Advances in Thermal Spraying

Advances in Thermal Spraying

Proceedings of the Eleventh International Thermal Spraying Conference, Montreal, Canada September 8-12, 1986

1st Edition - January 1, 1986

Write a review

  • Author: Unknown Author
  • eBook ISBN: 9781483152646

Purchase options

Purchase options
DRM-free (PDF)
Sales tax will be calculated at check-out

Institutional Subscription

Free Global Shipping
No minimum order


Advances in Thermal Spraying contains the proceedings of the Eleventh International Thermal Spraying Conference held in Montreal, Canada, on September 8-12, 1986. The papers explore technological advances in thermal spraying and the related field of surfacing by welding. This book is comprised of 97 chapters divided into 16 sections and begins with a discussion on the applications of thermal spraying in the power generation industry, with emphasis on the use of thermal coatings to protect boilers against corrosion. The following chapters focus on thermal spraying as applied to low-pressure processes; carbide coatings; properties of coatings such as aluminum bronze coatings; and control and automation of the thermal spraying process. The reader is then introduced to ceramic powders and coatings used in thermal spraying; quality assurance of plasma spray powders; and applications of thermal-sprayed coatings to protect against corrosion and wear. The remaining sections consider arc spraying; post-deposition treatment of plasma-sprayed coatings; and miscellaneous applications of thermal spraying, including insulation of diesel engine combustion chambers. This monograph will be of value to materials scientists, metallurgists, mechanical engineers, and those in fields ranging from physics to corrosion science and metallography.

Table of Contents

  • Foreword

    Applications: Power Generation

    A New Coating for Corrosion Protection in Boilers

    Thermal Coating as Corrosion Protection in Boilers

    The Application of Plasma Sprayed Coatings for the Protection

    Cavitation-Erosion of Plasma-Sprayed WC/Co

    Low Pressure Processes

    Spray Particle Behavior in a Low-Pressure Plasma Jet

    Development and Manufacture of Electrolyzer Components -- Applying Plasma Spraying under Reduced Pressure

    Vacuum Plasma Sprayed Composite Coatings

    Low Pressure Arc Spraying in Comparison with Low-Pressure Plasma Spraying

    Structural and Mechanical Properties of Co-WC, Ni-WC DeposIts Sprayed at 60 Torrs with Ar-He Plasmas at a Power Level of 48kW

    Carbide Coatings

    Metallurgical Characterization of Plasma Sprayed WC-Co Coatings

    Structure de Revetements de Carbure de Tungstene Obtenus par Differents Procedes de Projection

    Microstructure and Bond Strength of WC-Co Coatings Deposited by Hypersonic Flame Spraying (JET KOTE Process)

    Chemical Behavior of TiC during Plasma Spraying

    Air Plasma Sprayed Coatings of a New Type of H-Phase Containing Hard Alloys

    Properties of Coatings

    Determination of Material Properties of Ceramic Coatings

    Structure of Flame-Sprayed Layers from A1 + Cr2O3 Cored Wire

    An Investigation of the Self-Bonding Mechanism of Aluminum Bronze Coatings Sprayed by the Electric Arc Process

    Structure and Wear Characteristics of Composite Coating Deposited by Wire Explosion Spraying

    Process Control and Automation

    Coating Properties and Characteristics Optimization of the Operation of a Plasma Generator for Thermal Spraying

    Automation of the Thermal Spray Process

    Application of Completely Computer-Controlled Spray Systems to Increase the Quality of Low Pressure Plasma Sprayed Coatings

    Rapid Optimization of Spraying Parameters by Means of an Automated Laser Doppler Measuring Equipment

    Mathematical Model of Plasma Spray Coating of a Roller Directly Controlled with an Electronic Computer

    Ceramic Powders and Coatings

    Spherical Ceramic Powders for Thermal Spraying

    The Influence of the Powder Characteristics of Zirconia on the Spraying Process

    Influence of Different Plasma Spray Processes and Various Types of Stabilized Zirconia on the Morphology of Thermal Barrier Coating

    Thermophysical Properties of Zirconia Coatings Stabilized with Calcia or Yttria: Influence of Spraying Parameters and Heat Treatment

    Plasma Spray Powder for Thermal Barrier Coatings

    Quality Assurance

    Quality Assurance of Plasma Spray Powders

    The Effect of Powder Size and Plasma Process Enthalpy on Rene 80 Deposit Properties

    Infrared Thermal Wave Non-destructive Evaluation of Thermal Sprayed Coatings

    A Study of the Relationships Between the Power Input and the Depositing Efficiency as Well as the Bonding Strength of the Plasma Spray of Ni- and Fe- Base Powdered Alloys

    Transition Metal-Nonmetallic Refractory Compound Composite Powders for Thermal Spraying

    Applications: Corrosion and Wear

    Metal Powder Developments for Thermal-Sprayed Wear Resistant Protective Coatings

    Development of Ceramic Plasma Sprayed Coatings Against Slag Attack for the Steel Industry

    A Case Study on the Use of Plasma Sprayed Oxide Ceramic Coatings in Hot Extrusion Dies for Non-Ferrous Metals

    Protection against Wear by Powder Flame Spraying

    New Plasma Processes

    Influence of the Percentage of Hydrogen and of the Size and Injection Velocity Distributions on the Momentum and Heat Transfer Between Plasma Jet and Ceramic Powders during Plasma Spraying Process

    Effets des Parametres de Projection par Plasma sur L'efficacite de Deposition et L'adherence des Revetements de Cr2O3

