Secure CheckoutPersonal information is secured with SSL technology.
Free ShippingFree global shipping
No minimum order.
Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today’s subsea technology.
- Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies
- Learn and review the applicable standards and specifications from API and ISO in one convenient location
- Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Offshore engineers; subsea engineers; researchers in subsea systems
- Introduction to subsea sector of oil and gas industry
2. Subsea valves and actuators standards
3. Subsea ball valves
4. Subsea gate valves
5. Subsea check valves
6. Subsea choke valves
7. Safety valves
8. Flow control valves
9. Remote operated vehicle (ROV) valve operation
10. Subsea actuators
11. Compensation system
12. Material selection and corrosion
13. Valves and actuators sealing
15. High integrity pressure protection system (HIPPS)
- No. of pages:
- © Gulf Professional Publishing 2021
- 1st June 2021
- Gulf Professional Publishing
- Paperback ISBN:
Karan Sotoodeh is currently a Senior / Lead Engineer in valves and actuators for Baker Hughes, one of the world’s largest oil field services company. He is responsible for engineering and delivering valves and actuators in subsea manifolds, Preparing engineering documents and working with valve suppliers , R&D activities, and maintaining the company’s valve database. He previously worked for AkerSolutions, NLI Engineering, and Nargan Engineers as a senior specialist in piping and valves, assisting with many projects around the world. He has authored many articles and is currently writing articles for Valve World magazine. Karan earned a master of research in mechanical engineering and a masters in oil and gas engineering, both from Robert Gordon University of Aberdeen, and a bachelors in industrial engineering from the Iran University of Science and Technology.
Senior Lead Engineer, Valves and Actuators, Valve Engineering Group, Manifold department, Baker Hughes, Oslo, Norway
Elsevier.com visitor survey
We are always looking for ways to improve customer experience on Elsevier.com.
We would like to ask you for a moment of your time to fill in a short questionnaire, at the end of your visit.
If you decide to participate, a new browser tab will open so you can complete the survey after you have completed your visit to this website.
Thanks in advance for your time.