Johansson, E., Mattisson, T., Lyngfelt, A., Thunman, H.
  Combustion of syngas and natural gas in a 300 W chemical-looping combustor
(2006) Chemical Engineering Research and Design, 84 (9 A), pp. 819-827.

Jerndal, E., Mattisson, T., Lyngfelt, A.
  Thermal analysis of chemical-looping combustion
(2006) Chemical Engineering Research and Design, 84 (9 A), pp. 795-806.

Ng, D.K.S., Foo, D.C.Y., Tan, R.R., Tan, Y.L.
  Ultimate flowrate targeting with regeneration placement
(2007) Chemical Engineering Research and Design, 85 (9 A), pp. 1253-1267.

Foo, D.C.Y.
  Water cascade analysis for single and multiple impure fresh water feed
(2007) Chemical Engineering Research and Design, 85 (8 A), pp. 1169-1177.

Steeneveldt, R., Berger, B., Torp, T.A.
  Co2 capture and storage: Closing the knowing-doing gap
(2006) Chemical Engineering Research and Design, 84 (9 A), pp. 739-763.

Girisuta, B., Janssen, L.P.B.M., Heeres, H.J.
  Green chemicals: A kinetic study on the conversion of glucose to levulinic acid
(2006) Chemical Engineering Research and Design, 84 (5 A), pp. 339-349.

Chetouani, Y.
  Fault detection in a chemical reactor by using the standardized innovation
(2006) Process Safety and Environmental Protection, 84 (1 B), pp. 27-32.

Galán Sánchez, L.M., Meindersma, G.W., de Haan, A.B.
  Solvent Properties of Functionalized Ionic Liquids for CO2 Absorption
(2007) Chemical Engineering Research and Design, 85 (1 A), pp. 31-39.

Westerterp, K.R., Molga, E.J.
  Safety and runaway prevention in batch and semibatch reactors - A review
(2006) Chemical Engineering Research and Design, 84 (7 A), pp. 543-552.

Stankiewicz, A.
  Energy matters: Alternative sources and forms of energy for intensification of chemical and biochemical processes
(2006) Chemical Engineering Research and Design, 84 (7 A), pp. 511-521.

Pöllänen, K., Häkkinen, A., Reinikainen, S.-P., Louhi-Kultanen, M., Nyström, L.
  A study on batch cooling crystallization of sulphathiazole: Process monitoring using ATR-FTIR and product characterization by automated image analysis
(2006) Chemical Engineering Research and Design, 84 (1 A), pp. 47-59.

Févotte, G.
  In situ Raman spectroscopy for in-line control of pharmaceutical crystallization and solids elaboration processes: A review
(2007) Chemical Engineering Research and Design, 85 (7 A), pp. 906-920.

Kishore, N., Chhabra, R.P., Eswaran, V.
  Sedimentation in emulsions of mono-size droplets at moderate Reynolds numbers
(2006) Chemical Engineering Research and Design, 84 (12 A), pp. 1180-1193.

Bougrier, C., Delgenès, J.-P., Carrère, H.
  Combination of thermal treatments and anaerobic digestion to reduce sewage sludge quantity and improve biogas yield
(2006) Process Safety and Environmental Protection, 84 (4 B), pp. 280-284.

Dhiman, A.K., Chhabra, R.P., Eswaran, V.
  Steady flow of power-law fluids across a square cylinder
(2006) Chemical Engineering Research and Design, 84 (4 A), pp. 300-310.

Thomas, P.J., Stupples, D.W., Alghaffar, M.A.
  The extent of regulatory consensus on health and safety expenditure part 1: Development of the J-value technique and evaluation of regulators' recommendations
(2006) Process Safety and Environmental Protection, 84 (5 B), pp. 329-336.

Thomas, P.J., Stupples, D.W., Alghaffar, M.A.
  The life extension achieved by eliminating a prolonged radiation exposure
(2006) Process Safety and Environmental Protection, 84 (5 B), pp. 344-354.

Marikh, K., Berthiaux, H., Mizonov, V., Barantseva, E., Ponomarev, D.
  Flow analysis and Markov chain modelling to quantify the agitation effect in a continuous powder mixer
(2006) Chemical Engineering Research and Design, 84 (11 A), pp. 1059-1074.