    New Plasma Spraying System without Tremendous Noises and Intense Rays

    Plasma Spraying in the Gas-Air Mixtures

    Mechanical Properties

    Influence of Sprayed Metal Coatings on the Behavior of Components under Dynamic Loading

    On Microstructure and Properties of Plasma-Sprayed WSi2-Coatings

    Relation entre L'etat Amorphe D'un Alliage et L'ammelioration de la Resistance a L'usure Abrasive

    Plasma Coated Metal-Zirconia Interface

    Arc Spraying

    Arc Spraying of Steel and Cored Wires

    Some Properties of Coatings Arc-Sprayed in Nitrogen or Argon Atmosphere

    The Use of a Computer Model of the Metal Arc Spray Process to Produce Coating Properties

    Dynamic Behavior of High Energy Thermal Spraying

    The Development of a Hybrid Spraying Process

    Miscellaneous Applications

    Plasma-Sprayed Insulated Metal Substrates

    Diesel Engine Combustion Chamber Insulation by Ceramic Plasma Spraying

    Cavitational Erosion Behavior of Several Thermally Sprayed Coatings

    Plasma Sprayed Coating Materials

    Post Deposition Treatment

    The Finish Machining of Sprayed Metal Coatings

    Laser Processing of Thermally Sprayed Coatings

    Laser Treatment of Plasma-Sprayed Ceramic Coatings

    Laser Treatment of Plasma Sprayed Zirconium Silicate Coatings

    Influence of Tightening Means on Structure and Some Properties of Plasma Sprayed Coatings

    Miscellaneous Properties

    Discrimination of Micro- and Macrocracking Processes in Plasma-Sprayed Ceramic Coatings

    Study on Damping for Aluminum and Zinc Spray DeposIts

    X-ray Stress Measurement of Thermal Sprayed Coatings at Elevated Temperatures

    Electrical Properties of Plasma Sprayed Silicon

    Kinetic Microhardness of Coatings Produced by D-Gun Spraying

    Surfacing by Welding

    The Role of Carbides in Iron Base Hardsurfacing DeposIts

    Hard Surfacing with Refractory Carbide Containing Cored Wires

    Optimization of Wear Resistant Iron-Chromium-Silicon-Carbon

    Protection Against Wear by Surfacing with Welding Pastes

    Strip Overlay Increases Caster Roll Service Life

    Surfacing of Metallurgical Rolls

    Choosing the Best Surfacing Method for Tampella PGW Feeding Lock Slides

    The Formation Mechanism of Plasma Spray welding Overlay and Its Characteristic Zones

    A Study on Plasma Arc Spray-Welding of the Exhaust Valve Sealing Face

    Parametric Study of Plasma Transferred Arc Surfacing

    Applications of Lasers in Surfacing and Surface Modification

    Micro-beam Plasma Arc Powder Surfacing

    Effect of Plasma Spray-Welding Technology on Dilution

    Poster Session

    Design and Research of Equivalent Wear Surfacing by Coating

    Newly Developed Arc Spraying Gun

    L'evolution des Poudres pour la Projection a Chaud

    The Oxidation during Electric Arc Spraying and Its Control

    Fabrication des Arbres a Cames pour Moteurs a Combustion Interne

    Development of Hybrid Acoustic Diaphragm by Plasma Spraying

    Results of Heat Cycle Test (from -45c to +60c, 240 cycles) of Sprayed Coatings of Zinc, Zinc-Aluminum Alloy and Aluminum

    Studies on WC-Co System Coatings by High Energy Thermal Spraying

    High Efficiency Plasma Spray Process for Alumina Coatings

    Clinical Cases of the Artificial Root of Teeth Applying Plasma-Coating

    Evaluation of Cohesion Strength of Sprayed Metal Surfaces through a Simple Modification in the Shear Bond Test

    Residual Stresses Measurements of Plasma Sprayed Coatings

    The Oxide Reduction in the Plasma Sprayed Ni-Al Layers

    Problems in Particle Size Analysis Using LASER Diffraction Equipment

    Investigations about the Machinability of Arc-Sprayed Steel Coatings

    Properties and Characterization of Coatings Made Using Jet Kote Thermal Spray Technique

    Some Properties of Thermally Sprayed Coatings from Low Melting Alloys

    Spraying Behavior of Ni-Al Composite Wire

    Diffusion Tests with Plasma Sprayed Coatings

    Appropriate Automation in the Metal Spraying Industry

    Author Index

    Subject Index

Product details

  • No. of pages: 936
  • Language: English
  • Copyright: © Pergamon 1986
  • Published: January 1, 1986
  • Imprint: Pergamon
  • eBook ISBN: 9781483152646

About the Author

Unknown Author

Dr. Sam Stuart is a physiotherapist and a research Fellow within the Balance Disorders Laboratory, OHSU. His work focuses on vision, cognition and gait in neurological disorders, examining how technology-based interventions influence these factors. He has published extensively in world leading clinical and engineering journals focusing on a broad range of activities such as real-world data analytics, algorithm development for wearable technology and provided expert opinion on technology for concussion assessment for robust player management. He is currently a guest editor for special issues (sports medicine and transcranial direct current stimulation for motor rehabilitation) within Physiological Measurement and Journal of NeuroEngineering and Rehabilitation, respectively.

Affiliations and Expertise

Senior Research Fellow, Department of Sport, Exercise and Rehabilitation, Northumbria University, UK Honorary Physiotherapist, Northumbria Healthcare NHS Foundation Trust, North Shields, UK

Ratings and Reviews

Write a review

There are currently no reviews for "Advances in Thermal Spraying"