author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement'
(for more information on this and copyright see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure
the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript
together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce
tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of
the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations
and translations (please consult
http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included,
the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted
forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained
author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to:
http://www.elsevier.com/authorsrights.
Funding body agreements and policies
Elsevier
has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply
with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements
and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This
journal offers you the option of making your article freely available to all via the ScienceDirect platform. To prevent any conflict
of interest, you can only make this choice after receiving notification that your article has been accepted for publication. The fee
of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions and funding bodies have entered
into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements are available at
http://www.elsevier.com/fundingbodies.
Authors of accepted articles, who wish to take advantage of this option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf).
Whatever access option you choose, you retain many rights as an author, including the right to post a revised personal version of your
article on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://webshop.elsevier.com/languageservices
or our customer support site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally online and
you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single
PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted
to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence,
including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submit your article
Please submit your article via
http://ees.elsevier.com/jtma
Use of wordprocessing software
It is important that the file be
saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple
as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's
options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. When preparing tables,
if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs,
not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also
the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Note that source files of figures, tables
and text graphics will be required whether or not you embed your figures in the text. See also the section on Electronic artwork.
To
avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your wordprocessor. Please
include page numbers within your submission.
Article structure
Subdivision
- numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1
(then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing:
do not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Theory
A Theory section should extend, not repeat, the background to the article already dealt with in the
Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from a theoretical
basis.
Material and Methods
Provide sufficient detail to allow the work to be reproduced. Methods already pubished should
be indicated by a reference: only relevant modifications should be described.
Vitae:
Include as a separate document a short (maximum
100 words) biography of each author, along with a passport-type photograph accompanying the other figures.
Essential
title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval
systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name
may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work
was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in
front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available,
the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at
all stages of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers (with country and area code)
are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date by the corresponding
author.
•
Present/permanent address.
If an author has moved since the work described in the article was done,
or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address
at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for
such footnotes.
Abstract
A concise and factual abstract is required. The abstract should
state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from
the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s)
and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention
in the abstract itself.
The abstract should not exceed 150 words.
Graphical abstract
A
Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture the
attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical
abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum
of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 × 13 cm using a regular
screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. See
http://www.elsevier.com/graphicalabstracts
for examples.
Authors can make use of Elsevier's Illustration and Enhancement service to ensure the best presentation of their images
also in accordance with all technical requirements:
Illustration
Service.
Highlights
Highlights are a short collection of bullet points that
convey the core findings of the article. Highlights should be submitted in a separate file in the online submission system. Please use
'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including spaces, per bullet point). See
http://www.elsevier.com/highlights
for examples.
Keywords
Immediately after the abstract, provide a maximum of 8 keywords,
avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations
firmly established in the field may be eligible.
Footnotes:
Footnotes should be used sparingly. Number them consecutively throughout
the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should
this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the
article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript
lowercase letter.
Acknowledgements
Include acknowledgements on the title page, as a footnote
to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing
assistance or proof reading the article, etc.).
Please avoid including any acknowledgements or personal information that might identify
you in the body of the paper.
Electronic artwork
General points
•
Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as 'graphics' or enclose
the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations
according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions
to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit each figure
as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel)
then please supply 'as is'.
Please do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT,
WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately
large for the content.
Color artwork
Please make sure that artwork files are in an acceptable
format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color
figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and
other sites) regardless of whether or not these illustrations are reproduced in color in the printed version.
For color reproduction
in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate
your preference for color: in print or on the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting
color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black
and white versions of all the color illustrations.
Figure captions
Ensure that each illustration
has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (
not on the figure
itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations
used.
Tables
Number tables consecutively in accordance with their appearance in the text.
Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing
in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference cited in the
text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished
results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references
are included in the reference list they should follow the standard reference style of the journal and should include a substitution of
the publication date with either 'Unpublished results' or 'Personal communication'. Citation of a reference as 'in press' implies that
the item has been accepted for publication.
Web references
As a minimum, the full URL should
be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to
a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different
heading if desired, or can be included in the reference list.
APA (American Psychological Association)
Text:
Citations in the text should follow the referencing style used by the American Psychological Association. You are referred to the Publication
Manual of the American Psychological Association, Sixth Edition, ISBN 978-1-4338-0561-5, copies of which may be ordered from
http://books.apa.org/books.cfm?id=4200067
or APA Order Dept., P.O.B. 2710, Hyattsville, MD 20784, USA or APA, 3 Henrietta Street, London, WC3E 8LU, UK. Details concerning this
referencing style can also be found at
http://linguistics.byu.edu/faculty/henrichsenl/apa/apa01.html.
List:
references should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from
the same author(s) in the same year must be identified by the letters 'a', 'b', 'c', etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J. A. J., & Lupton, R. A. (2010). The art of writing a scientific
article.
Journal of Scientific Communications, 163, 51–59.
Reference to a book:
Strunk, W., Jr., &
White, E. B. (2000).
The elements of style. (4th ed.). New York: Longman, (Chapter 4).
Reference to a chapter in an edited
book:
Mettam, G. R., & Adams, L. B. (2009). How to prepare an electronic version of your article. In B. S. Jones, & R. Z.
Smith (Eds.),
Introduction to the electronic age (pp. 281–304). New York: E-Publishing Inc.
Submission
checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the
journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following
items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
•
Telephone and fax numbers
All necessary files have been uploaded
• Title page as one file, manuscript without any author
information as a separate file, figures and tables as separate files, keywords
• All figure captions
• All tables (including
title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
•
References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text,
and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
•
Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced
in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white
versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site
at
http://support.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic
documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial
electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles
in press' because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows
(example taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the
DOI to create URL hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One
set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper
proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now
provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available
free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files will accompany the proofs (also given online).
The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If
you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them
to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections
and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail,
or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures.
Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor.
We will do everything possible to get your article published quickly and accurately – please let us have all your corrections within
48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying,
as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed
with the publication of your article if no response is received.
Offprints
The corresponding
author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via
the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published
article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
For inquiries relating to the submission of articles (including electronic submission) please
visit this journal's homepage. Contact details for questions arising after acceptance of an article, especially those relating to proofs,
will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle. You can also
check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
