Secure CheckoutPersonal information is secured with SSL technology.
Free ShippingFree global shipping
No minimum order.
Process Safety Calculations is an essential guide for process safety engineers involved in calculating and predicting risks and consequences. The book focuses on calculation procedures based on basic chemistry, thermodynamics, fluid dynamics, conservation equations, kinetics and practical models. This book provides helpful calculations to demonstrate compliance with regulations and standards. Standards such as Seveso directive(s)/COMAH, CLP regulation, ATEX directives, PED directives, REACH regulation, OSHA/NIOSH and UK ALARP are covered, along with risk and consequence assessment, stoichiometry, thermodynamics, stress analysis and fluid-dynamics.
- Includes realistic engineering models with validation from CFD modeling and/or industry testing
- Provides an introduction into basic principles that govern process relationships in modern industry
- Helps the reader find and apply the right principles to the specific problem being solved, mitigated or validated
Process safety engineers, Process engineers, Chemical Engineers, Environmental engineers, Industrial engineers, Students, Governmental agency (OSHA, HSE, CSB, etc.) employees. Of interest to the following sectors: Oil and gas, Petrochemical industry, Power generation, Basic/fine chemistry, Pharmaceutical industry
PART 1: FUNDAMENTALS
1. Chemistry of Process Safety
2. Thermodynamics and Thermochemistry of Process Safety
3. Reaction Engineering for Process Safety
4. Fluid-Dynamics for Process Safety
5. Loads and Stress Analysis for Process Safety
6. Statistics and Reliability for Process Safety
PART 2: CONSEQUENCE ASSESSMENT
7. Source Models
8. Dispersion Models
11. Dust Explosions
PART 3: QUANTITATIVE RISK ASSESSMENT
12. Quantitative Risk Assessment
- No. of pages:
- © Elsevier 2018
- 31st October 2017
- Paperback ISBN:
- eBook ISBN:
Renato Benintendi Msc CEng FIChemE is Senior Researcher at Chemical Physical Department ULB University, Brussels and Process Safety and Loss Prevention Principal Consultant at Wood (Formerly Foster Wheeler), Reading Office. He authored more than 40 publications on international journals, is tutoring and mentoring dissertations in several universities in the UK, France, and Italy. He has 35 years’ experience in process engineering, process safety engineering, environmental engineering, asset integrity management, is lecturing and delivering conference papers in USA, Asia, Europe, and is the author of research programs in process safety and environmental engineering. His specialties encompass process safety, safety modelling, HSE international regulation expertise, environmental engineering, process engineering, and unit operation engineering.
Senior Researcher, Chemical Physical Department ULB University, Brussels; Process Safety and Loss Prevention Principal Consultant,Wood (Formerly Foster Wheeler), Reading Office
Elsevier.com visitor survey
We are always looking for ways to improve customer experience on Elsevier.com.
We would like to ask you for a moment of your time to fill in a short questionnaire, at the end of your visit.
If you decide to participate, a new browser tab will open so you can complete the survey after you have completed your visit to this website.
Thanks in advance for your time.