It is a condition of publication that all manuscripts must be written in clear
and grammatically correct English and be submitted to the Engineering Failure Analysis electronic submission site at http://ees.elsevier.com/efa Authors are requested to transmit the text and art of the manuscript in electronic form
to this address. Each manuscript must also be accompanied by a cover letter outlining the basic findings of the paper and their significance.
Hardcopy submissions are no longer accepted.
Prior to submitting your paper, please follow the instructions given below. Please
note that you must have an e-mail address to use the online submission system. Authors submit their article online by simply registering,
logging-in, and submitting.
The system automatically converts source files to a single Adobe Acrobat PDF version of the article,
which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF at submission for
the review process, these source files are needed for further processing after acceptance. All correspondence, including notification
of the Editor's decision and requests for revision, takes place by e-mail, removing the need for a hard-copy paper trail.
Detailed
instructions on the use of the online submission system are available at http://ees.elsevier.com/efa
Please read the "Hints"
for information on how to register, and review the "Tutorial for Authors" for a run-through of the submission process. If you
need any further help, please do not hesitate to contact our Author Support Department: authorsupport@elsevier.com
Submission Language: English. Language Polishing. Authors who require information about language editing and copyediting
services pre- and post-submission please visit www.elsevier.com/locate/languagepolishing or contact authorsupport@elsevier.com
for more information. Please note Elsevier neither endorses nor takes responsibility for any products, goods or services offered by outside
vendors through our services or in any advertising. For more information please refer to our Terms & Conditions: http://www.elsevier.com/termsandconditions
Types of contributions: Original research papers, short communications and occasional reviews.
NOTE: Authors contributing
to special issues should ensure that they make the appropriate selections from the Article Type menu and the 'Select Section/Category'
menu. Authors at Chinese research institutes are kindly asked to select 'Regular Papers from China' from the 'Select Section/Category'
menu.
Corresponding author: Clearly indicate who is responsible for correspondence at all stages of refereeing and publication,
including post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail
address and the complete postal address. Full postal addresses must be given for all co-authors. Please consult a recent journal
paper for style if possible.
Original material: Submission of an article implies that the work described has not been
published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration
for publication elsewhere, that its publication is approved by all authors and that, if accepted, it will not be published elsewhere
in the same form, in English or in any other language, without the written consent of the copyright-holder. A statement to this effect
should be included in the covering letter which accompanies the manuscript.
Detailed instructions on manuscript preparation and
artwork instructions can be found below. The editor reserves the right to return manuscripts that do not conform to the instructions
for manuscript preparation and artwork instruction, as well as paper that do not fit the scope of the journal, prior to refereeing. Upon acceptance of an article, authors will be asked to sign a 'Journal Publishing Agreement' (for more information on this and
copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination
of information. An e-mail (or letter) will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal
Publishing Agreement' form or a link to the online version of this agreement. Subscribers may reproduce tables of contents or prepare
lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for
resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written
permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these
cases: please consult http://www.elsevier.com/permissions.
Funding body agreements and policies Elsevier
has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply
with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements
and policies please visit http://www.elsevier.com/fundingbodies
Authors' rights As an author you (or
your employer or institution) retain certain rights; for details you are referred to: http://www.elsevier.com/authorsrights.
General: Editors reserve the right to adjust style to certain standards of uniformity. Please use Word, Word Perfect
or LaTeX files for the text of your manuscript. (For further information about LaTeX submission, please go to http://www.elsevier.com/latex.)
Back to contents list
Structure: Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Nomenclature, Main text, Acknowledgements,
Appendix, References, Figure Captions and then Tables. Collate acknowledgements in a separate section at the end of the article and
do not include them on the title page, as a footnote to the title or otherwise. Back to the contents
list
Text Layout: Use double spacing and wide margins. Avoid
full justification, i.e., do not use a constant right-hand margin. Ensure that each new paragraph is clearly indicated. Present tables
and figure legends on separate pages at the end of the manuscript. If possible, consult a recent issue of the journal to become familiar
with layout and conventions. Number all pages consecutively, use 12 or 10 pt font size and standard fonts. Back
to the contents list
Corresponding author: Clearly indicate
who is responsible for correspondence at all stages of refereeing and publication, including post-publication. Ensure that telephone
and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Full
postal addresses must be given for all co-authors. Please consult a recent journal paper for style if possible. Back
to the contents list
Abstract: A self-contained abstract
outlining in a single paragraph the aims, scope and conclusions of the paper must be supplied. Back
to the contents list
Keywords: Immediately after the abstract,
provide a maximum of five keywords taken from the
list appearing at the back of each issue.
