Guide for Authors

  • All journal information and instructions compiled in one document (PDF) in just one mouse-click Author information pack

    INTRODUCTION
    BEFORE YOU BEGIN
    • Ethics in publishing
    • Conflict of interest
    • Changes to authorship
    • Article transfer service
    • Copyright
    • Role of the funding source
    • Funding body agreements and policies
    • Open access
    • Submission
    PREPARATION
    • NEW SUBMISSIONS
    • References
    • Formatting requirements
    • REVISED SUBMISSIONS
    • LaTeX
    • Article structure
    • Essential title page information
    • Acknowledgements
    • Units
    • Math formulae
    • Footnotes
    • Artwork
    • Video data
    • AudioSlides
    • Supplementary data
    • Submission checklist
    AFTER ACCEPTANCE
    • Use of the Digital Object Identifier
    • Proofs
    AUTHOR INQUIRIES

    Your Paper Your Way
    your paper your way



    Journal of Safety Research is an interdisciplinary publication that provides for the exchange of ideas and data developed through research experience in all areas of safety including traffic, industry, farm, home, school and public. Articles may deal with a variety of topics such as human error and accidents, methods of accident investigation and analysis, evaluative examination of accident countermeasures or the relation between man-machine environment factors and hazards.

    Contact details for submission
    An author wishing to submit a paper to the JSR should submit via http://www.ees.elsevier.com/jsr. All correspondence, including notification of the Editor's decision and requests for revision, takes place electronically via this website.

    Ethics in publishing

    For information on Ethics in publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics and http://www.elsevier.com/journal-authors/ethics.

    Conflict of interest

    All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest. Further information and an example of a Conflict of Interest form can be found at: http://help.elsevier.com/app/answers/detail/a_id/286/p/7923.

    Submission declaration
    Authors are required to disclose papers published or under review in other journals that are based on similar methods or data. Please cite and explain how the current paper differs from these similar papers.

    Changes to authorship

    This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
    Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
    After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.

    Article transfer service

    This journal is part of our Article Transfer Service. This means that if the Editor feels your article is more suitable in one of our other participating journals, then you may be asked to consider transferring the article to one of those. If you agree, your article will be transferred automatically on your behalf with no need to reformat. More information about this can be found here: http://www.elsevier.com/authors/article-transfer-service.

    Copyright

    This journal offers authors a choice in publishing their research: Open access and Subscription.

    For subscription articles
    Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright, see http://www.elsevier.com/copyright). An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
    Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.

    For open access articles
    Upon acceptance of an article, authors will be asked to complete an 'Exclusive License Agreement' (for more information see http://www.elsevier.com/OAauthoragreement). Permitted reuse of open access articles is determined by the author's choice of user license (see http://www.elsevier.com/openaccesslicenses).

    Retained author rights
    As an author you (or your employer or institution) retain certain rights. For more information on author rights for:
    Subscription articles please see http://www.elsevier.com/journal-authors/author-rights-and-responsibilities.
    Open access articles please see http://www.elsevier.com/OAauthoragreement.

    Role of the funding source

    You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this should be stated.

    Funding body agreements and policies

    Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.

    Open access

    This journal offers authors a choice in publishing their research:

    Open access
    • Articles are freely available to both subscribers and the wider public with permitted reuse
    • An open access publication fee is payable by authors or their research funder
    Subscription
    • Articles are made available to subscribers as well as developing countries and patient groups through our access programs (http://www.elsevier.com/access)
    • No open access publication fee

    All articles published open access will be immediately and permanently free for everyone to read and download. Permitted reuse is defined by your choice of one of the following Creative Commons user licenses:
    Creative Commons Attribution (CC BY): lets others distribute and copy the article, to create extracts, abstracts, and other revised versions, adaptations or derivative works of or from an article (such as a translation), to include in a collective work (such as an anthology), to text or data mine the article, even for commercial purposes, as long as they credit the author(s), do not represent the author as endorsing their adaptation of the article, and do not modify the article in such a way as to damage the author's honor or reputation.
    Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA): for non-commercial purposes, lets others distribute and copy the article, to create extracts, abstracts and other revised versions, adaptations or derivative works of or from an article (such as a translation), to include in a collective work (such as an anthology), to text and data mine the article, as long as they credit the author(s), do not represent the author as endorsing their adaptation of the article, do not modify the article in such a way as to damage the author's honor or reputation, and license their new adaptations or creations under identical terms (CC BY-NC-SA).
    Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND): for non-commercial purposes, lets others distribute and copy the article, and to include in a collective work (such as an anthology), as long as they credit the author(s) and provided they do not alter or modify the article.

