Guide for Authors
Types of paper
Contributions
falling into the following categories will be considered for publication: Original high-quality research papers; the preparation of review
articles may be invited by the Editor, but it is requested that no uninvited submissions of that kind be submitted. Please ensure that
you select the appropriate article type from the list of options when making your submission. Authors contributing to special issues
should ensure that they select the special issue article type from this list.
Ethics in publishing
For information on Ethics in publishing and Ethical guidelines for journal publication
see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including
any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work
that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Contributors
Each author is required to declare his or her individual contribution to the article: all authors
must have materially participated in the research and/or article preparation, so roles for all authors should be described. The statement
that all authors have approved the final article should be true and included in the disclosure.
Changes
to authorship
This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted
manuscripts:
Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange
the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a)
the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from
all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes
confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the
Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform
the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship
has been agreed.
After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange
author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement'
(for more information on this and copyright see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure
the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript
together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce
tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of
the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations
and translations (please consult
http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included,
the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted
forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained
author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to:
http://www.elsevier.com/authorsrights.
Role of the funding source
You are requested
to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe
the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report;
and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this should be stated.
Please see
http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier
has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply
with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements
and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This
journal offers you the option of making your article freely available to all via the ScienceDirect platform. To prevent any conflict
of interest, you can only make this choice after receiving notification that your article has been accepted for publication. The fee
of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions and funding bodies have entered
into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements are available at
http://www.elsevier.com/fundingbodies.
Authors of accepted articles, who wish to take advantage of this option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf).
Whatever access option you choose, you retain many rights as an author, including the right to post a revised personal version of your
article on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://webshop.elsevier.com/languageservices
or our customer support site at
http://support.elsevier.com
for more information.
Referees
Please submit, with the manuscript, the names, addresses
and e-mail addresses of three potential referees. Note that the editor retains the sole right to decide whether or not the suggested
reviewers are used.
Additional Information
Papers submitted to the journal should have figures
and tables embedded within the main body of the text. Should the paper be accepted, then the figures and tables should be uploaded as
separate files. JMPS welcomes video material, animation sequences and other electronic supplementary material to support and enhance
your scientific research. If you have video or animation files that you wish to submit with your article, please provide the files in
one of our recommended file formats with a maximum size of 10 MB. For more information, please see the Video Data and Supplementary Data
sections lower down this page.
Use of wordprocessing software
It
is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep
the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular,
do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts
etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables,
if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs,
not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also
the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication).
To avoid unnecessary errors you are
strongly advised to use the "spell-check" and "grammar-check" functions of your wordprocessor.
LaTeX
If
the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should preferably be written using Elsevier's
document class 'elsarticle', or alternatively any of the other recognized classes and formats supported in Elsevier's electronic submissions
system, for further information see
http://www.elsevier.com/wps/find/authorsview.authors/latex-ees-supported.
The Elsevier
'elsarticle' LaTeX style file package (including detailed instructions for LaTeX preparation) can be obtained from the Quickguide:
http://www.elsevier.com/latex.
It consists of the file: elsarticle.cls, complete user documentation for the class file, bibliographic style files in various styles,
and template files for a quick start.
Article structure
Subdivision - numbered
sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1,
1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do
not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature
survey or a summary of the results.
Material and methods
Provide sufficient detail to allow
the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt
with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development
from a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results
and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The
main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion
or Results and Discussion section.
Appendices
If there is more than one appendix, they should
be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a
subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
Vitae
Include
in the manuscript a short (maximum 100 words) biography of each author, along with a passport-type photograph accompanying the other
figures.
Essential title page information
•
Title.
Concise and informative.
Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
•
Author names
and affiliations.
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors'
affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter
immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including
the country name and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate
who will handle correspondence at all stages of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers
(with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be
kept up to date by the corresponding author.
•
Present/permanent address.
If an author has moved since the
work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as
a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address.
Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual
abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An
abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided,
but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential
they must be defined at their first mention in the abstract itself.
Graphical abstract
A
Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture the
attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical
abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum
of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 × 13 cm using a regular
screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. See
http://www.elsevier.com/graphicalabstracts
for examples.
Authors can make use of Elsevier's Illustration and Enhancement service to ensure the best presentation of their images
also in accordance with all technical requirements:
Illustration
Service.
Highlights
Highlights are mandatory for this journal. They consist
of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the
online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including
spaces, per bullet point). See
http://www.elsevier.com/highlights for examples.
Keywords
A
list of up to five keywords should appear on the title page of each paper submitted for consideration, following the abstract. Authors
should select their keywords from
the
list appearing at the back of the journal, although they may choose one word which is not in this list.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first
page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as
in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate
acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title
page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language
help, writing assistance or proof reading the article, etc.).
