Guide for Authors

All journal information and instructions compiled in one document (PDF) in just one mouse-click Author information pack

INTRODUCTION
• Types of paper
BEFORE YOU BEGIN
• Ethics in publishing
• Conflict of interest
• Submission declaration and verification
• Changes to authorship
• Copyright
• Role of the funding source
• Funding body agreements and policies
• Open access
• Green open access
• Language (usage and editing services)
• Submission
PREPARATION
• Use of word processing software
• LaTeX
• Article structure
• Essential title page information
• Abstract
• Highlights
• Keywords
• Chemical compounds
• Abbreviations
• Acknowledgements
• Units
• Math formulae
• Footnotes
• e-CRC
• Artwork
• Tables
• References
• Video data
• AudioSlides
• Supplementary material
• Database linking
• Interactive Phylogenetic Trees
• Submission checklist
AFTER ACCEPTANCE
• Use of the Digital Object Identifier
• Online proof correction
• Offprints
AUTHOR INQUIRIES

Types of paper

• Full-length Research Articles are complete reports of original, scientifically sound research. They must contribute new knowledge and be organized as described in this Guide. Manuscripts should not exceed 8000 words. Please follow carefully the organization of the sections described in "Preparation of text files" (see below). • Short Communications are brief reports of scientifically sound research, but of limited scope (for example, limited number of samples analysed), that contribute new knowledge. They should be prepared as described in this Guide, and should not exceed 4000 words. Please follow carefully the organization of the sections described in "Preparation of text files" (see below). • Reviews are papers which provide an analysis of a scientific or applied field, which include all important findings and bring together reports from a number of sources. Manuscripts should not exceed 12,000 words (excluding references). Review articles may be invited by the Editor or the Editorial Board. Alternatively, potential authors considering the preparation of a Review article should contact the Editor to suggest the topic and its scope, providing an outline in the form of major headings and a summary statement. In any case, such articles are subject to the normal processes of peer review and revision.

Subjects not considered for publication
• Development of methods if not validated in situ. To be suitable for publication in IJFM, new methods for the detection and/or quantification of target microorganisms must be validated in artificially and naturally contaminated foods. Such papers focusing on method development without application in the food matrix should be submitted to journals dealing with microbiological methods or applied microbiology.
• Natural and safe antimicrobial substances: since an extended literature is available on this subject, IJFM publishes only relevant and innovative papers. More specifically:
- in the case of essential oils, spices and chemical compounds: the antimicrobial activity should be tested in real food systems to validate their efficacy, testing in vitro only would not be sufficient for publication in IJFM. Moreover a detailed chemical analysis of the natural extract should be presented with indication of which compounds are exerting the antimicrobial activity;
- for bacteriocins, surveys of bacteriocin-producing strains in food products would not be considered unless the genes responsible for production were genetically characterized to show originality of such genes. IJFM gives priority to papers describing new bacteriocins (as determined by genetic approaches, N-terminal sequencing or results on antimicrobial spectrum and mechanisms) and application of bacteriocinogenic strains in situ, other than surveys of bacteriocin-producing strains in food products.
• Surveys focusing on the detection and quantification of toxins and microbial metabolites (mycotoxins, bacterial toxins, biogenic amines) and papers presenting new methods for detection and quantification of toxins and microbial metabolites will not be published in IJFM, unless they do contain correlated microbiological data of food safety significance. Papers presenting analytical data only should be sent to toxicology or food control journals.
• Gut microbiology and probiotic-targeted papers will have to present relevant direct links to food microbiology/safety. Animal models or studies in which the host is the main target of investigation should be submitted to appropriate journals and not to IJFM.
• Microbiological aspects of the production of ingredients should be submitted to suitable biotechnology journals. However, papers that consider the use of microorganisms to enhance the level of specific vitamins, amino acids, flavours, colours, polysaccharides etc in foods/beverages will be considered by IJFM.
• Papers where the microbiology is only focused on primary production, without a clear connection to quality and safety of foods, should be sent to journals related to primary production.
• Microbiology specifically related to human health without a clear focus on its relation to foods/beverages should be submitted to medical journals or similar.
• Repetition of studies conducted in other countries and locations, e.g. work on patterns of antibiotic resistance, prevalence of specific pathogens etc., will not be considered unless new scientific information has been achieved and clearly documented in the manuscript.

Furthermore:
• the word "probiotic" should only be used for organisms where real health effects are shown;
• "prediction and validation" should only be used if prediction and validation are really carried out with new independent data;
• for papers on modelling, parameter values should always be presented also with a measure of their confidence (confidence interval, standard error).

