Guide for Authors

  • All journal information and instructions compiled in one document (PDF) in just one mouse-click Author information pack

    BEFORE YOU BEGIN
    • Ethics in publishing
    • Conflict of interest
    • Submission declaration and verification
    • Changes to authorship
    • Copyright
    • Role of the funding source
    • Funding body agreements and policies
    • Open access
    • Language (usage and editing services)
    • Submission
    PREPARATION
    • NEW SUBMISSIONS
    • References
    • Formatting requirements
    • REVISED SUBMISSIONS
    • Article structure
    • Essential title page information
    • Abstract
    • Highlights
    • Keywords
    • Classification codes
    • Footnotes
    • Artwork
    • References
    • Reference Style
    • AudioSlides
    • Submission checklist
    AFTER ACCEPTANCE
    • Use of the Digital Object Identifier
    • Online proof correction
    • Offprints
    AUTHOR INQUIRIES

    Your Paper Your Way
    your paper your way

    Ethics in publishing

    For information on Ethics in publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics and http://www.elsevier.com/journal-authors/ethics.

    Conflict of interest

    All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest. Further information and an example of a Conflict of Interest form can be found at: http://help.elsevier.com/app/answers/detail/a_id/286/p/7923.

    Submission declaration and verification

    Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint, see http://www.elsevier.com/postingpolicy), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, including electronically without the written consent of the copyright-holder. To verify originality, your article may be checked by the originality detection service CrossCheck http://www.elsevier.com/editors/plagdetect.

    Changes to authorship

    This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
    Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
    After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.

    Copyright

    This journal offers authors a choice in publishing their research: Open access and Subscription.

    For subscription articles
    Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright, see http://www.elsevier.com/copyright). An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
    Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.

    For open access articles
    Upon acceptance of an article, authors will be asked to complete an 'Exclusive License Agreement' (for more information see http://www.elsevier.com/OAauthoragreement). Permitted reuse of open access articles is determined by the author's choice of user license (see http://www.elsevier.com/openaccesslicenses).

    Retained author rights
    As an author you (or your employer or institution) retain certain rights. For more information on author rights for:
    Subscription articles please see http://www.elsevier.com/journal-authors/author-rights-and-responsibilities.
    Open access articles please see http://www.elsevier.com/OAauthoragreement.

    Role of the funding source

    You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this should be stated.

    Funding body agreements and policies

    Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.

    Open access

    This journal offers authors a choice in publishing their research:

    Open access
    • Articles are freely available to both subscribers and the wider public with permitted reuse
    • An open access publication fee is payable by authors or their research funder
    Subscription
    • Articles are made available to subscribers as well as developing countries and patient groups through our access programs (http://www.elsevier.com/access)
    • No open access publication fee

    All articles published open access will be immediately and permanently free for everyone to read and download. Permitted reuse is defined by your choice of one of the following Creative Commons user licenses:
    Creative Commons Attribution (CC BY): lets others distribute and copy the article, to create extracts, abstracts, and other revised versions, adaptations or derivative works of or from an article (such as a translation), to include in a collective work (such as an anthology), to text or data mine the article, even for commercial purposes, as long as they credit the author(s), do not represent the author as endorsing their adaptation of the article, and do not modify the article in such a way as to damage the author's honor or reputation.
    Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA): for non-commercial purposes, lets others distribute and copy the article, to create extracts, abstracts and other revised versions, adaptations or derivative works of or from an article (such as a translation), to include in a collective work (such as an anthology), to text and data mine the article, as long as they credit the author(s), do not represent the author as endorsing their adaptation of the article, do not modify the article in such a way as to damage the author's honor or reputation, and license their new adaptations or creations under identical terms (CC BY-NC-SA).
    Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND): for non-commercial purposes, lets others distribute and copy the article, and to include in a collective work (such as an anthology), as long as they credit the author(s) and provided they do not alter or modify the article.

    To provide open access, this journal has a publication fee which needs to be met by the authors or their research funders for each article published open access.
    Your publication choice will have no effect on the peer review process or acceptance of submitted articles.

    The open access publication fee for this journal is $1800, excluding taxes. Learn more about Elsevier's pricing policy: http://www.elsevier.com/openaccesspricing.

    Language (usage and editing services)

    Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who feel their English language manuscript may require editing to eliminate possible grammatical or spelling errors and to conform to correct scientific English may wish to use the English Language Editing service available from Elsevier's WebShop (http://webshop.elsevier.com/languageediting/) or visit our customer support site (http://support.elsevier.com) for more information.

    Submission

    Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.

    Accordingly, users need to keep their contact coordinates on the registration page up-todate, using the "UPDATE MY INFORMATION" option.

    A direct link to the online submission, click here.