    To provide open access, this journal has a publication fee which needs to be met by the authors or their research funders for each article published open access.
    Your publication choice will have no effect on the peer review process or acceptance of submitted articles.

    The publication fee for this journal is $1800, excluding taxes. Learn more about Elsevier's pricing policy: http://www.elsevier.com/openaccesspricing.

    Language and language services
    Referees will be asked to consider the value of the paper relative to its length. Papers with poor English may be sent back to the author for correction.

    Submission

    Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.

    To submit your paper please click here http://www.ees.elsevier.com/jsr

    Authors who are unable to provide an electronic version or have other circumstances that prevent online submission must contact the Editorial Office prior to submission to discuss alternate options: Katie Porretta, Managing Editor, Journal of Safety Research, National Safety Council, 1121 Spring Lake Drive, Itasca, IL USA 60143-3201. Fax 630-285-0242, Phone 630-775-2323, E-mail Katie.Porretta@nsc.org

    Referees
    Authors are invited to provide names, addresses, and fields of interest of 4 to 6 persons outside their own institution who are qualified to act as referees. We will try to use at least one of these as a referee.

    NEW SUBMISSIONS

    Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts your files to a single PDF file, which is used in the peer-review process.
    As part of the Your Paper Your Way service, you may choose to submit your manuscript as a single file to be used in the refereeing process. This can be a PDF file or a Word document, in any format or lay-out that can be used by referees to evaluate your manuscript. It should contain high enough quality figures for refereeing. If you prefer to do so, you may still provide all or some of the source files at the initial submission. Please note that individual figure files larger than 10 MB must be uploaded separately.

    References

    There are no strict requirements on reference formatting at submission. References can be in any style or format as long as the style is consistent. Where applicable, author(s) name(s), journal title/book title, chapter title/article title, year of publication, volume number/book chapter and the pagination must be present. Use of DOI is highly encouraged. The reference style used by the journal will be applied to the accepted article by Elsevier at the proof stage. Note that missing data will be highlighted at proof stage for the author to correct.

    Formatting requirements

    There are no strict formatting requirements but all manuscripts must contain the essential elements needed to convey your manuscript, for example Abstract, Keywords, Introduction, Materials and Methods, Results, Conclusions, Artwork and Tables with Captions.
    If your article includes any Videos and/or other Supplementary material, this should be included in your initial submission for peer review purposes.
    Divide the article into clearly defined sections.

    Figures and tables embedded in text
    Please ensure the figures and the tables included in the single file are placed next to the relevant text in the manuscript, rather than at the bottom or the top of the file.

    REVISED SUBMISSIONS

    Use of word processing software
    Regardless of the file format of the original submission, at revision you must provide us with an editable file of the entire article. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: http://www.elsevier.com/guidepublication). See also the section on Electronic artwork.
    To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your word processor.

    LaTeX

    You are recommended to use the Elsevier article class elsarticle.cls (http://www.ctan.org/tex-archive/macros/latex/contrib/elsarticle) to prepare your manuscript and BibTeX (http://www.bibtex.org) to generate your bibliography.
    For detailed submission instructions, templates and other information on LaTeX, see http://www.elsevier.com/latex.

    Article structure

    Subdivision - numbered sections
    Use major and minor headings to aid readability. Headings should be short. Double space everything. Use wide margins.

    Introduction
    State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.

    Materials and methods
    Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
    Authors will normally be expected to submit a complete set of any data used in electronic form, or provide instructions for how to obtain them. Exceptions to this requirement may be made at the discretion of the handling editor. The author must describe methods and data sufficiently so the research can be replicated. The provision of code as well as data is encouraged, but not required. Upon acceptance, the data sets of published papers will be posted on the JSR website.

    Theory/calculation
    A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.

    Results
    Results should be clear and concise.

    Discussion
    This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

    Conclusions
    The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.

    Practical Applications

    We ask that each author include:
    (i) a sentence or two in the abstract with the subheading: "Practical Applications", and
    (ii) a section at the end of the manuscript that explains the topic's "practical applications".

