It is a condition
of publication that all manuscripts must be written in clear and grammatically correct English and be submitted to the International
Journal of Mechanical Sciences electronic submission site at http://ees.elsevier.com/submit2ijms Authors
are requested to transmit the text and art of the manuscript in electronic form to this address. Each manuscript must also be accompanied
by a cover letter outlining the basic findings of the paper and their significance. Hardcopy submissions are no longer accepted.
Prior
to submitting your paper, please follow the instructions given below. Please note that you must have an e-mail address to use the online
submission system. Authors submit their article online by simply registering, logging-in, and submitting.
The system automatically
converts source files to a single Adobe Acrobat PDF version of the article, which is used in the peer-review process. Please note that
even though manuscript source files are converted to PDF at submission for the review process, these source files are needed for further
processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place
by e-mail, removing the need for a hard-copy paper trail.
Detailed instructions on the use of the online submission system are available
at http://ees.elsevier.com/submit2ijms
Please read the "Hints" for information on how to register, and review
the "Tutorial for Authors" for a run-through of the submission process. If you need any further help, please do not hesitate
to contact our Author Support Department: authorsupport@elsevier.com
Submission Language: English. Language
Polishing. Authors who require information about language editing and copyediting services pre- and post-submission please visitwww.elsevier.com/locate/languagepolishing
or contact authorsupport@elsevier.com for more information. Please note Elsevier neither endorses nor takes responsibility
for any products, goods or services offered by outside vendors through our services or in any advertising. For more information please
refer to our Terms & Conditions: http://www.elsevier.com/termsandconditions
Types of contributions: Original
research papers
NOTE: Authors contributing to special issues should ensure that they make the appropriate selections from the Article
Type menu from the Request Editor menu.
Corresponding author: Clearly indicate who is willing to handle correspondence
at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code)
are provided in addition to the e-mail address and the complete postal address. Full postal addresses must be given for all co-authors.
Please consult a recent journal paper for style if possible.
Original material: Submission of an article implies that
the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic
thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and that, if accepted,
it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the copyright-holder. The covering letter should state that 'this is an original paper which has neither previously, nor simultaneously, in whole or in
part been submitted anywhere else'. Upon acceptance of an article, authors will be asked to sign a 'Journal Publishing Agreement'
(for more information on this and copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure
the widest possible dissemination of information. An e-mail (or letter) will be sent to the corresponding author confirming receipt of
the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement. Subscribers
may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions.
Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including
compilations and translations (please consult http://www.elsevier.com/permissions).
If excerpts from other copyrighted works
are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier
has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Funding
body agreements and policies Elsevier has established agreements and developed policies to allow authors whose articles appear
in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant
awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies
Authors'
rights As an author you (or your employer or institution) retain certain rights; for details you are referred to: http://www.elsevier.com/authorsrights.
Editors' requirements: Papers of a length exceeding 30 A4 pages (manuscript and figures) will not be acceptable unless
a prior arrangement has been made with the Editor.
Detailed instructions on manuscript preparation and artwork instructions can
be found below. The editor reserves the right to return manuscripts that do not conform to the instructions for manuscript preparation
and artwork instruction, as well as paper that do not fit the scope of the journal, prior to refereeing.
General: Editors reserve the right to adjust style to certain standards of uniformity. Please use Word, Word Perfect or LaTeX files for
the text of your manuscript that you upload onto the submission site. (For further information about LaTex submission, please go to
http://www.elsevier.com/latex.) Back to contents list
Structure: Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Nomenclature, Main
text, Acknowledgements, Appendix, References, Figure Captions and then Tables. Collate acknowledgements in a separate section at the
end of the article and do not include them on the title page, as a footnote to the title or otherwise. Back
to the contents list
Text Layout: Use a single column format,
double spacing and wide margins, and avoid full justification. Ensure that each new paragraph is clearly indicated. Table and figures
may be presented with captions within the main body of the manuscript, and additionally figures should be uploaded as high resolution
files if possible. Consult a recent issue of the journal to become familiar with layout and conventions. Number all pages consecutively,
use 12 or 10 pt font size and standard fonts. Back to the contents list
Abstract: A self-contained abstract outlining in a single paragraph the aims, scope and conclusions of the paper must
be supplied. Back to the contents list
Keywords: Immediately after the abstract, provide a maximum of six keywords (avoid, for example, 'and', 'of'). Be sparing
with abbreviations: only abbreviations firmly established in the field may be eligible. Back to
the contents list
Symbols: Notation should conform to that
most frequently used in the engineering field concerned. Particular care should be exercised in identifying all symbols and in avoiding
ambiguities. Distinction should be made between the number one (1) and the letter l, and between zero (0) and the letter O. Vectors and
tensors should be marked clearly on the manuscript. Back to the contents list
Units: The SI system should be used for all scientific and laboratory data. If, in certain instances, it is necessary
to quote other units, these should be added in parentheses. Temperatures should be given in degrees Celsius. The unit 'billion' (109
in America, 1012 in Europe) is ambiguous and must not be used. Back to the contents list
Maths: Number consecutively any equations that have to be displayed separately
from the text (if referred to explicitly in the text).
