Guide for Authors
Earth and Planetary Science Letters uses an online, electronic submission system. By
accessing the website
http://ees.elsevier.com/epsl you will be guided stepwise through the creation and uploading of the
various files. When submitting a manuscript to Elsevier Editorial System, authors need to provide an electronic version of their manuscript.
The system automatically converts source files to a single Adobe Acrobat PDF version of the article, which is used in the peer-review
process. Please note that even though manuscript source files are converted to PDF at submission for the review process, these source
files are needed for further processing after acceptance.
Types of paper
The
author should specify a category designation for the manuscript (full length article, frontiers paper, comment and reply, erratum or
Special Issue).
Contact details for submission
Authors should submit their
article via the Elsevier Editorial System (EES), at
http://ees.elsevier.com/epsl. Use the following guidelines to prepare
your article. Via the homepage of this journal (
http://www.elsevier.com/journals) you will be guided stepwise through the
creation and uploading of the various files. For any further information please contact the Author Support Department at
authorsupport@elsevier.com.
Page charges
This journal has no page charges.
Ethics in publishing
For information on Ethics in publishing and Ethical
guidelines for journal publication see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Policy and ethics
The work described in your article must have been carried out in accordance with
The
Code of Ethics of the World Medical Association (Declaration of Helsinki) for experiments involving humans http://www.wma.net/en/30publications/10policies/b3/index.html;
EU Directive 2010/63/EU for animal experiments http://ec.europa.eu/environment/chemicals/lab_animals/legislation_en.htm;
Uniform Requirements for manuscripts submitted to Biomedical journals http://www.icmje.org. This must be stated
at an appropriate point in the article.
Conflict ofiInterest
Authors are
expected to select an Editor and suggest reviewers with an area of expertise appropriate to the manuscript's content and with whom they
or any of the co-authors have no conflict of interest. Conflicts of interest with Editors and reviewers include, but are not restricted
to: being employed at the same institution; being a current or recent thesis advisor, student, or post-doctoral scholar; being a current
or recent co-author or collaborator; or having business or financial relationships. Any such relationship that ended more than 3 years
ago will not be considered a potential source of conflict.
To download a PDF file outlining Elsevier general policy see Conflicts
of Interest (
http://www.elsevier.com/framework_editors/PERK/PDFs/General/Documents/Conflicts_of_Interest.pdf)
If you
have any questions about whether you have a conflict of interest with a particular editor or reviewer you are suggesting, please bring
this to the attention of the editor at the initial submission stage.
All authors are requested to disclose any actual or potential
conflict of interest including any financial, personal or other relationships with other people or organizations within three years of
beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration and verification
Submission of an article implies that the work described
has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is
not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible
authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or
in any other language, including electronically without the written consent of the copyright-holder. To verify originality, your article
may be checked by the originality detection software iThenticate. See also
http://www.elsevier.com/editors/plagdetect.
Data policy
Data Access
All data discussed in the text and presented in figures must either be
presented in tabulated form in the paper or its supplemental files; be contained in cited, readily available, persistent sources; or
be available in an accessible, persistent depository such as a public database or data archive, if it exists for the specific data type.
For appropriate types of data, making the data available in a format that can be downloaded into a spreadsheet from the supplemental
files is recommended even if a similar table is presented in text form in the main text.
For chemical abundance data, elemental or
oxide abundance data must be given unless a compelling reason exists why this is not possible. Derivative chemical parameters such as
elemental abundance ratios or abundances normalized to some other parameter may be listed only in addition to the primary abundance data.
Data
Quality Information
Authors must provide sufficient information (metadata) about the analytical process and reproducibility of
measurements in order that the data quality can be evaluated. Correction procedures must be clearly presented.
For each measured
chemical parameter, the analytical technique (e.g. ICPMS, XRF, EMP) and the laboratory where the measurement was performed should be
provided, if possible in tabular format. If a parameter has been analyzed by more than one method or in more than one lab, each method
must be documented separately. Analytical accuracy and reproducibility should be reported by providing name(s) and measured value(s)
of internationally recognized reference samples measured as unknown samples with the estimated uncertainty of the reference standard
measurement and the number of measurements.
Sample Information
Essential metadata about natural samples must be provided
in order to allow for identification of their origin and type, and to trace their analytical history.
All natural samples for which
data are reported require, if applicable, information about the sample location, including latitude and longitude (if these are unknown,
coordinates obtained by using Google Earth would suffice); depth below sea level (for marine samples); position within a stratigraphic
section or within a core (if applicable). Samples from scientific ocean drilling programs should include complete sample identifiers
(e.g. leg, site/hole, core, section, interval) in the data tables. Samples should be classified (e.g. lithology for rocks and sediments,
species for minerals and fossils, age). Samples for which previously published data exist should be referred to by the previously used
identifiers or, if new sample identifiers are given, cross-referenced to the original identifiers.
