 |
|
| BIAXIAL/MULTIAXIAL FATIGUE AND FRACTURE, 31
| |
| | |
|
|
To order this title, and for more information, click here
Edited By
Andrea Carpinteri, University of Parma, Department of Civil Engineering, Parma, Italy
Manuel De Freitas, Instituto Superior Tecnico, Department of Mechanical Engineering, Lisbon, Portugal
Andrea Spagnoli, University of Parma, Department of Civil Engineering, Parma, Italy
Included in series
European Structural Integrity Society, 31
Description
The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to
compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial
Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon,
Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the
Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity
Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental
aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections;
Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches,
Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures
in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One
of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and
fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the
result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Audience
For engineers, industry experts, research scientists, from both a fundamental scientific and technological standpoint.
Contents
Preface
1. Multiaxial Fatigue of Welded Structures
Assessment of Welded Structures by a Structural Multiaxial Fatigue Approach 3
(K. Dang Van, A. Bignonnet , J.L. Fayard)
Evaluation of Fatigue of Fillet Welded Joints in Vehicle Components under Multiaxial
Service
Loads 23
(G. Savaidis, A. Savaidis, R. Schliebner, M. Vormwald)
Multiaxial Fatigue Assessment of Welded Structures by Local Approach
43
(F.Labesse-Jied, B. Lebrun, E. Petitpas, J.L. Robert)
Micro-Crack Growth Behavior in Weldments of a Nickel-Base Superalloy under
Biaxial
Low-Cycle Fatigue at High Temperature 63
(N. Isobe, S. Sakurai)
2. High Cycle Multiaxial Fatigue
Multiaxial Fatigue Life
Estimations for 6082-T6 Cylindrical Specimens Under In-Phase
and Out-of-Phase Biaxial Loadings 83
(L. Susmel, N. Petrone)
Long-Life
Multiaxial Fatigue of a Nodular Graphite Cast Iron 105
(G.B. Marquis, P. Karjalainen-Roikonen)
The Influence of Static Mean Stresses
Applied Normal to the Maximum Shear Planes
in Multiaxial Fatigue 123
(R. P. Kaufman, T. H. Topper)
3. Non-Proportional and Variable-Amplitude
Loading
Fatigue Limit of Ductile Metals under Multiaxial Loading 147
(J. Liu, H. Zenner)
Sequenced Axial and Torsional Cumulative
Fatigue: Low Amplitude Followed by High
Amplitude Loading 165
(P. Bonacuse, S. Kalluri)
Estimation of the Fatigue Life of High Strength
Steel under Variable-Amplitude Tension
with Torsion: Use of the Energy Parameter in the Critical Plane 183
(T. Lagoda, E. Macha, A. Nieslony,
F. Morel)
Critical Plane-Energy Based Approach for Assessment of Biaxial Fatigue Damage
where the Stress-Time Axes are at Different
Frequencies 203
(A. Varvani-Farahani)
Fatigue Analysis of Multiaxially Loaded Components with the FE-Postprocessor
FEMFAT-MAX 223
(C.
Gaier, H. Dannbauer)
4. Defects, Notches, Crack Growth
The Multiaxial Fatigue Strength of Specimens Containing Small Defects 243
(M. Endo)
An Analysis of Elasto-Plastic Strains and Stresses in Notched Bodies Subjected to
Cyclic Non-Proportional Loading Paths 265
(A. Buczynski, G. Glinka)
The Background of Fatigue Limit Ratio of Torsional Fatigue to Rotating Bending
Fatigue in Isotropic Materials
and Materials with Clear-Banded Structure 285
(T. Fukuda, H. Nisitani)
Influence of Defects on Fatigue Life of Aluminium Pressure Diecastings
303
(F.J. Lino, R. J. Neto, A. Oliveira , F.M.F. de Oliveira)
Variability in Fatigue Lives: an Effect of the Elastic Anisotropy of Grains?
321
(S. Pommier)
Three-Dimensional Crack Growth: Numerical Evaluations and Experimental Tests 341
(C. Cali, R. Citarella, M. Perrella)
The Environment Effect on Fatigue Crack Growth Rates in 7049 Aluminium Alloy
at Different Load Ratios 361
(M. Fonte, S. E. Stanzl-Tschegg,
B. Holper, E. Tschegg, A. Vasudevan)
5. Low Cycle Multiaxial Fatigue
A Multiaxial Fatigue Life Criterion for Non-Symmetrical and
Non-Proportional Elasto-
Plastic Deformation 383
(M. Filippini, S. Foletti, I. V. Papadopoulos, C.M. Sonsino)
Cyclic Behaviour of a
Duplex Stainless Steel under Multiaxial Loading: Experiments
and Modelling 401
(V. Aubin, P. Quaegebeur, S. Degallaix)
A Damage Model
for Estimating Low Cycle Fatigue Lives Under Nonproportional
Multiaxial Loading 423
(T. Itoh, T. Miyazaki)
Microcrack Propagation under
Non-Proportional Multiaxial Alternating Loading 441
(M. Weick, J. Aktaa)
6. Applications and Testing Methods
Fatigue Assessment
of Mechanical Components Under Complex Multiaxial Loading
(J. L. T. Santos, M. de Freitas, B. Li , T.P. Trigo) 463
Geometry Variation
and Life Estimates of Biaxial Fatigue Specimens 483
(G. Shatil, N. Ersoy)
| Bibliographic details |
Hardbound, 516 pages, publication date: MAR-2003
ISBN-13: 978-0-08-044129-0
ISBN-10: 0-08-044129-7
Imprint: ELSEVIER
|
| Price and Ordering |
Price:
USD 221
GBP 133.99
EUR 157.95
|  |
Books and book related electronic products are priced in US dollars (USD), euro (EUR), and Great Britain Pounds (GBP). USD prices apply to the Americas and Asia Pacific. EUR prices apply in Europe and the Middle East. GBP prices apply to the UK and all other countries.
|
See also information about conditions of sale & ordering procedures, and links to our regional sales offices.
|
034/312
Last update: 4 Sep 2009
|
|
| |
| | |
|
|
| |
Home | Elsevier Sites | Privacy Policy | Terms and Conditions | Feedback | Site Map | A Reed Elsevier Company