Lastly, it is responsibility of the authors to pay attention to grammar and spelling.

Additional information
Questions regarding content of a proposed submission can be directed to the Editor-in-Chief:
Professor Luca Cocolin
DIVAPRA, Faculty of Agriculture, University of Turin
Via Leonardo da Vinci 44
10095 Grugliasco
Turin
Italy
E-mail: lcocolin@gmail.com

It is the author's responsibility to ensure that manuscripts are written in clear and comprehensible English. Authors whose native language is not English are strongly advised to have their manuscripts checked by an English-speaking colleague prior to submission. Manuscripts written in poor English will not be accepted for further review.

Review policy
A peer review system involving two or three reviewers is used to ensure high quality of manuscripts accepted for publication. The Editor-in-Chief and Editors have the right to decline formal review of the manuscript when it is deemed that the manuscript is:
1) on a topic outside the scope of the Journal;
2) lacking technical merit;
3) focused on foods or processes that are of narrow regional scope and significance;
4) of insufficient novelty for a wide international readership;
5) fragmentary and provides marginally incremental results; or
6) is poorly written.

Ethics in publishing

For information on Ethics in publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics and http://www.elsevier.com/journal-authors/ethics.

Conflict of interest

All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest. Further information and an example of a Conflict of Interest form can be found at: http://help.elsevier.com/app/answers/detail/a_id/286/p/7923.

Submission declaration and verification

Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint, see http://www.elsevier.com/sharingpolicy), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, including electronically without the written consent of the copyright-holder. To verify originality, your article may be checked by the originality detection service CrossCheck http://www.elsevier.com/editors/plagdetect.

Changes to authorship

This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.

Copyright

Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright, see http://www.elsevier.com/copyright). An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.

Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.

For open access articles: Upon acceptance of an article, authors will be asked to complete an 'Exclusive License Agreement' (for more information see http://www.elsevier.com/OAauthoragreement). Permitted third party reuse of open access articles is determined by the author's choice of user license (see http://www.elsevier.com/openaccesslicenses).

Author rights
As an author you (or your employer or institution) have certain rights to reuse your work. For more information see http://www.elsevier.com/copyright.

Role of the funding source

You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this should be stated.

Funding body agreements and policies

Elsevier has established a number of agreements with funding bodies which allow authors to comply with their funder's open access policies. Some authors may also be reimbursed for associated publication fees. To learn more about existing agreements please visit http://www.elsevier.com/fundingbodies.

Open access

This journal offers authors a choice in publishing their research:

Open access
• Articles are freely available to both subscribers and the wider public with permitted reuse
• An open access publication fee is payable by authors or on their behalf e.g. by their research funder or institution
Subscription
• Articles are made available to subscribers as well as developing countries and patient groups through our universal access programs (http://www.elsevier.com/access).
• No open access publication fee payable by authors.

Regardless of how you choose to publish your article, the journal will apply the same peer review criteria and acceptance standards.

For open access articles, permitted third party (re)use is defined by the following Creative Commons user licenses:

Creative Commons Attribution (CC BY)
Lets others distribute and copy the article, create extracts, abstracts, and other revised versions, adaptations or derivative works of or from an article (such as a translation), include in a collective work (such as an anthology), text or data mine the article, even for commercial purposes, as long as they credit the author(s), do not represent the author as endorsing their adaptation of the article, and do not modify the article in such a way as to damage the author's honor or reputation.

Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
For non-commercial purposes, lets others distribute and copy the article, and to include in a collective work (such as an anthology), as long as they credit the author(s) and provided they do not alter or modify the article.

The open access publication fee for this journal is USD 3250, excluding taxes. Learn more about Elsevier's pricing policy: http://www.elsevier.com/openaccesspricing.

Green open access

Authors can share their research in a variety of different ways and Elsevier has a number of green open access options available. We recommend authors see our green open access page for further information (http://elsevier.com/greenopenaccess). Authors can also self-archive their manuscripts immediately and enable public access from their institution's repository after an embargo period. This is the version that has been accepted for publication and which typically includes author-incorporated changes suggested during submission, peer review and in editor-author communications. Embargo period: For subscription articles, an appropriate amount of time is needed for journals to deliver value to subscribing customers before an article becomes freely available to the public. This is the embargo period and begins from the publication date of the issue your article appears in.

This journal has an embargo period of 12 months.