Kreis, P., Górak, A.
  Process analysis of hybrid separation processes: Combination of distillation and pervaporation
(2006) Chemical Engineering Research and Design, 84 (7 A), pp. 595-600.

Mahfud, F.H., Melián-Cabrera, Manurung, R., Heeres, H.J.
  Biomass to fuels upgrading of flash pyrolysis oil by reactive distillation using a high boiling alcohol and acid catalysts
(2007) Process Safety and Environmental Protection, 85 (5 B), pp. 466-472.

Bai, J., Feng, X., Deng, C.
  Graphically based optimization of single-contaminant regeneration reuse water systems
(2007) Chemical Engineering Research and Design, 85 (8 A), pp. 1178-1187.

Tan, Y.L., Manan, Z.A., Foo, D.C.Y.
  Retrofit of water network with regeneration using water pinch analysis
(2007) Process Safety and Environmental Protection, 85 (4 B), pp. 305-317.

Liu, C., Xia, Z., Czernuszka, J.T.
  Design and development of three-dimensional scaffolds for tissue engineering
(2007) Chemical Engineering Research and Design, 85 (7 A), pp. 1051-1064.

Scargiali, F., D'Orazio, A., Grisafi, F., Brucato, A.
  Modelling and simulation of gas - Liquid hydrodynamics in mechanically stirred tanks
(2007) Chemical Engineering Research and Design, 85 (5 A), pp. 637-646.

Whitehead, K.A., Verran, J.
  The effect of surface topography on the retention of microorganisms
(2006) Food and Bioproducts Processing, 84 (4 C), pp. 253-259.

Hatamipour, M.S., Mowla, D.
  Drying behaviour of maize and green peas immersed in fluidized bed of inert energy carrier particles
(2006) Food and Bioproducts Processing, 84 (3 C), pp. 220-226.

Aspelund, A., Mølnvik, M.J., De Koeijer, G.
  Ship transport of CO2: Technical solutions and analysis of costs, energy utilization, exergy efficiency and CO2 emissions
(2006) Chemical Engineering Research and Design, 84 (9 A), pp. 847-855.

Kumar, M.K., Ghosh, P.
  Coalescence of air bubbles in aqueous solutions of ionic surfactants in presence of inorganic salt
(2006) Chemical Engineering Research and Design, 84 (8 A), pp. 703-710.

Patil, C.S., Van Sint Annaland, M., Kuipers, J.A.M.
  Experimental study of a membrane assisted fluidized bed reactor for H2 production by steam reforming of CH4
(2006) Chemical Engineering Research and Design, 84 (5 A), pp. 399-404.

Van Miltenburg, A., Zhu, W., Kapteijn, F., Moulijn, J.A.
  Adsorptive separation of light olefin/paraffin mixtures
(2006) Chemical Engineering Research and Design, 84 (5 A), pp. 350-354.

Agarwal, A., Gupta, S.K.
  Jumping gene adaptations of NSGA-II and their use in the multi-objective optimal design of shell and tube heat exchangers
(2008) Chemical Engineering Research and Design, 86 (2), pp. 123-139.

O'Grady, D., Barrett, M., Casey, E., Glennon, B.
  The effect of mixing on the metastable zone width and nucleation kinetics in the anti-solvent crystallization of benzoic acid
(2007) Chemical Engineering Research and Design, 85 (7 A), pp. 945-952.

Inman, S.J., Briscoe, B.J., Pitt, K.G.
  Topographic characterization of cellulose bilayered tablets interfaces
(2007) Chemical Engineering Research and Design, 85 (7 A), pp. 1005-1012.

Ein-Mozaffari, F., Bennington, C.P.J., Dumont, G.A., Buckingham, D.
  Measuring flow velocity in pulp suspension mixing using ultrasonic Doppler velocimetry
(2007) Chemical Engineering Research and Design, 85 (5 A), pp. 591-597.

Montante, G., Paglianti, A., Magelli, F.
  Experimental analysis and computational modelling of gas - Liquid stirred vessels
(2007) Chemical Engineering Research and Design, 85 (5 A), pp. 647-653.

