Cyclic Deformation and Fatigue of Metals
Free Global ShippingNo minimum order
An integral review is given in this book on the fatigue phenomenon covering the fundamentals of fatigue damage initiation, relevant factors influencing fatigue crack propagation and fatigue life, random load analysis, and simulation for theoretical and experimental fatigue life assessment. The entire chain of problems related to fatigue of metals and structural components is covered. Specifically, it describes the low-cycle plastic properties and statistically interprets the material stress reaction, examining original results of investigations on inelastic deformations under high cycle cyclic loading and correlating them with a number of use parameters. The limit states of bodies with primary defects and their resistance to fatigue crack propagation are discussed. Measurements, analysis and real-time modelling of operating loads for experimental fatigue life verification are reviewed as well as introducing some new fatigue damage accumulation hypotheses based on dissipated energy. Various operating and environmental factors of the fatigue life are analyzed, including temperature, metal structures, corrosive environment, stress-strain amplitudes and their changes, random load (strain) properties, stress gradient frequency, mean level, etc. The work is intended for all those involved in research and development in the metal, machine and structure fields.
Table of Contents
- 1. General Features of the Fatigue Process (M. Klesnil et al.). Cyclic hardening/softening process. Nucleation of cracks. Fatigue crack propagation. 2. Low-Cycle Fatigue (M. Klesnil et al.). Cyclic plasticity. Hysteresis loop. Variable amplitudes. Stress and strain concentration in a notch. Effect of service factors. Fatigue life. References. 3. High-Cycle Fatigue (V.T. Troshchenko et al.). Basic information about inelasticity of metals. Mechanism of inelastic deformation of metals. Some laws of inelastic deformation and fatigue damage. Strain and energy criteria of fatigue damage of metals. Accelerated method of fatigue limit determination. References. 4. Resistance to Fatigue Crack Propagation (V.T. Troshchenko et al.). Strength of cyclically loaded components with cracks. Resistance of components to cracks, effect of service factors. References. 5. Operating Fatigue Life (M. Bílý et al.). Operating loads. Modelling of operating processes. Calculation of operating fatigue endurance using material cyclic stress-strain properties. References. Conclusions. Subject index.
- Language: English
- Copyright: © Elsevier Science 1993
- Published: March 11, 1993
- Imprint: Elsevier Science
- eBook ISBN: 9781483291710
About the Editor
Affiliations and Expertise
Ratings and Reviews
There are currently no reviews for "Cyclic Deformation and Fatigue of Metals"