Language (usage and editing services)

Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who feel their English language manuscript may require editing to eliminate possible grammatical or spelling errors and to conform to correct scientific English may wish to use the English Language Editing service available from Elsevier's WebShop (http://webshop.elsevier.com/languageediting/) or visit our customer support site (http://support.elsevier.com) for more information.

Submission

Our online submission system guides you stepwise through the process of entering your article details and uploading your files. The system converts your article files to a single PDF file used in the peer-review process. Editable files (e.g., Word, LaTeX) are required to typeset your article for final publication. All correspondence, including notification of the Editor's decision and requests for revision, is sent by e-mail.

Authors must provide and use an email address unique to themselves and not shared with another author registered in EES, or a department.

Use of word processing software

It is important that the file be saved in the native format of the word processor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the word processor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: http://www.elsevier.com/guidepublication). Note that source files of figures, tables and text graphics will be required whether or not you embed your figures in the text. See also the section on Electronic artwork.
To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your word processor.

Other than the cover page, every page of the manuscript, including the title page, references, tables etc. should be numbered; however, in the text no reference should be made to page numbers. Lines must be numbered consecutively throughout the manuscript.

LaTeX

You are recommended to use the Elsevier article class elsarticle.cls (http://www.ctan.org/tex-archive/macros/latex/contrib/elsarticle) to prepare your manuscript and BibTeX (http://www.bibtex.org) to generate your bibliography.
For detailed submission instructions, templates and other information on LaTeX, see http://www.elsevier.com/latex.

Article structure

Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear on its own separate line.

Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.

Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.

Results
Results should be clear and concise.

Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.

Essential title page information

Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Please clearly indicate the given name(s) and family name(s) of each author and check that all names are accurately spelled. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

Abstract

A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.

The abstract should not exceed 400 words.

Highlights

Highlights are mandatory for this journal. They consist of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate editable file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including spaces, per bullet point). See http://www.elsevier.com/highlights for examples.

Keywords

Immediately after the abstract, provide a maximum of 6 keywords, using British spelling and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.

Chemical compounds

You can enrich your article by providing a list of chemical compounds studied in the article. The list of compounds will be used to extract relevant information from the NCBI PubChem Compound database and display it next to the online version of the article on ScienceDirect. You can include up to 10 names of chemical compounds in the article. For each compound, please provide the PubChem CID of the most relevant record as in the following example: Glutamic acid (PubChem CID:611). The PubChem CIDs can be found via http://www.ncbi.nlm.nih.gov/pccompound. Please position the list of compounds immediately below the 'Keywords' section. It is strongly recommended to follow the exact text formatting as in the example below:
Chemical compounds studied in this article
Ethylene glycol (PubChem CID: 174); Plitidepsin (PubChem CID: 44152164); Benzalkonium chloride (PubChem CID: 15865)
More information is available at: http://www.elsevier.com/PubChem.

When preparing your paper, authors should avoid using the term microflora and instead use microbiota. In addition please do not use the expression rDNA but rather rRNA gene (S).

Abbreviations

Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.

Acknowledgements

Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).

Units

Follow internationally accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent in SI.

Temperatures should be given in degrees Celsius. The unit 'billion' (109 in America, 1012 in Europe) is ambiguous and should not be used. Units must be indicated as g/L and not gL-1.

Math formulae

Please submit math equations as editable text and not as images. Present simple formulae in line with normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).

Embedded math equations
If you are submitting an article prepared with Microsoft Word containing embedded math equations then please read this related support information (http://support.elsevier.com/app/answers/detail/a_id/302/).

If equations from Microsoft Word 2007 are not correctly represented in the pdf, this might be solved by storing the word file as Word 97-2003 document (*.doc), and upload.

Footnotes

Footnotes should be used sparingly. Number them consecutively throughout the article. Many word processors can build footnotes into the text, and this feature may be used. Otherwise, please indicate the position of footnotes in the text and list the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.