    Appendices
    If mathematical derivations are needed, put them in an Appendix.

    Vitae
    Provide a biographical sketch of not more than 100 words for each author. These should be in a separate file.

    Essential title page information

    Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
    Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
    Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that phone numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date by the corresponding author.
    Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

    Abstract
    An abstract of 100-150 words is required. The abstract is one of the most important elements of your paper; many people will read only the abstract. Summarize the principal findings and how they were obtained. Explain why the findings are important for researchers and for practitioners. Be specific. Do not include references, jargon and mathematical notation.

    - Abstracts may have the following subheadings: Problem, Method, Results, Discussion, and Summary.
    - Abstracts must have a sentence or two under subheading "Practical Applications".

    Example: "Practical Application: Cell phone use continues to increase both at home and outdoor environments. The use of smart phones, with their more enticing features, increases the likelihood of distraction-induced injuries even more. Manufacturers should consider the addition of tools or applications on smart phones to remind users to remain alert to outside auditory stimuli that herald external hazards and to encourage them to not use these devices while engaged in other activities."

    Keywords
    Keywords (at least five) are also required. There is no point repeating words that are in the title.

    Acknowledgements

    Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).

    Units

    Follow internationally accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent in SI.

    Nomenclature and units
    Use simple notation. Our readership crosses many disciplines. Avoid unusual symbols if possible.

    Math formulae

    Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).

    Footnotes

    Footnotes should be used sparingly. Number them consecutively throughout the article. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
    Table footnotes
    Indicate each footnote in a table with a superscript lowercase letter.

    Artwork

    Electronic artwork
    General points
    • Make sure you use uniform lettering and sizing of your original artwork.
    • Preferred fonts: Arial (or Helvetica), Times New Roman (or Times), Symbol, Courier.
    • Number the illustrations according to their sequence in the text.
    • Use a logical naming convention for your artwork files.
    • Indicate per figure if it is a single, 1.5 or 2-column fitting image.
    • For Word submissions only, you may still provide figures and their captions, and tables within a single file at the revision stage.
    • Please note that individual figure files larger than 10 MB must be provided in separate source files.
    A detailed guide on electronic artwork is available on our website:
    http://www.elsevier.com/artworkinstructions.
    You are urged to visit this site; some excerpts from the detailed information are given here.
    Formats
    Regardless of the application used, when your electronic artwork is finalized, please 'save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
    EPS (or PDF): Vector drawings. Embed the font or save the text as 'graphics'.
    TIFF (or JPG): Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
    TIFF (or JPG): Bitmapped line drawings: use a minimum of 1000 dpi.
    TIFF (or JPG): Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
    Please do not:
    • Supply files that are optimized for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low.
    • Supply files that are too low in resolution.
    • Submit graphics that are disproportionately large for the content.

    Color artwork
    Please make sure that artwork files are in an acceptable format (TIFF (or JPEG), EPS (or PDF), or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
    Please note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.

    Figure captions
    Ensure that each illustration has a caption. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.

    Tables
    Simplify the presentation of data. Round data to no more than three digits where possible.

    References
    References should include only relevant sources; for example, those papers that proposed and developed the methods used, papers that clarify the methodology, and papers that add further evidence. Do not include references simply to increase the length of your bibliography or to increase citation rates.

    Web references
    As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.

    References in a special issue
    Please ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special Issue.

    Reference formatting
    There are no strict requirements on reference formatting at submission. References can be in any style or format as long as the style is consistent. Where applicable, author(s) name(s), journal title/book title, chapter title/article title, year of publication, volume number/book chapter and the pagination must be present. Use of DOI is highly encouraged. The reference style used by the journal will be applied to the accepted article by Elsevier at the proof stage. Note that missing data will be highlighted at proof stage for the author to correct. If you do wish to format the references yourself they should be arranged according to the following examples:

    Reference style
    All citations must be referenced and all references must be cited. For references with up to five authors, all authors must be listed in first citation followed by year of publication, thereafter list only the first author followed by "et al." and year of publication (the exception is if there are only two authors, in this case both should be listed in all citations). For references with six or more authors, list only the first author followed by "et al." with the year of publication throughout. All authors must be listed in reference section (no limit). At the end of the manuscript, the references should be listed alphabetically by surname of the first author.