Symbols: Mathematical symbols and formulae should be typed. Particular care should be exercised in identifying all symbols
and in avoiding ambiguities. Distinction should be made between the number one and the letter l, and between zero and the letter O.
Units: Follow internationally accepted rules and conventions: use the international
system of units (SI). If other quantities are mentioned, give their equivalent in SI. Back to the
contents list
Maths: Equation numbers should appear in parentheses
and be numbered consecutively. All equation numbers must appear on the right-hand side of the equation and should be referred to within
the text.
References: All publications cited in the text should be presented
in a list of references following the text of the manuscript. In the text refer to references by a number in square brackets on the line
(e.g. Since Cleland[1]), and the full reference should be given in a numerical list at the end of the paper. References should be given
in the following form: [1] Cleland JH. What does the pitting resistance equivalent really tell us? Engng Fract Anal 1996;3(1):65-9.
[2] Van Baars S. Failure of cohesive granular materials. Proceedings of the Ninth International Conference on Fracture, Sydney: 1997.
Oxford: Pergamon; 1997. p. 917-26. [3] Liew KM, Wang CM, Xiang Y, Kitipornchai S. Vibration of Mindlin plates. Oxford: Elsevier;
1998. [4] Jones DRH, editor. Failure analysis case studies. Oxford: Pergamon; 1998.
Back to
the contents list Back to the contents list
FREE ONLINE COLOUR If, together with your accepted article, you submit
usable colour and black/white figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on
the web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed
version. ' Usable' means the formats comply with our instructions. See the information about Illustrations at http://www.elsevier.com/artworkinstructions.
For colour illustrations in the print journal see Colour Costs above. Back to the contents list
Tables: Tables should be numbered consecutively and given suitable captions
and each table should begin on a new page. No vertical rules should be used. Tables should not duplicate results presented elsewhere
in the manuscript (for example, in graphs). Footnotes to tables should be typed below the table and should be referred to by superscript
lowercase letters. Back to the contents list
Electronic
Annexes Authors are now able to submit electronic annexes, such as short videos, computer-enhanced images, audio
clips and large databases. Please refer to the Artwork Instructions (Multimedia files) at http://www.elsevier.com/artworkinstructions
for details on file types to be used. If you are submitting on hardcopy, please supply 3 disks/CD ROMs containing the electronic annex
to the editor for review. In the text of your article you may wish to refer to the annex. This is not mandatory, however, if you do
wish to refer to the annex in the text then please do so using this example: "?see Electronic Annex 1 in the online version of this article."
Production will insert the relevant URL at the typesetting stage after this statement. Back to
the contents list
Authors will be notified of the
acceptance of their paper by the editor. The Publisher will also send a notification of receipt of the paper in production. Back
to the contents list
All authors must sign the Transfer
of Copyright agreement before the article can be published. This transfer agreement enables Elsevier to protect the copyrighted material
for the authors, but does not relinquish the authors' proprietary rights. The copyright transfer covers the exclusive rights to reproduce
and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of similar nature and
translations. Authors are responsible for obtaining from the copyright holder permission to reproduce any figures for which copyright
exists. For more information please go to our copyright page http://www.elsevier.com/copyright. Back
to the contents list
No page charges: Publications in this journal is free of charge.
Free Offprints:
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail or, alternatively, 25 free paper offprints.
The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer
outlining the terms and conditions of use. Corresponding authors will be given the choice to buy extra offprints before printing of
the article. Authors who pay for colour illustrations will receive an extra 100 offprints free of charge.
Author Discount:
Contributors to Elsevier journals are entitled to a 30% discount on all Elsevier books. See http://www.elsevier.com/bookauthorsfor
for more information.
