Guide for Authors
The International Journal of Urban Policy and Planning
Cities offers a comprehensive range of articles on all aspects of urban policy. It provides
an international and interdisciplinary platform for the exchange of ideas and information between urban planners and policy makers from
national and local government, non-government organizations, academia and consultancy.
The primary aims of the journal are to analyse
and assess past and present urban development and management as a reflection of effective, ineffective and non-existent planning policies;
and the promotion of the implementation of appropriate urban policies in both the developed and the developing world.
Topics covered
include: housing, homelessness and health; urban management; public-private sector cooperation; Third World development and planning
problems; urban regeneration; urban conservation and design; technological innovation and urban planning; urban transportation.
Each
issue also features a profile of a major city. Coverage includes a brief description of the city's historical development, an account
of contemporary conditions, problems or issues, and a critical review of recent or current policy, planning or management responses.
Types of Contribution
FULL LENGTH ARTICLES
Articles should be 5000-6000 words long, although articles
longer than 6000 words will be accepted on an occasional basis, if the topic demands this length of treatment.
CITY PROFILES
City Profiles are usually 5,000-6,000 words in length. They should make clear at the start why the city is being featured and should
offer a brief description of the city's historical development, an account of contemporary conditions, problems or issues and a critical
review of recent or current policy, planning or management responses.
The following components will normally be required: location
and physical assets/constraints; summary history; demographics; economic, social and environmental conditions and issues; urban form
or design characteristics; political, planning and management structures; recent or current initiatives, successes or failures; future
developments. Profiles often include a section focusing in on a specific area, sector, or other aspect of the city or of its planning
or management. Location and city maps are normally required and photographs are encouraged.
Proposals may be put forward for series
of two or more city profiles linked by a common category, theme or perspective. Linked profile series may be offered by a single contributor,
or by two or more with a coordinating guest editor.
SHORTER ITEMS
The Viewpoint section exists for the expression of opinion, and allows authors to submit material which might not be appropriate for
full-length articles but which contains ideas worthy of publication (2500-5000 words).
Book reviews are welcomed (800-1200 words).
Conference reports (1000-1500 words). Shorter items must be submitted in the same way as major articles via EES clearly marking the
purpose of the submitted article.
Ethics in Publishing
For information on Ethics in Publishing and Ethical guidelines for journal publication
see
http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest
including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted
work that could inappropriately influence, or be perceived to influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously
(except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without
the written consent of the copyright-holder.
Copyright
Upon acceptance
of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright see
http://www.elsevier.com/copyright).
Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding
author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this
agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation
within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other
derivative works, including compilations and translations (please consult
http://www.elsevier.com/permissions). If excerpts
from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s)
in the article. Elsevier has preprinted forms for use by authors in these cases: please consult
http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to:
http://www.elsevier.com/authorsrights.
Role of the
funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation
of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation
of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such
involvement then this should be stated. Please see
http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose
articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit
http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit
http://www.elsevier.com/languagepolishing or our customer support site at
http://epsupport.elsevier.com
for more information. Please note Elsevier neither endorses nor takes responsibility for any products, goods or services offered by outside
vendors through our services or in any advertising. For more information please refer to our Terms & Conditions:
http://www.elsevier.com/termsandconditions.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through
the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is
used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the
review process, these source files are needed for further processing after acceptance. All correspondence, including notification of
the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submission site for
Cities
To submit your paper please click here:
http://ees.elsevier.com/jcit
Use of wordprocessing software
It
is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep
the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular,
do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts
etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables,
if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs,
not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also
the Guide to Publishing with Elsevier:
http://www.elsevier.com/guidepublication). Do not import the figures into the text
file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on
Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions
of your wordprocessor.
Article structure
Subdivision - unnumbered sections
Divide your article into clearly defined sections. Each subsection is given a brief
heading. Each heading should appear on its own separate line. Subsections should be used as much as possible when cross-referencing text:
refer to the subsection by heading as opposed to simply "the text".
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already
published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt with in
the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from
a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined
Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which
may stand alone or form a subsection of a Discussion or Results and Discussion section.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in
appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on.
Essential title page information
•
Title.
Concise and informative. Titles are often
used in information-retrieval systems. Avoid abbreviations and formulae where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses
(where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the
author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name,
and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle
correspondence at all stages of refereeing and publication, also post-publication.
Ensure that telephone and fax numbers (with country
and area code) are provided in addition to the e-mail address and the complete postal address.