e-CRC

General points: Elsevier can only accept MS Word, LaTeX, or postscript/PDF documents as electronic camera-ready copy (e-CRC). Electronic files can be stored on CD or may be transferred to Elsevier via FTP (details available from Customer support: http://support.elsevier.com). Please note: always send the source file (Word or LaTex) together with any PDF files as this can contribute to better quality final PDF files and help in the conversion to XML.
MS Word file: Please ensure that you use normal fonts as much as possible in your documents, such as Times New Roman, Arial, Symbol, Helvetica, or Times (TrueType or Type 1 fonts). Special fonts, such as those used in the Far East (Japanese, Chinese, Korean, etc.) may be cause problems during processing. If you use a lot of special fonts, please convert the document to PDF with Adobe Acrobat (see below, and also Elsevier's Quickguide: http://www.elsevier.com/guidepublication). Please place figures in a logical place within the document (see also the section on Preparation of electronic illustrations at http://www.elsevier.com/artworkinstructions). To avoid unnecessary errors you are strongly advised to use the 'spell-checker' function of your wordprocessor.
LaTeX documents: Please use a LaTeX setup that uses Type 1 fonts instead of the sometimes default bitmap fonts (Type 3, or pk fonts). For instance, using the LaTeX Times package may be enough to enable this adjustment. For information on LaTex see http://www.elsevier.com/latex. Please provide all document-related and temporary files on submission, as well as the resulting postscript or PDF file.
Postscript/PDF files: Please create postscript files, making sure all fonts are embedded. When creating PDF files with Adobe Acrobat, please use version 4.05 or higher, and use the standard "Press Optimized" settings, as provided by Adobe.

Artwork

Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Embed the used fonts if the application provides that option.
• Aim to use the following fonts in your illustrations: Arial, Courier, Times New Roman, Symbol, or use fonts that look similar.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Size the illustrations close to the desired dimensions of the published version.
• Submit each illustration as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions.
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is' in the native document format.
Regardless of the application used other than Microsoft Office, when your electronic artwork is finalized, please 'Save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS (or PDF): Vector drawings, embed all used fonts.
TIFF (or JPEG): Color or grayscale photographs (halftones), keep to a minimum of 300 dpi.
TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi.
TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of 500 dpi.
Please do not:
• Supply files that are optimized for screen use (e.g., GIF, BMP, PICT, WPG); these typically have a low number of pixels and limited set of colors;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.

Color artwork
Please make sure that artwork files are in an acceptable format (TIFF (or JPEG), EPS (or PDF), or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color online (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or online only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications that can arise by converting color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.

Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.

Tables

Please submit tables as editable text and not as images. Tables can be placed either next to the relevant text in the article, or on separate page(s) at the end. Number tables consecutively in accordance with their appearance in the text and place any table notes below the table body. Be sparing in the use of tables and ensure that the data presented in them do not duplicate results described elsewhere in the article. Please avoid using vertical rules.

References

Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'. Citation of a reference as 'in press' implies that the item has been accepted for publication.

Web references
As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.

References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special Issue.

Reference management software
Most Elsevier journals have a standard template available in key reference management packages. This covers packages using the Citation Style Language, such as Mendeley (http://www.mendeley.com/features/reference-manager) and also others like EndNote (http://www.endnote.com/support/enstyles.asp) and Reference Manager (http://refman.com/downloads/styles). Using plug-ins to word processing packages which are available from the above sites, authors only need to select the appropriate journal template when preparing their article and the list of references and citations to these will be formatted according to the journal style as described in this Guide. The process of including templates in these packages is constantly ongoing. If the journal you are looking for does not have a template available yet, please see the list of sample references and citations provided in this Guide to help you format these according to the journal style.

If you manage your research with Mendeley Desktop, you can easily install the reference style for this journal by clicking the link below:
http://open.mendeley.com/use-citation-style/international-journal-of-food-microbiology
When preparing your manuscript, you will then be able to select this style using the Mendeley plug-ins for Microsoft Word or LibreOffice. For more information about the Citation Style Language, visit http://citationstyles.org.

Reference style
Responsibility for the accuracy of bibliographic citations lies entirely with the Authors. Please ensure that every reference cited within the text is also present in the reference list (and vice versa). Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list, they should follow the standard reference style and should include a substitution of the publication date with either "unpublished results" or "personal communication". Citation of a reference as "in press" implies that the item has been accepted for publication. All publications cited in the text should be presented in a list of references following the text of the manuscript.
All citations in the text should refer to:
1. Single author: the author's name (without initials, unless there is ambiguity) and the year of publication;
2. Two authors: both authors' names and the year of publication;
3. Three or more authors: first author's name followed by 'et al.' and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed first alphabetically, then chronologically.
Examples: "as demonstrated (Allan, 1996a, 1996b, 1999; Allan and Jones, 1995). Kramer et al. (2000) have recently shown ...."
List: References should be arranged alphabetically by authors' names and should be as full as possible, listing all authors, the full title of articles and journals, publisher and year. Note that journal names are not to be abbreviated. The manuscript should be carefully checked to ensure that the spelling of authors' names and dates are exactly the same in the text as in the reference list.
Examples:
Reference to a journal publication:
Ono, K., Yamamoto, K., 1999. Contamination of meat with Campylobacter jejuni in Saitama, Japan. International Journal of Food Microbiology 47, 211-219.
Reference to a book:
Strunk Jr, W., White, E. B., 1979. The Elements of Style, third ed. Macmillan, New York.
Reference to a chapter in an edited book:
Kramer, J.M., Gilbert, R.J., 1989. Bacillus cereus. In: Doyle, M.P. (Ed.), Foodborne Bacterial Pathogens. Marcel Dekker, New York, pp. 22-70.
Caddick, M.X., 1994. Nitrogen metabolite repression. In: Martinelli, S.D., Kinghorn, J.R. (Eds.), Aspergillus: 50 Years on, Progress in Industrial Microbiology, vol. 29. Elsevier Science, Amsterdam, pp. 323-353.