Omebere-Iyari, N.K., Azzopardi, B.J.
  A study of flow patterns for gas/liquid flow in small diameter tubes
(2007) Chemical Engineering Research and Design, 85 (2 A), pp. 180-192.

Thomas, P.J., Stupples, D.W., Alghaffar, M.A.
  The extent of regulatory consensus on health and safety expenditure part 2: Applying the J-value technique to case studies across industries
(2006) Process Safety and Environmental Protection, 84 (5 B), pp. 337-343.

Chetouani, Y.
  Application of the generalized likelihood ratio test for detecting changes in a chemical reactor
(2006) Process Safety and Environmental Protection, 84 (5 B), pp. 371-377.

Hayashi, J.-I., Hosokai, S., Sonoyama, N.
  Gasification of low-rank solid fuels with thermochemical energy recuperation for hydrogen production and power generation
(2006) Process Safety and Environmental Protection, 84 (6 B), pp. 409-419.

Koutrouli, E.C., Gavala, H.N., Skiadas, I.V., Lyberatos, G.
  Mesophilic biohydrogen production from olive pulp
(2006) Process Safety and Environmental Protection, 84 (4 B), pp. 285-289.

Aubin, J., Kresta, S.M., Bertrand, J., Xuereb, C., Fletcher, D.F.
  Alternate operating methods for improving the performance of continuous stirred tank reactors
(2006) Chemical Engineering Research and Design, 84 (7 A), pp. 569-582.

Geelhoed, P.F., Lindken, R., Westerweel, J.
  Thermophoretic separation in microfluidics
(2006) Chemical Engineering Research and Design, 84 (5 A), pp. 370-373.

Behrens, M., Olujić, Ž., Jansens, P.J.
  Combining reaction with distillation: Hydrodynamic and mass transfer performance of modular catalytic structured packings
(2006) Chemical Engineering Research and Design, 84 (5 A), pp. 381-389.

Yamamoto, S., Kita, A.
  Rational design calculation method for stepwise elution chromatography of proteins
(2006) Food and Bioproducts Processing, 84 (1 C), pp. 72-77.

Anantharamaiah, N., Tafreshi, H.V., Pourdeyhimi, B.
  Numerical simulation of the formation of constricted waterjets in hydroentangling nozzles: Effects of nozzle geometry
(2006) Chemical Engineering Research and Design, 84 (3 A), pp. 231-238.

Sugiyama, H., Hirao, M., Mendivil, R., Fischer, U., Hungerbühler, K.
  A hierarchical activity model of chemical process design based on life cycle assessment
(2006) Process Safety and Environmental Protection, 84 (1 B), pp. 63-74.

Streat, M., Hellgardt, K., Newton, N.L.R.
  Hydrous ferric oxide as an adsorbent in water treatment. Part 2. Adsorption studies
(2008) Process Safety and Environmental Protection, 86 (1 B), pp. 11-20.

Schultes, M., Chambers, S.
  How to Surpass Conventional and High Capacity Structured Packings with Raschig Super-Pak
(2007) Chemical Engineering Research and Design, 85 (1 A), pp. 118-129.

Yun, R.L., Wan, T.J., Lin, C.H., Chang, Y.M., Shu, C.M.
  Fire and explosion characteristics of 3-methyl pyridine at 270°C with high oxygen concentrations
(2007) Process Safety and Environmental Protection, 85 (3 B), pp. 251-255.

Bhattacharya, S., Hebert, D., Kresta, S.M.
  Air entrainment in baffled stirred tanks
(2007) Chemical Engineering Research and Design, 85 (5 A), pp. 654-664.

Hori, E.S., Skogestad, S.
  Selection of control structure and temperature location for two-product distillation columns
(2007) Chemical Engineering Research and Design, 85 (3 A), pp. 293-306.

Balamurugan, S., Gaikar, V.G., Patwardhan, A.W.
  Hydrodynamic characteristics of gas-liquid ejectors
(2006) Chemical Engineering Research and Design, 84 (12 A), pp. 1166-1179.

