Guide for Authors
Affiliated with the
Association for the Advancement of Automotive Medicine
See also Elsevier's Safety Research programme home
Accident Analysis & Prevention provides wide coverage of the general areas relating
to accidental injury and damage, including the pre-injury and immediate post-injury phases. Published papers deal with medical, legal,
economic, educational, behavioral, theoretical or empirical aspects of transportation accidents, as well as with accidents at other sites.
Selected topics within the scope of the Journal may include: studies of human, environmental and vehicular factors influencing the occurrence,
type and severity of accidents and injury; the design, implementation and evaluation of countermeasures; biomechanics of impact and human
tolerance limits to injury; modelling and statistical analysis of accident data; policy, planning and decision-making in safety.
Ethics in Publishing
For information
on Ethics in Publishing and Ethical guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All
authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships
with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived
to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except
in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this
and copyright see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination
of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing
Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists
of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale
or distribution outside the institution and for all other derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions).
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit
the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the
funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation
of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation
of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such
involvement then this should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose
articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://www.elsevier.com/languageediting or our customer support site at
http://epsupport.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally
online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files
to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are
converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All
correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for
a paper trail.
Submission Site for Accident Analysis & Prevention
To
submit your paper please click here
http://ees.elsevier.com/aap/
Use of wordprocessing software
It is important that the file be saved
in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as
possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's
options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed "graphically
designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table
grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns.
The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with
Elsevier:
http://www.elsevier.com/guidepublication). Do not import the figures into the text file but, instead, indicate
their approximate locations directly in the electronic text and on the manuscript. See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions of your wordprocessor.
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2,
etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to
"the text". Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed
literature survey or a summary of the results.
Material and methods
Provide
sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications
should be described.
Theory/calculation
A Theory section should extend,
not repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast,
a Calculation section represents a practical development from a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore
the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive
citations and discussion of published literature.
Conclusions
The
main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion
or Results and Discussion section.
Appendices
If there is more than
one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1),
Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on.
Essential title page
information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems.
Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name may be
ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was
done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front
of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail
address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages
of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers (with country and area code) are provided
in addition to the e-mail address and the complete postal address.
•
Present/permanent address.
If an author
has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent address")
may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main,
affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results
and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason,
References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should
be avoided, but if essential they must be defined at their first mention in the abstract itself.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general
and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established
in the field may be eligible. These keywords will be used for indexing purposes.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include
them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g.,
providing language help, writing assistance or proof reading the article, etc.).
Math
formulae
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal
line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently
denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the
text).
Footnotes
Footnotes should be used sparingly. Number them consecutively
throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be
used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at
the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a
table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing
of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following
fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
•
Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide
on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged
to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application
used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (note the resolution
requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save
the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line
drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please
do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document;
• Supply files that
are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color
artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct
resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge,
that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations
are reproduced in color in the printed version.
For color reproduction in print, you will receive information regarding the costs
from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on the Web only. For
further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please
note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version should
you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached
to the figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep
text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the
table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that
the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference
cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full.
Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these
references are included in the reference list they should follow the standard reference style of the journal and should include a substitution
of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that
the item has been accepted for publication.
Web references
As a minimum,
the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names,
dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference
list) under a different heading if desired, or can be included in the reference list.
Reference management software
This journal has standard templates available in key reference management packages
EndNote (
http://www.endnote.com) and Reference Manager (
http://www.refman.com). Using plug-ins to wordprocessing
packages, authors only need to select the appropriate journal template when preparing their article and the list of references and citations
to these will be formatted according to the journal style which is described below.
Reference
style
Text: All citations in the text should refer to:
1. Single author: the author's name (without initials, unless
there is ambiguity) and the year of publication;
3. Two authors: both authors' names and the year of publication; 3. Three or more
authors: first author's name followed by 'et al.' and the year of publication. Citations may be made directly (or parenthetically).
Groups of references should be listed first alphabetically, then chronologically.
Examples: "as demonstrated (Allan, 1996a, 1996b,
1999; Allan and Jones, 1995). Kramer et al. (2000) have recently shown ...."
List: References should be arranged first alphabetically
and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified
by the letters "a", "b", "c", etc., placed after the year of publication.
Examples:
Davis, G.A., Yihong, G., 1993. Statistical
methods to support induced exposure analysis of traffic accident data. Transportation Research Record 1404 (1), 43-49.
Fleming,
T.R., Harrington, D.P., 1990. Counting Process and Survival Analysis. John Wiley, New York.
Watanabe, K., Yamaguchi, T., 1989. Analysis
of factors affecting dummy readings in side impact tests. In: Proceedings of the 12th International Technical Conference on ESV, Gothenburg,
pp.1104-1114.
American Hospital Association, 1991. American Hospital Association Hospital Statistics, 1990-91 Edition, American
Hospital Association, Chicago, IL, Table 5c, p.135.
Journal abbreviations source
Journal names should be abbreviated according to
Index Medicus journal abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of serial title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Video data
Elsevier accepts
video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that
they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done in the
same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All
submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video
or animation material is directly usable, please provide the files in one of our recommended file formats with a maximum size of 30 MB
and running time of 5 minutes. Video and animation files supplied will be published online in the electronic version of your article
in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. Please supply 'stills' with your files:
you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will
personalize the link to your video data. For more detailed instructions please visit our video instruction pages at
http://www.elsevier.com/artworkinstructions.
Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and
the print version for the portions of the article that refer to this content.
Supplementary
data
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files
offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips
and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products,
including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable,
please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with
the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction
pages at
http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's Editor
for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone and
fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including
title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
•
References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text,
and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
•
Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced
in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white
versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site
at
http://epsupport.elsevier.com..
Use of the Digital Object Identifier
The Digital
Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string
which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore,
it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic
information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters
B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed
never to change.
Proofs
One set of page proofs (as PDF files) will be
sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will
be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can
be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from
http://www.adobe.com/products/acrobat/readstep2.html.
Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the
Adobe site:
http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations
function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your
corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including
replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof
only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the
article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible
to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back
to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed.
Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail.
For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication.
The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer
outlining the terms and conditions of use.
For inquiries
relating to the submission of articles (including electronic submission where available) please visit this journal's homepage. You can
track accepted articles at
http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's
status has changed. Also accessible from here is information on copyright, frequently asked questions and more. Contact details for questions
arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher.
Home | Elsevier Sites | Privacy Policy | Terms and Conditions | Feedback | Site Map | A Reed Elsevier Company