    NEW SUBMISSIONS

    Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts your files to a single PDF file, which is used in the peer-review process.
    As part of the Your Paper Your Way service, you may choose to submit your manuscript as a single file to be used in the refereeing process. This can be a PDF file or a Word document, in any format or lay-out that can be used by referees to evaluate your manuscript. It should contain high enough quality figures for refereeing. If you prefer to do so, you may still provide all or some of the source files at the initial submission. Please note that individual figure files larger than 10 MB must be uploaded separately.

    References

    There are no strict requirements on reference formatting at submission. References can be in any style or format as long as the style is consistent. Where applicable, author(s) name(s), journal title/book title, chapter title/article title, year of publication, volume number/book chapter and the pagination must be present. Use of DOI is highly encouraged. The reference style used by the journal will be applied to the accepted article by Elsevier at the proof stage. Note that missing data will be highlighted at proof stage for the author to correct.

    Formatting requirements

    There are no strict formatting requirements but all manuscripts must contain the essential elements needed to convey your manuscript, for example Abstract, Keywords, Introduction, Materials and Methods, Results, Conclusions, Artwork and Tables with Captions.
    If your article includes any Videos and/or other Supplementary material, this should be included in your initial submission for peer review purposes.
    Divide the article into clearly defined sections.

    Figures and tables embedded in text
    Please ensure the figures and the tables included in the single file are placed next to the relevant text in the manuscript, rather than at the bottom or the top of the file.

    REVISED SUBMISSIONS

    Use of word processing software
    Regardless of the file format of the original submission, at revision you must provide us with an editable file of the entire article. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: http://www.elsevier.com/guidepublication). See also the section on Electronic artwork.
    To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your word processor.

    Article structure

    Essential title page information

    Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
    Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
    Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that phone numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date by the corresponding author.
    Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

    Abstract

    A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.

    Highlights

    Highlights are mandatory for this journal. They consist of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including spaces, per bullet point). See http://www.elsevier.com/highlights for examples.

    Keywords

    Immediately after the abstract, provide a maximum of 6 keywords, using either British or American spelling, but be consistent, and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.

    Classification codes

    Please provide up to 6 standard JEL codes. The available codes may be accessed at JEL: http://www.aeaweb.org/jel/guide/jel.php.

    Footnotes

    Footnotes should be used sparingly. Number them consecutively throughout the article. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
    Table footnotes
    Indicate each footnote in a table with a superscript lowercase letter.

    Artwork

    Electronic artwork
    General points
    • Make sure you use uniform lettering and sizing of your original artwork.
    • Preferred fonts: Arial (or Helvetica), Times New Roman (or Times), Symbol, Courier.
    • Number the illustrations according to their sequence in the text.
    • Use a logical naming convention for your artwork files.
    • Indicate per figure if it is a single, 1.5 or 2-column fitting image.
    • For Word submissions only, you may still provide figures and their captions, and tables within a single file at the revision stage.
    • Please note that individual figure files larger than 10 MB must be provided in separate source files.
    A detailed guide on electronic artwork is available on our website:
    http://www.elsevier.com/artworkinstructions.
    You are urged to visit this site; some excerpts from the detailed information are given here.
    Formats
    Regardless of the application used, when your electronic artwork is finalized, please 'save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
    EPS (or PDF): Vector drawings. Embed the font or save the text as 'graphics'.
    TIFF (or JPG): Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
    TIFF (or JPG): Bitmapped line drawings: use a minimum of 1000 dpi.
    TIFF (or JPG): Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
    Please do not:
    • Supply files that are optimized for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low.
    • Supply files that are too low in resolution.
    • Submit graphics that are disproportionately large for the content.

    Color artwork
    Please make sure that artwork files are in an acceptable format (TIFF (or JPEG), EPS (or PDF), or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
    Please note: Because of technical complications that can arise by converting color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.

    Figure captions
    Ensure that each illustration has a caption. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.

    References

    Reference links
    Increased discoverability of research and high quality peer review are ensured by online links to the sources cited. In order to allow us to create links to abstracting and indexing services, such as Scopus, CrossRef and PubMed, please ensure that data provided in the references are correct. Please note that incorrect surnames, journal/book titles, publication year and pagination may prevent link creation. When copying references, please be careful as they may already contain errors. Use of the DOI is encouraged.

    Web references
    As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.

    Reference management software
    This journal has standard templates available in key reference management packages EndNote (http://www.endnote.com/support/enstyles.asp) and Reference Manager (http://refman.com/support/rmstyles.asp). Using plug-ins to wordprocessing packages, authors only need to select the appropriate journal template when preparing their article and the list of references and citations to these will be formatted according to the journal style which is described below.