Video data

Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include links to these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size of 150 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.

AudioSlides

The journal encourages authors to create an AudioSlides presentation with their published article. AudioSlides are brief, webinar-style presentations that are shown next to the online article on ScienceDirect. This gives authors the opportunity to summarize their research in their own words and to help readers understand what the paper is about. More information and examples are available at http://www.elsevier.com/audioslides. Authors of this journal will automatically receive an invitation e-mail to create an AudioSlides presentation after acceptance of their paper.

Supplementary material

Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.

Database linking

Elsevier encourages authors to connect articles with external databases, giving readers access to relevant databases that help to build a better understanding of the described research. Please refer to relevant database identifiers using the following format in your article: Database: xxxx (e.g., TAIR: AT1G01020; CCDC: 734053; PDB: 1XFN). See http://www.elsevier.com/databaselinking for more information and a full list of supported databases.

Interactive Phylogenetic Trees

You can enrich your online articles by providing phylogenetic tree data files (optional) in Newick or NeXML format, which will be visualized using the interactive tree viewer embedded within the online article. Using the viewer it will be possible to zoom into certain tree areas, change the tree layout, search within the tree, and collapse/expand tree nodes and branches. Submitted tree files will also be available for downloading from your online article on ScienceDirect. Each tree must be contained in an individual data file before being uploaded separately to the online submission system, via the 'phylogenetic tree data' submission category. Newick files must have the extension .new or .nwk (note that a semicolon is needed to end the tree). Please do not enclose comments in Newick files and also delete any artificial line breaks within the tree data because these will stop the tree from showing. For NeXML, the file extension should be .xml. Please do not enclose comments in the file. Tree data submitted with other file extensions will not be processed. Please make sure that you validate your Newick/NeXML files prior to submission. For more information please see http://www.elsevier.com/phylogenetictrees.

Submission checklist

The following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
All necessary files have been uploaded, and contain:
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Internet)
Printed version of figures (if applicable) in color or black-and-white
• Indicate clearly whether or not color or black-and-white in print is required.
• For reproduction in black-and-white, please supply black-and-white versions of the figures for printing purposes.
For any further information please visit our customer support site at http://support.elsevier.com.

Use of the Digital Object Identifier

The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. Example of a correctly given DOI (in URL format; here an article in the journal Physics Letters B):
http://dx.doi.org/10.1016/j.physletb.2010.09.059
When you use a DOI to create links to documents on the web, the DOIs are guaranteed never to change.

Online proof correction

Corresponding authors will receive an e-mail with a link to our online proofing system, allowing annotation and correction of proofs online. The environment is similar to MS Word: in addition to editing text, you can also comment on figures/tables and answer questions from the Copy Editor. Web-based proofing provides a faster and less error-prone process by allowing you to directly type your corrections, eliminating the potential introduction of errors.
If preferred, you can still choose to annotate and upload your edits on the PDF version. All instructions for proofing will be given in the e-mail we send to authors, including alternative methods to the online version and PDF.
We will do everything possible to get your article published quickly and accurately. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. It is important to ensure that all corrections are sent back to us in one communication. Please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility.

Offprints

The corresponding author, at no cost, will be provided with a personalized link providing 50 days free access to the final published version of the article on ScienceDirect. This link can also be used for sharing via email and social networks. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. Both corresponding and co-authors may order offprints at any time via Elsevier's WebShop (http://webshop.elsevier.com/myarticleservices/offprints). Authors requiring printed copies of multiple articles may use Elsevier WebShop's 'Create Your Own Book' service to collate multiple articles within a single cover (http://webshop.elsevier.com/myarticleservices/booklets).



You can track your submitted article at http://www.elsevier.com/track-submission. You can track your accepted article at http://www.elsevier.com/trackarticle. You are also welcome to contact Customer Support via http://support.elsevier.com.