Citing Published Data
When citing published data, or showing compilations of published data in figures, sources must be explicitly provided. On-line geochemical
databases such as PetDB or GEOROC give full source references as part of their routine output. Because journal formats commonly limit
the number references that can be listed in the main body of a publication, additional data sources should be explicitly listed in on-line
electronic supplementary form. It is not sufficient to say: "Data shown were taken from PetDB or GEOROC."
Contributors
Each author is required to declare his or her individual contribution to the article: all authors
must have materially participated in the research and/or article preparation, so roles for all authors should be described. The statement
that all authors have approved the final article should be true and included in the disclosure.
Authorship
All authors should have made substantial contributions to all of the following: (1) the conception and design
of the study, or acquisition of data, or analysis and interpretation of data, (2) drafting the article or revising it critically for
important intellectual content, (3) final approval of the version to be submitted.
Changes
to authorship
This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted
manuscripts:
Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange
the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a)
the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from
all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes
confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the
Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform
the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship
has been agreed.
After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange
author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement'
(for more information on this and copyright see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure
the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript
together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce
tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of
the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations
and translations (please consult
http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included,
the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted
forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the
funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation
of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation
of data; in the writing of the report; and in the decision to submit the article for publication. If the funding source(s) had no such
involvement then this should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose
articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This journal offers you the option of making your article freely available to all via the ScienceDirect
platform. To prevent any conflict of interest, you can only make this choice after receiving notification that your article has been
accepted for publication. The fee of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions
and funding bodies have entered into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements
are available at
http://www.elsevier.com/fundingbodies. Authors of accepted articles, who wish to take advantage of this
option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf). Whatever
access option you choose, you retain many rights as an author, including the right to post a revised personal version of your article
on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://webshop.elsevier.com/languageservices
or our customer support site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally
online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files
to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are
converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All
correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for
a paper trail.
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor used.
The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed
and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words.
However, do use bold face, italics, subscripts, superscripts etc. When preparing tables, if you are using a table grid, use only one
grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic
text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication).
Note that source files of figures, tables and text graphics will be required whether or not you embed your figures in the text. See also
the section on Electronic artwork.
To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check'
functions of your wordprocessor.
LaTeX
If the LaTeX file is suitable,
proofs will be produced without rekeying the text. The article should preferably be written using Elsevier's document class 'elsarticle',
or alternatively any of the other recognized classes and formats supported in Elsevier's electronic submissions system, for further information
see
http://www.elsevier.com/wps/find/authorsview.authors/latex-ees-supported.
The Elsevier 'elsarticle' LaTeX style
file package (including detailed instructions for LaTeX preparation) can be obtained from the Quickguide:
http://www.elsevier.com/latex.
It consists of the file: elsarticle.cls, complete user documentation for the class file, bibliographic style files in various styles,
and template files for a quick start.
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections
should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also
for internal cross-referencing: do not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear
on its own separate line.
Introduction
State the objectives of the
work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already
published should be indicated by a reference: only relevant modifications should be described.
Experimental
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated
by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation
for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often
appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of
a Discussion or Results and Discussion section.
Appendices
If there
is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering:
Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
Essential title page information
•
Title.
Concise and informative. Titles are often
used in information-retrieval systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses
(where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the
author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name
and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle
correspondence at all stages of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers (with country
and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date
by the corresponding author.
•
Present/permanent address.
If an author has moved since the work described
in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to
that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript
Arabic numerals are used for such footnotes.
Abstract
A concise and factual
abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An
abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided,
but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential
they must be defined at their first mention in the abstract itself.
Graphical abstract
A Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture
the attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical
abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum
of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 × 13 cm using a regular
screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. See
http://www.elsevier.com/graphicalabstracts
for examples.
Authors can make use of Elsevier's Illustration and Enhancement service to ensure the best presentation of their images
also in accordance with all technical requirements:
Illustration
Service.
Highlights
Highlights are mandatory for this journal.
They consist of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate
file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters,
including spaces, per bullet point). See
http://www.elsevier.com/highlights for examples.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding
general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly
established in the field may be eligible. These keywords will be used for indexing purposes.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first page of
the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the
footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include
them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g.,
providing language help, writing assistance or proof reading the article, etc.).
Math
formulae
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal
line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently
denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the
text).
Footnotes
Footnotes should be used sparingly. Number them consecutively
throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be
used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at
the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a
table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing
of your original artwork.
• Save text in illustrations as 'graphics' or enclose the font.
• Only use the following
fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
•
Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide
on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged
to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application
used, when your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats (note the resolution
requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save
the text as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line
drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is'.
Please
do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low;
•
Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office
files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure,
at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed version.
For color reproduction in print, you will receive information
regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or
on the Web only. For further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version
should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached
to the figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep
text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the
table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that
the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference
cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full.
Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these
references are included in the reference list they should follow the standard reference style of the journal and should include a substitution
of the publication date with either 'Unpublished results' or 'Personal communication'. Citation of a reference as 'in press' implies
that the item has been accepted for publication.