    Reference formatting
    There are no strict requirements on reference formatting at submission. References can be in any style or format as long as the style is consistent. Where applicable, author(s) name(s), journal title/book title, chapter title/article title, year of publication, volume number/book chapter and the pagination must be present. Use of DOI is highly encouraged. The reference style used by the journal will be applied to the accepted article by Elsevier at the proof stage. Note that missing data will be highlighted at proof stage for the author to correct. If you do wish to format the references yourself they should be arranged according to the following examples:

    Reference Style

    All citations in the text should refer to:
    - Single Author: the Author's name (without initials, unless there is ambiguity) and the year of publication;
    - Two Authors: both Authors' names and the year of publication;
    -Three or more Authors: first Author's name followed by "et al." and the year of publication. Examples: "as demonstrated in (Allan, 1996a, 1996b, 1999; Allan and Jones, 1995). Lee et al. (2000) have recently shown"
    In the references list references should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same Author(s) in the same year must be identified by the letters "a", "b", "c", etc., placed after the year of publication. Examples:
    Reference to a journal publication:
    -Griffiths W, Judge G. Testing and estimating location vectors when the error covariance matrix is unknown. Journal of Econometrics 1992;54; 121-138 (note that journal names are not to be abbreviated).
    Reference to a book:
    -Hawawini G, Swary I. Mergers and acquisitions in the U.S. banking industry: Evidence from the capital markets. North-Holland: Amsterdam; 1990.
    Reference to a chapter in an edited book:
    -Brunner K, Melzer AH 1990. Money Supply. In: Friedman BM, Hahn FH (Eds), Handbook of monetary economics, vol.1. North-Holland: Amsterdam; 1990. p. 357-396.

    AudioSlides

    The journal encourages authors to create an AudioSlides presentation with their published article. AudioSlides are brief, webinar-style presentations that are shown next to the online article on ScienceDirect. This gives authors the opportunity to summarize their research in their own words and to help readers understand what the paper is about. More information and examples are available at http://www.elsevier.com/audioslides. Authors of this journal will automatically receive an invitation e-mail to create an AudioSlides presentation after acceptance of their paper.

    Code and data deposit to RunMyCode.org
    You can enrich your online article by uploading relevant computer code and data to the RunMyCode repository. Once published, your article on ScienceDirect will be linked to a dedicated RunMyCode companion website via the "Data for this article" application displayed next to the article, in the right hand side panel. This linkage will allow readers to access your code and data via the RunMyCode companion website. To create a companion website, please go to: http://www.runmycode.org/home.

    Submission checklist

    The following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this Guide for Authors for further details of any item.
    Ensure that the following items are present:
    One author has been designated as the corresponding author with contact details:
    • E-mail address
    • Full postal address
    • Telephone
    All necessary files have been uploaded, and contain:
    • Keywords
    • All figure captions
    • All tables (including title, description, footnotes)
    Further considerations
    • Manuscript has been 'spell-checked' and 'grammar-checked'
    • All references mentioned in the Reference list are cited in the text, and vice versa
    • Permission has been obtained for use of copyrighted material from other sources (including the Web)
    • Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white in print
    • If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
    For any further information please visit our customer support site at http://support.elsevier.com.

    Use of the Digital Object Identifier

    The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. Example of a correctly given DOI (in URL format; here an article in the journal Physics Letters B):
    http://dx.doi.org/10.1016/j.physletb.2010.09.059
    When you use a DOI to create links to documents on the web, the DOIs are guaranteed never to change.

    Online proof correction

    Corresponding authors will receive an e-mail with a link to our online proofing system, allowing annotation and correction of proofs online. The environment is similar to MS Word: in addition to editing text, you can also comment on figures/tables and answer questions from the Copy Editor. Web-based proofing provides a faster and less error-prone process by allowing you to directly type your corrections, eliminating the potential introduction of errors.
    If preferred, you can still choose to annotate and upload your edits on the PDF version. All instructions for proofing will be given in the e-mail we send to authors, including alternative methods to the online version and PDF.
    We will do everything possible to get your article published quickly and accurately. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor.It is important to ensure that all corrections are sent back to us in one communication. Please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility.

    Offprints

    The corresponding author, at no cost, will be provided with a personalized link providing 50 days free access to the final published version of the article on ScienceDirect. This link can also be used for sharing via email and social networks. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. Both corresponding and co-authors may order offprints at any time via Elsevier's WebShop (http://webshop.elsevier.com/myarticleservices/offprints). Authors requiring printed copies of multiple articles may use Elsevier WebShop's 'Create Your Own Book' service to collate multiple articles within a single cover (http://webshop.elsevier.com/myarticleservices/booklets).



    You can track your submitted article at http://help.elsevier.com/app/answers/detail/a_id/89/p/8045/. You can track your accepted article at http://www.elsevier.com/trackarticle. You are also welcome to contact Customer Support via http://support.elsevier.com.

Advertisement

advert image