Back to the contents list
References: All publications cited in the text should be presented in a
list of references following the text of the manuscript. In the text refer to references by a number in square brackets on the line (e.g.
Since Paterson[1]), and the full reference should be given in a numerical list at the end of the paper.
References should be given
in the following form: [1] Singh B, Hassan SM. Transverse vibration of a circular plate with arbitrary thickness variation. Int
Jnl of Mech Sci 1998;40(11):1089-1104. [2] Riedel H, Sun DZ, Simulation of die pressing and sintering of powder metals, hard
metals and ceramics. In: Chenot KD, Zienkiewicz CC. Numerical methods in industrial forming processes, Balkema, Rotterdam, 1992. p. 883-886.
[3] Kulchytsky-Zhyhailo R, Yevtushenko A. Axi-Symmetric contact problem with frictional heating for thermally nonlinear sliders. Int Jnl of Mech Sci 1998;40(11): 1133-1143. Back to the contents list
The digital object identifier (DOI) may be used to cite and link
to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher
upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly
'Articles in press' because they have not yet received their full bibliographic information.
The correct format for citing a DOI is shown
as follows (example taken from a document in the journal Physics Letters B): doi:10.1016/j.physletb.2003.10.071 When
you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change. Back
to the contents list
FREE ONLINE COLOUR If, together with your accepted article, you submit usable colour and black/white figures then Elsevier will
ensure, at no additional charge, that these figures will appear in colour on the web (e.g., ScienceDirect and other sites) regardless
of whether or not these illustrations are reproduced in colour in the printed version. ' Usable' means the formats comply with our instructions.
See the information about Illustrations at http://www.elsevier.com/artworkinstructions . For colour illustrations in the
print journal see colour costs above. Back to the contents list
Tables: Tables should be numbered consecutively and given suitable caption and each table is laid out on a new page.
No vertical rules should be used. Tables should not duplicate results presented elsewhere in the manuscript (for example, in graphs).
Footnotes to tables should be typed below the table and should be referred to by superscript lowercase letters. Back
to the contents list
Electronic Annexes Authors may submit
electronic annexes, such as short videos, computer-enhanced images, audio clips and large databases. Please refer to the Artwork Instructions
(Multimedia files) at http://www.elsevier.com/artworkinstructions for details on file types to be used. In the text
of your article you may wish to refer to the annex. This is not mandatory, however, if you do wish to refer to the annex in the text
then please do so using this example: "?see Electronic Annex 1 in the online version of this article." Production will insert the relevant
URL at the typesetting stage after this statement. Back to the contents list
Authors will be notified of the acceptance of their paper by the editor. The Publisher will also send
a notification of receipt of the paper in production. Back to the contents list
All authors must sign the Transfer of Copyright agreement before the article can be published. This transfer
agreement enables Elsevier to protect the copyrighted material for the authors, but does not relinquish the authors' proprietory rights.
The copyright transfer covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions,
microfilm or any other reproductions of similar nature and translations. Authors are responsible for obtaining copyright from the holder
permission to reproduce any figures for which copyright exists. For more information please go to our copyright page http://www.elsevier.com/copyright.
Back to the contents list
No page charges: Publications in this journal is
free of charge.
Free Offprints: The corresponding author, at no cost, will be provided with a PDF file of the article via
e-mail or, alternatively, 25 free paper offprints. The PDF file is a watermarked version of the published article and includes a cover
sheet with the journal cover image and a disclaimer outlining the terms and conditions of use. Corresponding authors will be given the
choice to buy extra offprints before printing of the article. Authors who pay for colour illustrations will receive an extra 100 offprints
free of charge.