•
Present/permanent
address.
If an author has moved since the work described in the article was done, or was visiting at the time, a "Present address"
(or "Permanent address") may be indicated as a footnote to that author's name. The address at which the author actually did the work
must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required. The abstract should state briefly the purpose of the
research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able
to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard
or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding
general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly
established in the field may be eligible. These keywords will be used for indexing purposes.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do
not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help
during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Math formulae
Present simple formulae in the line of normal text where possible and use the solidus (/)
instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of
e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if
referred to explicitly in the text).
Footnotes
Footnotes should be used
sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into
the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes
themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate
each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing
of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following
fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
•
Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide
on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged
to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application
used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (note the resolution
requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save
the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line
drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please
do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document;
• Supply files that
are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color
artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct
resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge,
that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations
are reproduced in color in the printed version.
For color reproduction in print, you will receive information regarding the costs
from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on the Web only. For
further information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions.
Please
note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version should
you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached
to the figure. A caption should comprise a brief title (
not on the figure itself) and a description of the illustration. Keep
text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the
table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that
the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference
cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full.
Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these
references are included in the reference list they should follow the standard reference style of the journal and should include a substitution
of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that
the item has been accepted for publication.
Web references
As a minimum,
the full URL should be given. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.),
should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired,
or can be included in the reference list.
References
All publications
cited in the text should be presented in a list of references following the text of the manuscript. In the text refer to the author's
name (without initials) and year of publication (e.g. "Since Peterson (1993) has shown that..." or "This is in the agreement with results
obtained later (Kramer, 1994)"). For three or more authors use the first author followed by "et al.", in the text. The list of references
should be arranged alphabetically by authors' names. The manuscript should be carefully checked to ensure that the spelling of authors'
names and dates are exactly the same in the text as in the reference list. References should be given in the following form:
For
journals:
Bryant, C (1990) The Third World goes to town: will US policy catch up?
Cities 7 (2), 125-132.
Tipple, A G,
Korboe, D and Garrod, G (1997) Income, wealth and house ownership in urban Ghana.
Housing Stud. 12, 111-126.
For books:
Teymur, N (1988)
Rehumanising Housing, Butterworths, Guildford.
Raj, M and Mitra, B (1990) Households, housing and home
based economic activities in low income settlements. In: Raj, M and Nientied, P (Eds),
Housing and Income in Third World Urban Development.
Oxford and IBH, New Delhi, pp. 10-28.
Other Publications:
Where there is doubt include all bibliographical details.
Journal abbreviations source
Journal names should be abbreviated according to
Index Medicus journal
abbreviations:
http://www.nlm.nih.gov/tsd/serials/lji.html;
List of serial title word abbreviations:
http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service):
http://www.cas.org/sent.html.
Supplementary
material
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary
files offer the author additional possibilities to publish supporting applications, movies, animation sequences, high-resolution images,
background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of
your article in Elsevier Web products, including ScienceDirect:
http://www.sciencedirect.com. In order to ensure that your
submitted material is directly usable, please ensure that data are provided in one of our recommended file formats. Authors should submit
the material in electronic format together with the article and supply a concise and descriptive caption for each file. Video files:
please supply 'stills' with your files: you can choose any frame from the video or make a separate image. These will be used instead
of standard icons and will personalize the link to your supplementary information. For more detailed instructions please visit our artwork
instruction pages at
http://www.elsevier.com/artworkinstructions.
Submission
checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's
Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are
present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone
and fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including
title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
•
References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text,
and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
•
Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced
in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white
versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site
at
http://epsupport.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to
electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon
the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly
'Articles in press' because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown
as follows (example taken from a document in the journal
Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When
you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do
not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download
the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe
Reader version 7 (or higher) available free from
http://www.adobe.com/products/acrobat/readstep2.html. Instructions on how
to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and
return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then
mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan
the pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the
text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission
from the Editor. We will do everything possible to get your article published quickly and accurately. Therefore, it is important to ensure
that all of your corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent
corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of
your article if no response is received.
For inquiries
relating to the submission of articles (including electronic submission where available) please visit this journal's homepage. You can
track accepted articles at
http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's
status has changed. Also accessible from here is information on copyright, frequently asked questions and more. Contact details for questions
arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher.
Home | Elsevier Sites | Privacy Policy | Terms and Conditions | Feedback | Site Map | A Reed Elsevier Company