Secure CheckoutPersonal information is secured with SSL technology.
Free ShippingFree global shipping
No minimum order.
Active Disturbance Rejection Control of Dynamic Systems: A Flatness Based Approach describes the linear control of uncertain nonlinear systems. The net result is a practical controller design that is simple and surprisingly robust, one that also guarantees convergence to small neighborhoods of desired equilibria or tracking errors that are as close to zero as desired.
This methodology differs from current robust feedback controllers characterized by either complex matrix manipulations, complex parameter adaptation schemes and, in other cases, induced high frequency noises through the classical chattering phenomenon.
The approach contains many of the cornerstones, or philosophical features, of Model Free Control and ADRC, while exploiting flatness and GPI control in an efficient manner for linear, nonlinear, mono-variable and multivariable systems, including those exhibiting inputs delays.
The book contains successful experimental laboratory case studies of diverse engineering problems, especially those relating to mechanical, electro-mechanical, robotics, mobile robotics and power electronics systems.
- Provides an alternative way to solve disturbance rejection problems and robust control problem beyond the existing approaches based on matrix algebra and state observers
- Generalizes the widely studied Extended State Observer to a class of observers called Generalized Proportional Integral Observers (GPI Observers)
- Contains successful experimental laboratory case studies
Control engineering professors, Control engineering practitioners, Professionals in the field of Control of Mechatronics systems such as: Robotics, Mobile Robotics, Aerospace Robotics, Mechanical, Electromechanical Systems, Power Electronics Systems
1.1 A Brief Historical Perspective on Active Disturbance Rejection Control
2. Generalities of ADRC
2.2 Main Theoretical Issues
2.3 The Need for Flatness-Based ADRC Designs
2.4 Ultralocal Disturbance Models
3. Merging Flatness, GPI Observation and GPI Control with ADRC
3.2 GPI Extended State Observer Design
3.3 An Observer-Based Approach to GPI Perturbation Rejection
3.4 The Buck Converter
3.5 Example: A Pendulum System
3.6 Two-Link Robot Manipulator
3.7 Nonholonomic Wheeled Car
3.8 Two-Mass Rectilinear Mechanism
4. Extensions of ADRC
4.2 Integral Reconstructors of MIMO Linear Systems
4.3 A Lyapunov Approach for a Class of Nonlinear Multivariable Systems
4.4 Combined Sliding-Mode–ADRC Controllers
4.5 ADRC and Sampled Systems: The Delta Operator Approach
4.6 Control of Time Delay Systems
4.7 Relations With Model-Free Control
4.8 Fractional-Order Systems
5. Case Studies
5.2 A Two-Degree-of-Freedom Robotic Arm
5.3 An Omnidirectional Robot
5.4 A Single-Link Manipulator Driven by a Synchronous Motor
5.5 Nonlinear Pendulum System
5.6 The Thomson Ring
5.7 Trajectory Tracking Control of a Delta Robot
5.8 A Time-Delayed Flywheel System
5.9 Control of Robot Manipulators with Delayed Inputs
6. The Challenging Case of Underactuated Systems
6.2 Controlling the Pendubot via Tangent Linearization
6.3 A Two-Mass Spring System with an Inverted Pendulum
6.4 Double Inverted Pendulum on a Cart
6.5 The Furuta Pendulum
6.6 The Ball-and-Beam System
A. Differential Flatness
A.1 Definition of Flatness
A.2 Illustrative Examples
A.3 About the Advantages and Disadvantages of Flatness
A.4 Differential Flatness and Uncertainty
B. Generalized Proportional Integral Control
B.1 Definitions and Generalities
B.2 Generalized Proportional Integral Control and Classical Compensation Networks
B.3 An Illustrative Application Example
B.4 GPI Control for Discrete-Time Systems
B.5 A General Result for Multivariable Linear Systems
- No. of pages:
- © Butterworth-Heinemann 2017
- 12th May 2017
- Paperback ISBN:
- eBook ISBN:
He obtained his Electrical Engineering degree in 1970 from the University of Los Andes (Merida, Venezuela). He completed his postgraduate studies at the Massachusetts Institute of Technology (Cambridge, Mass. USA) in 1974 where he held together, the titles of Master of Science in Electrical Engineer and Electrical Engineer. In 1977 he received a Doctorate (PhD) in Electrical Engineering from the Institute. Held the posts of Head of Control Systems from 1978 to 1980, the Administrative Vice Chancellor of University of the Andes during the period 1980-1984 and Head of the Graduate Faculty of Automatic Control Engineering 1992-1993.
Senior Researcher at the Centre for Research and Advanced Studies of IPN (CINVESTAV-IPN, Mexico City, DF, Mexico), with the Researcher category 3-E
Alberto Luviano Juárez was born in Mexico City, Mexico, in 1981. He received the B.S. degree in mechatronics engineering from the Instituto Politécnico Nacional, Mexico, in 2003, the M.Sc. degree in automatic control from the Department of Automatic Control, Centro de Investigación y de Estudios Avanzados (CINVESTAV), Instituto Politécnico Nacional (IPN), in 2006, and the Ph.D. degree in electrical engineering from the Mechatronics section, Departament of Electrical Engineering at CINVESTAV, IPN, in 2011.
Since 2011, he has been with the Postgraduate and Research Section at Unidad Profesional Interdisciplinaria en Ingeniería y Tecnologías Avanzadas, IPN. His research interests include robust estimation and control in mechatronic systems, robotics, and algebraic methods in the estimation and control of mechatronic systems. Dr. Alberto Luviano Juárez is the Coordinator of Master's Program in Advanced Technology, since april 2014.
Professor, Instituto Politécnico Nacional, Mexico
M. Ramírez-Neria He received the B.S. degree in Mechatronics Engineering from UPIITA-IPN of the Instituto Politécnico Nacional , Mexico City, Mexico (2008), the M.S. degree in Electrical Engineering from the Mechatronics Section of the Electrical Engineering Department of CINVESTAV-IPN, Mexico City,Mexico (2011), Currently, he is a Ph.D. candidate at Automatic Control Departament of CINVESTAV-IPN. His current research interest are applications of control theory, active disturbance rejection control, mechanical underactuated systems, robotics and mechatronic systems.
Departamento de Control Automático, Mexico
E.W. Zurita-Bustamante received the B.S.degree in electronic engineering from the Universidad Tecnológica de la Mixteca, Huajuapan de León, Oaxaca, México, in 2007, the M.S degree in Electronic and Computer Science from the Universidad Tecnológica de la Mixteca, Huajuapan de León, Oaxaca, México, in 2010. Currently, he is a Ph.D. student at Electrical Departament of CINVESTAV-IPN. His research interests include development and implementation of hardware architectures on reconfigurable logic for power electronics, automatic control and mechatronic systems.
Departamento de Ingeniería Electrica, Seccion de Mecatronica, Ciudad de Mexico, Mexico