Web references
As
a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author
names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the
reference list) under a different heading if desired, or can be included in the reference list.
Reference style
Text: All citations in the text should refer to:
1.
Single author: the author's
name (without initials, unless there is ambiguity) and the year of publication;
2.
Two authors: both authors' names and
the year of publication;
3.
Three or more authors: first author's name followed by 'et al.' and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed first alphabetically, then chronologically.
Examples: 'as demonstrated (Allan, 2000a, 2000b, 1999; Allan and Jones, 1999). Kramer et al. (2010) have recently shown ....'
List:
References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from
the same author(s) in the same year must be identified by the letters 'a', 'b', 'c', etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2010. The art of writing a scientific article.
J. Sci. Commun. 163, 51–59.
Reference to a book:
Strunk Jr., W., White, E.B., 2000. The Elements of Style, fourth ed. Longman,
New York.
Reference to a chapter in an edited book:
Mettam, G.R., Adams, L.B., 2009. How to prepare an electronic version of
your article, in: Jones, B.S., Smith , R.Z. (Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281–304.
Journal abbreviations source
Journal names should be abbreviated according to
Index Medicus journal
abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Video
data
Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who
have video or animation files that they wish to submit with their article are strongly encouraged to include these within the body of
the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body
text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content.
In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file
formats with a preferred maximum size of 50 MB. Video and animation files supplied will be published online in the electronic version
of your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. Please supply 'stills'
with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard
icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at
http://www.elsevier.com/artworkinstructions.
Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and
the print version for the portions of the article that refer to this content.
Database
Linking
Electronic archiving of supplementary data enables readers to replicate, verify and build upon the conclusions published
in the paper. We recommend that data should be deposited in the data library PANGAEA (
www.pangaea.de). Data is archived
by an editor in standard format, machine readable form and is available Open Access. After processing, the author receives an identifier
(DOI) linking to the supplement for proof reading. Data can be referenced in the publication to facilitate linking between the journal
article and the data. Please use PANGAEA's web interface to submit your data (
http://www.pangaea.de/submit/).
Linking to and depositing data at PANGAEA
Electronic archiving of supplementary data enables readers to
replicate, verify and build upon the conclusions published in your paper. We recommend that data should be deposited in the data library
PANGAEA (
http://www.pangaea.de). Data are quality controlled and archived by an editor in standard machine-readable formats
and are available via Open Access. After processing, the author receives an identifier (DOI) linking to the supplements for checking.
As your data sets will be citable you might want to refer to them in your article. In any case, data supplements and the article will
be automatically linked as in the following example:
doi:10.1016/0016-7037(95)00105-9.
Please use PANGAEA's web interface to submit your data (
http://www.pangaea.de/submit/).
Google Maps and KML files
KML (Keyhole Markup Language) files (optional): You can enrich your online articles
by providing KML files which will be visualized using Google maps. The KML files can be uploaded in our online submission system. KML
is an XML schema for expressing geographic annotation and visualization within Internet-based Earth browsers. Elsevier will generate
Google Maps from the submitted KML files and include these in the article when published online. Submitted KML files will also be available
for downloading from your online article on ScienceDirect. For more information see
http://www.elsevier.com/googlemaps.
Submission checklist
The following list will be useful during the final checking of an article prior to
sending it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following
items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded, and contain:
•
Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
•
Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
•
All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use
of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color
reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white
in print
• If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at
http://support.elsevier.com.
Paper length
EPSL has a restricted
article length of not more than 6500 words in the main text, excluding the abstract, figure captions and references,and a total number
of figures and tables not to exceed 10 (where both are counted together). Large tables should be submitted as part of Supplementary Material.
Comment and reply submissions should be short, concise and not exceeding 2000 words, with no more than 1 figure and 10 references. Excessive
use of multi-part figures is not permitted and the editor will make a decision on the suitability of such submissions. Additional figures
can be included as part of Supplementary Material which would form part of the electronic version of the paper.
Use of the Digital Object Identifier
The
Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character
string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore,
it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic
information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters
B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, the DOIs are
guaranteed never to change.
Proofs
One set of page proofs (as PDF files)
will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a
link will be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs
which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from
http://get.adobe.com/reader.
Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the
Adobe site:
http://www.adobe.com/products/reader/tech-specs.html.
If you do not wish to use the PDF annotations function,
you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections
quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to
the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for
checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as
accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get
your article published quickly and accurately – please let us have all your corrections within 48 hours. It is important to ensure
that all corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent
corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of
your article if no response is received.
Offprints
The corresponding author,
at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via the offprint
order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published article
and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
For inquiries relating to the submission of articles (including electronic submission)
please visit this journal's homepage. Contact details for questions arising after acceptance of an article, especially those relating
to proofs, will be provided by the publisher. You can track accepted articles at
http://www.elsevier.com/trackarticle. You
can also check our Author FAQs (
http://www.elsevier.com/authorFAQ) and/or contact Customer Support via
http://support.elsevier.com.
