Guide for Authors
Ethics in publishing
For information on Ethics in publishing and Ethical guidelines for journal publication
see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Policy and ethics
The work described in your article must have been carried out in accordance with
The
Code of Ethics of the World Medical Association (Declaration of Helsinki) for experiments involving humans 
http://www.wma.net/en/30publications/10policies/b3/index.html;
EU Directive 2010/63/EU for animal experiments http://ec.europa.eu/environment/chemicals/lab_animals/legislation_en.htm;
Uniform Requirements for manuscripts submitted to Biomedical journals http://www.icmje.org. This must be stated
at an appropriate point in the article.
Conflict of interest
All authors are requested to
disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations
within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See
also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission
of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published
lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors
and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published
elsewhere including electronically in the same form, in English or in any other language, without the written consent of the copyright-holder.
Contributors
Each author is required to declare his or her individual contribution to the article: all authors
must have materially participated in the research and/or article preparation, so roles for all authors should be described. The statement
that all authors have approved the final article should be true and included in the disclosure.
Changes
to authorship
This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted
manuscripts:
Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange
the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a)
the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from
all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes
confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the
Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform
the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship
has been agreed.
After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange
author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement'
(for more information on this and copyright see
http://www.elsevier.com/copyright). Acceptance of the agreement will ensure
the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript
together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce
tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of
the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations
and translations (please consult
http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included,
the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted
forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained
author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to:
http://www.elsevier.com/authorsrights.
Role of the funding source
You are requested
to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe
the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report;
and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this should be stated.
Please see
http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier
has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply
with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements
and policies please visit
http://www.elsevier.com/fundingbodies.
Open access
This
journal offers you the option of making your article freely available to all via the ScienceDirect platform. To prevent any conflict
of interest, you can only make this choice after receiving notification that your article has been accepted for publication. The fee
of $3,000 excludes taxes and other potential author fees such as color charges. In some cases, institutions and funding bodies have entered
into agreement with Elsevier to meet these fees on behalf of their authors. Details of these agreements are available at
http://www.elsevier.com/fundingbodies.
Authors of accepted articles, who wish to take advantage of this option, should complete and submit the order form (available at
http://www.elsevier.com/locate/openaccessform.pdf).
Whatever access option you choose, you retain many rights as an author, including the right to post a revised personal version of your
article on your own website. More information can be found here:
http://www.elsevier.com/authorsrights.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://webshop.elsevier.com/languageservices
or our customer support site at
http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally online and
you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single
PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted
to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence,
including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Editorial Office, Regional Science and Urban Economics:
rsue.editor@gmail.com
Department of Economics
University of Illinois
1407 W. Gregory
Urbana, IL 61801
USA
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor
used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed
and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words.
However, do use bold face, italics, subscripts, superscripts etc. When preparing tables, if you are using a table grid, use only one
grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic
text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication).
Note that source files of figures, tables and text graphics will be required whether or not you embed your figures in the text. See also
the section on Electronic artwork.
To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check'
functions of your wordprocessor.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly.
Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case
superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each
affiliation, including the country name and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication.
Ensure that telephone
and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact
details must be kept up to date by the corresponding author.
•
Present/permanent address.
If an author has
moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may
be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main,
affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A
concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major
conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References
should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided,
but if essential they must be defined at their first mention in the abstract itself.
Highlights
Highlights
are mandatory for this journal. They consist of a short collection of bullet points that convey the core findings of the article and
should be submitted in a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet
points (maximum 85 characters, including spaces, per bullet point). See
http://www.elsevier.com/highlights for examples.
Classification codes
Please provide up to 6 standard JEL codes. The available codes may be accessed at JEL:
http://www.aeaweb.org/journal/elclasjn.html.
Electronic artwork
General
points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations
as 'graphics' or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
•
Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
•
Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings.
Embed the font or save the text as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel)
then please supply 'as is'.
Please do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT,
WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately
large for the content.
Reference style
Text: All citations in the text should refer
to:
1.
Single author: the author's name (without initials, unless there is ambiguity) and the year of publication;
2.
Two authors: both authors' names and the year of publication;
3.
Three or more authors: first author's name followed
by 'et al.' and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed
first alphabetically, then chronologically.
Examples: 'as demonstrated (Allan, 2000a, 2000b, 1999; Allan and Jones, 1999). Kramer
et al. (2010) have recently shown ....'
List: References should be arranged first alphabetically and then further sorted
chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters 'a',
'b', 'c', etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer,
J., Hanraads, J.A.J., Lupton, R.A., 2010. The art of writing a scientific article. J. Sci. Commun. 163, 51–59.
Reference to
a book:
Strunk Jr., W., White, E.B., 2000. The Elements of Style, fourth ed. Longman, New York.
Reference to a chapter in an
edited book:
Mettam, G.R., Adams, L.B., 2009. How to prepare an electronic version of your article, in: Jones, B.S., Smith , R.Z.
(Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281–304.
Video data
Elsevier
accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files
that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done
in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed.
All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your
video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum
size of 50 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web
products, including ScienceDirect:
http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose
any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the
link to your video data. For more detailed instructions please visit our video instruction pages at
http://www.elsevier.com/artworkinstructions.
Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and
the print version for the portions of the article that refer to this content.
Google Maps and KML files
KML
(Keyhole Markup Language) files (optional): You can enrich your online articles by providing KML files which will be visualized using
Google maps. The KML files can be uploaded in our online submission system. KML is an XML schema for expressing geographic annotation
and visualization within Internet-based Earth browsers. Elsevier will generate Google Maps from the submitted KML files and include these
in the article when published online. Submitted KML files will also be available for downloading from your online article on ScienceDirect.
For more information see
http://www.elsevier.com/googlemaps.
Submission checklist
The
following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this
Guide for Authors for further details of any item.
Ensure that the following items are present:
One author has been designated
as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax
numbers
All necessary files have been uploaded, and contain:
• Keywords
• All figure captions
• All tables
(including title, description, footnotes)
Further considerations
• Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited
in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the
Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print, or
to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required,
black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer
support site at
http://support.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier
(DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned
to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium
for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The
correct format for citing a DOI is shown as follows (example taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail.
For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication.
The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer
outlining the terms and conditions of use.
For inquiries relating to the
submission of articles (including electronic submission) please visit this journal's homepage. Contact details for questions arising
after acceptance of an article, especially those relating to proofs, will be provided by the publisher. You can track accepted articles
at
http://www.elsevier.com/trackarticle. You can also check our Author FAQs (
http://www.elsevier.com/authorFAQ)
and/or contact Customer Support via
http://support.elsevier.com.
