 |
|
| ADVANCES IN ENGINEERING FLUID MECHANICS: MULTIPHASE REACTOR AND POLYMERIZATION SYSTEM HYDR
| |
| | |
|
|
 To order this title, and for more information, click here
By
Nicholas P Cheremisinoff, Consulting Engineer, Nicholas P. Cheremisinoff, Ph.D. (Ch.E.) is an internationally recognized consulting engineer who has conducted hundreds
of pollution prevention audits and environmental catastrophes.
Description
This volume of the Advances in Engineering Fluid Mechanics Series covers topics in hydrodynamics related to polymerization of elastomers
and plastics. Emphasis is given to advanced concepts in multiphase reactor systems often used in the manufacturing of products. This
volume is comprised of 30 chapters that address key subject areas such as multiphase mixing concepts, multicomponet reactors and the
hydrodynamics associated with their operations, and slurry flow behavior associated with non-Newtonian flows.
Contents
CONTRIBUTORS TO THIS VOLUME viii; PREFACE xii; 1. The Viscosity of Liquid Hydrocarbons and their Mixtures 1; S. I. Sandler and H. Orbey
2. Experimental Studies for Characterization of Mixing; Mechanisms 25
J. K. Kim; 3. Physical Modeling of Axial Mixing in Slugging; Gas-Liquid
Columns 49; J. R. F. Guedes de Carvalho, J. B. L M. Campos, and J. A. S. Teixeira
4. Numerical Solution of the Permeation, Sorption,
and Desorption Rate Curves Incorporating the Dual-Mode; Sorption and Transport Model 67; K. Toi
5. Kinematic Viscosity and Viscous Flow
in Binary Mixtures; Containing Ethane-1,2-Diol 79; L. Tassi; 6. Reaction of a Continuous Mixture in a Bubbling
Fluidized Bed 105; N.
R. Amundson and R. Aris; 7. Fluid Dynamics of Coarse Dispersions 119; Y. A. Buyevich and S. K. Kapbasov; 8. Combustion of Single Coal
Particles in Turbulent; Fluidized Beds 167; P. K. Halder; 9. Flow of Solids and Slurries in Rotary Drums 193; H. A. Nasr-EI-Din, A. Afacan,
and J. H. Masliyah; 10. Gas Phase Hydrodynamics in Circulating Fluidized; Bed Risers 255; G. S. Patience, J. Chaouki, and F. Berruti;
11. Boundary Conditions Required for the CFD Simulation; of Flows in Stirred Tanks 297 S. M. Kresta
12. Role of Interfacial Shear Modeling
in Predicting Stability of Stratified Two-Phase Flow 317 N. Brauner and D. M. Maron 13. Water Flow through Helical Coils in Turbulent
Condition 379, S. K. Das. 14. Modeling Coalescence of Bubble Clusters Rising Freely, in Low-Viscosity Liquids 405, C. W. Stewart
15.
Oxygen Transfer in Non-Newtonian Fluids Stirred with a Helical Ribbon Screw Impeller 431, A. Tecante, E. B. de Ia Fuente, L. Choplin,
and
P. A. Tan guy, 16. Modeling of the Hydrodynamic Behavior of Highly
Viscous Fluids in Stirred Tanks Equipped with Two-Blade Impellers
455
C. Xuereb, M. Abid, and J. Bertrand, 17. Non-Newtonian Liquid Flow through Globe and Gate, Valves 487, S. K. Das, 18. Comparison
of Numerical and Experimental Rheological, Data of Homogeneous Non-Newtonian Suspensions 507, V. Nassehi, 19. Concentration Forcing of
Isothermal Plug-Flow Reactors
for Autocatalytic Reactions 525, M. Chidambaram, 20. Non-Newtonian Effects in Bubble Columns 539, R. P.
Chhabra, U. K. Ghosh, Y. Kawase, and S. H. Upadhyay, 21. Studies in Supported Titanium Catalyst System using Magnesium Dichloride-Alcohol
Adduct 571, V. K. Gupta, S. Ravindranathan, and M. Ravindranathan, 22. Plasticizing Polyesters of Dimer Acids and 1,4-Butanediol 583,
U. D. N. Bajpai and Nivedita, 23. Viscoelastic Properties of Model Silicone Networks, with Pendant Chains 599, M. A. Villar and E. M.
Va lies, 24. Rheology of Water-Soluble Polymers used for Improved Oil Recovery 615, H. A. Nasr-EI-Din and K. C. Taylor, 25. Relation
of Rheological Properties of UV-Cured Films, with Glass Transition Temperatures based on Fox Equation 669, M. A. All, M. A. Kahn, K.
M. I. All, 26. Prediction and Calculation of the Shear Creep Behavior, of Amorphous Polymers under Progressive Physical Aging 683, R.
O. E. Greiner and J. Kaschta, 27. Die Extrusion Behavior of Carbon Black-Filled Block, Copolymer Thermoplastic Elastomers 711
J. K. Kim
and M. H. Han, 28. Polysulfides 737, C. P. Tsonis, 29. Properties and Applications of Thermoplastic Polyurethane, Blends 747, M. Yue
and K. S. Chian, INDEX 763
| Bibliographic details |
Hardbound, 772 pages, publication date: AUG-1996
ISBN-13: 978-0-88415-497-6
ISBN-10: 0-88415-497-1
Imprint: GULF PROFESSIONAL PUBLISHING
|
| Price and Ordering |
Price:
EUR 225
GBP 160
USD 260
|  |
Books and book related electronic products are priced in US dollars (USD), euro (EUR), and Great Britain Pounds (GBP). USD prices apply to the Americas and Asia Pacific. EUR prices apply in Europe and the Middle East. GBP prices apply to the UK and all other countries.
|
See also information about conditions of sale & ordering procedures, and links to our regional sales offices.
|
034/308
Last update: 27 Sep 2008
|
|
| |
| | |
|
|
| |