Nomenclature and units
Follow
internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their
equivalent in SI. You are urged to consult IUPAC: Nomenclature of Organic Chemistry:
http://www.iupac.org/ for further information.
Nomenclature and units
Follow internationally accepted rules and conventions: use the international system
of units (SI). If other quantities are mentioned, give their equivalent in SI. Authors wishing to present a table of nomenclature should
do so on the second page of their manuscript.
Math formulae
Present simple formulae in the
line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle,
variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations
that have to be displayed separately from the text (if referred to explicitly in the text).
Footnotes
Footnotes
should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build
footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and
present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table
footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artworkd
General points
• Make sure you use uniform lettering and sizing of your
original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in
your illustrations: Arial, Courier, Helvetica, Times, Symbol.
• Number the illustrations according to their sequence in the
text.
• Use a logical naming convention for your artwork files..
• Produce images near to the desired size of the printed
version.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications
please supply "as is".
Please do not:
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG);
the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately
large for the content
Color artwork
Please make sure that artwork files are in an acceptable
format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color
figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and
other sites) regardless of whether or not these illustrations are reproduced in color in the printed version.
For color reproduction
in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate
your preference for color: in print or on the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting
color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black
and white versions of all the color illustrations.
Figure captions
Ensure that each illustration
has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (
not on the figure
itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations
used.
Tables
Number tables consecutively in accordance with their appearance in the text.
Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing
in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference cited in the
text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished
results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references
are included in the reference list they should follow the standard reference style of the journal and should include a substitution of
the publication date with either 'Unpublished results' or 'Personal communication'. Citation of a reference as 'in press' implies that
the item has been accepted for publication.
Web references
As a minimum, the full URL should
be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to
a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different
heading if desired, or can be included in the reference list.
References in a special issue
Please
ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same
Special Issue.
Reference management software
This journal has standard templates available
in key reference management packages EndNote (
http://www.endnote.com/support/enstyles.asp) and Reference Manager (
http://refman.com/support/rmstyles.asp).
Using plug-ins to wordprocessing packages, authors only need to select the appropriate journal template when preparing their article
and the list of references and citations to these will be formatted according to the journal style which is described below.
Reference style
Text: All citations in the text should refer to:
1.
Single author: the
author's name (without initials, unless there is ambiguity) and the year of publication;
2.
Two authors: both authors' names
and the year of publication;
3.
Three or more authors: first author's name followed by 'et al.' and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed first alphabetically, then chronologically.
Examples: 'as demonstrated (Allan, 2000a, 2000b, 1999; Allan and Jones, 1999). Kramer et al. (2010) have recently shown ....'
List:
References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from
the same author(s) in the same year must be identified by the letters 'a', 'b', 'c', etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2010. The art of writing a scientific article.
J. Sci. Commun. 163, 51–59.
Reference to a book:
Strunk Jr., W., White, E.B., 2000. The Elements of Style, fourth ed. Longman,
New York.
Reference to a chapter in an edited book:
Mettam, G.R., Adams, L.B., 2009. How to prepare an electronic version of
your article, in: Jones, B.S., Smith , R.Z. (Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281–304.
Journal abbreviations source
Journal names should be abbreviated according to
Index Medicus journal abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Video data
Elsevier
accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files
that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done
in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed.
All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your
video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum
size of 50 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web
products, including ScienceDirect:
http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose
any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the
link to your video data. For more detailed instructions please visit our video instruction pages at
http://www.elsevier.com/artworkinstructions.
Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and
the print version for the portions of the article that refer to this content.
Supplementary data
Elsevier
accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional
possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files
supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data
in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply
a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
The following list will be useful during the final checking of an article prior to sending
it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following
items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded, and contain:
•
Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
•
Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
•
All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use
of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color
reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white
in print
• If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at
http://support.elsevier.com.
Use of the Digital
Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists
of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication.
The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they
have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from
a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL
hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One
set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper
proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now
provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available
free from
http://get.adobe.com/reader. Instructions on how to annotate PDF files will accompany the proofs (also given online).
The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If
you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them
to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections
and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail,
or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures.
Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor.
We will do everything possible to get your article published quickly and accurately – please let us have all your corrections within
48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying,
as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed
with the publication of your article if no response is received.
Offprints
The corresponding
author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via
the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published
article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
For inquiries relating to the submission of articles (including electronic submission) please
visit this journal's homepage. Contact details for questions arising after acceptance of an article, especially those relating to proofs,
will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle. You can also
check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