    For citations, use ampersand (&) when citation is parenthetical; spell out "and" when citation is not parenthetical.

    All references must be formatted in accordance with the Publication Manual of the American Psychological Association (APA), Sixth Edition. For example:

    Journal Articles: Smith, A.B., Adams, K.D., & Jones, L.J.(1992). The hazards of living in a Volcano. Journal of Safety Research, 23(1), 81-94.

    Book: Perez, A.K., Little, T.H., & Brown Y.J. (1999). Safety in numbers. Itasca, IL: National Safety Council.

    For web sites: Hyndman, R.J. Time series data library, http://www.robhyndman.info/TSDL/. Accessed on 4 December 2006.

    Authors should ensure that there is a strict one-to-one correspondence between the authors' names (years) in the text and those in the reference list. In general, only published references should be cited. If unpublished, indicate how copies may be obtained. Please check all references against their original sources.

    See the APA manual for more detailed instructions.

    All references must be formatted in accordance with the Publication Manual of the American Psychological Association (APA), Fourth Edition. For Example:

    Journal Articles: Smith, A.B., Adams, K.D., & Jones, L.J.(1992). The hazards of living in a Volcano. Journal of Safety Research, 23(1), 81-94.

    Book: Perez, A.K., Little, T.H., & Brown Y.J. (1999). Safety in numbers. Itasca, IL: National Safety Council.

    See the APA manual for more detailed instructions.

    Video data

    Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include links to these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size of 50 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.

    AudioSlides

    The journal encourages authors to create an AudioSlides presentation with their published article. AudioSlides are brief, webinar-style presentations that are shown next to the online article on ScienceDirect. This gives authors the opportunity to summarize their research in their own words and to help readers understand what the paper is about. More information and examples are available at http://www.elsevier.com/audioslides. Authors of this journal will automatically receive an invitation e-mail to create an AudioSlides presentation after acceptance of their paper.

    Supplementary data

    Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.

    Submission checklist

    The following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this Guide for Authors for further details of any item.
    Ensure that the following items are present:
    One author has been designated as the corresponding author with contact details:
    • E-mail address
    • Full postal address
    • Telephone
    All necessary files have been uploaded, and contain:
    • Keywords
    • All figure captions
    • All tables (including title, description, footnotes)
    Further considerations
    • Manuscript has been 'spell-checked' and 'grammar-checked'
    • All references mentioned in the Reference list are cited in the text, and vice versa
    • Permission has been obtained for use of copyrighted material from other sources (including the Web)
    • Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white in print
    • If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
    For any further information please visit our customer support site at http://support.elsevier.com.

    Additional information
    Quotations should be kept to a minimum. Authors must obtain written permission from the publisher to use a quotation that exceeds 250 words.

    Evidence of prior peer review is helpful, such as a listing of the occasions on which this paper has been presented, and a list of colleagues who have reviewed the paper.

    The main paper should not contain the names of authors, or anything else that might identify them.

    Use of the Digital Object Identifier

    The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. Example of a correctly given DOI (in URL format; here an article in the journal Physics Letters B):
    http://dx.doi.org/10.1016/j.physletb.2010.09.059
    When you use a DOI to create links to documents on the web, the DOIs are guaranteed never to change.

    Proofs

    One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 9 (or higher) available free from http://get.adobe.com/reader. Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site: http://www.adobe.com/products/reader/tech-specs.html.
    If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately – please let us have all your corrections within 48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.

    Contacts:

    Editorial Office: Katie Porretta, Managing Editor, Journal of Safety Research, National Safety Council, 1121 Spring Lake Drive, Itasca, USA, IL, USA 60143-3201. Fax 630-285-0242, Phone 630-775-2323, E-mail: Katie.Porretta@nsc.org.

    Publishing Office: Fianait Mitchell, Journal Manager, Elsevier Ireland Ltd., Elsevier House, Brookvale Plaza, East Park, Shannon, Co. Clare, Ireland. Fax 353-61-709-111, Phone 353-61-709-639, E-mail: f.mitchell@elsevier.com.



    You can track your submitted article at http://help.elsevier.com/app/answers/detail/a_id/89/p/8045/. You can track your accepted article at http://www.elsevier.com/trackarticle. You are also welcome to contact Customer Support via http://support.elsevier.com.

Advertisement

advert image