Crosthwaite, C., Cameron, I., Lant, P., Litster, J.
  Balancing Curriculum Processes and Content in a Project Centred Curriculum. In Pursuit of Graduate Attributes
(2006) Education for Chemical Engineers, 1 (1), pp. 39-48.

Lonǎr, E., Djurić, M., Malbaša, R., Kolarov, L.J., Klašnja, M.
  Influence of working conditions upon Kombucha conducted fermentation of black tea
(2006) Food and Bioproducts Processing, 84 (3 C), pp. 186-192.

Johansson, M., Mattisson, T., Lyngfelt, A.
  Investigation of Mn3O4 with stabilized ZrO2 for chemical-looping combustion
(2006) Chemical Engineering Research and Design, 84 (9 A), pp. 807-818.

Vedantam, S., Joshi, J.B.
  Annular centrifugal contactors - A review
(2006) Chemical Engineering Research and Design, 84 (7 A), pp. 522-542.

Sales-Cruz, M., Gani, R.
  Computer-aided modelling of short-path evaporation for chemical product purification, analysis and design
(2006) Chemical Engineering Research and Design, 84 (7 A), pp. 583-594.

Almansoori, A., Shah, N.
  Design and operation of a future hydrogen supply chain: Snapshot model
(2006) Chemical Engineering Research and Design, 84 (6 A), pp. 423-438.

de Lathouder, K.M., Bakker, J.J.W., Kreutzer, M.T., Wallin, S.A., Kapteijn, F., Moulijn, J.A.
  Structured reactors for enzyme immobilization: A monolithic stirrer reactor for application in organic media
(2006) Chemical Engineering Research and Design, 84 (5 A), pp. 390-398.

Edwards, M.F.
  Product engineering: Some challenges for chemical engineers
(2006) Chemical Engineering Research and Design, 84 (4 A), pp. 255-260

Fiedler, E., Fiedler, M., Proetzel, G., Scheuermann, T., Fiedler, U., Rudolph, R.
  Affilin™ molecules: Novel ligands for bioseparation
(2006) Food and Bioproducts Processing, 84 (1 C), pp. 3-8.

Yu, J., Tian, F.-J., Mckenzie, L.J., Li, C.-Z.
  Char-supported nano iron catalyst for water-gas-shift reaction hydrogen production from coal/biomass gasification
(2006) Process Safety and Environmental Protection, 84 (2 B), pp. 125-130.

Woinarski, A.Z., Stevens, G.W., Snape, I.
  A natural zeolite permeable reactive barrier to treat heavy-metal contaminated waters in Antarctica: Kinetic and fixed-bed studies
(2006) Process Safety and Environmental Protection, 84 (2 B), pp. 109-116.

Kapic, A., Heindel, T.J.
  Correlating gas-liquid mass transfer in a stirred-tank reactor
(2006) Chemical Engineering Research and Design, 84 (3 A), pp. 239-245.

Leong, S.S.J., Middelberg, A.P.J.
  Dilution versus dialysis: A quantitative study of the oxidative refolding of recombinant human alpha-fetoprotein
(2006) Food and Bioproducts Processing, 84 (1 C), pp. 9-17.

Hoffmann, A., Ausner, I., Repke, J.-U., Wozny, G.
  Detailed investigation of multiphase (gas-liquid and gas-liquid-liquid) flow behaviour on inclined plates
(2006) Chemical Engineering Research and Design, 84 (2 A), pp. 147-154.

Cambiella, A., Benito, J.M., Pazos, C., Coca, J.
  Centrifugal separation efficiency in the treatment of waste emulsified oils
(2006) Chemical Engineering Research and Design, 84 (1 A), pp. 69-76.

Kletz, T.
  Training by Discussion
(2006) Education for Chemical Engineers, 1 (1), pp. 55-59.

Gomes, V.G., Barton, G.W., Petrie, J.G., Romagnoli, J., Holt, P., Abbas, A., Cohen, B., Harris, A.T., Haynes, B.S., Langrish, T.A.G., Orellana, J., See, H.T., Valix, M., White, D.
  Chemical Engineering Curriculum Renewal
(2006) Education for Chemical Engineers, 1 (1), pp. 116-125.