Guide for Authors

  • All journal information and instructions compiled in one document (PDF) in just one mouse-click Author information pack

    INTRODUCTION
    • Types of article
    BEFORE YOU BEGIN
    • Ethics in publishing
    • Conflict of interest
    • Submission declaration and verification
    • Changes to authorship
    • Article transfer service
    • Copyright
    • Role of the funding source
    • Funding body agreements and policies
    • Open access
    • Language (usage and editing services)
    • Submission
    • Referees
    PREPARATION
    • Article structure
    • Essential title page information
    • Abstract
    • Graphical abstract
    • Highlights
    • Keywords
    • Abbreviations
    • Acknowledgements
    • Database linking
    • Artwork
    • Tables
    • References
    • Video data
    • AudioSlides
    • Supplementary data
    • Interactive Phylogenetic Trees
    • Submission checklist
    AFTER ACCEPTANCE
    • Use of the Digital Object Identifier
    • Online proof correction
    • Offprints
    AUTHOR INQUIRIES



    General and Comparative Endocrinology publishes articles concerned with the many complexities of vertebrate and invertebrate endocrine systems at the sub-molecular, molecular, cellular and organismal levels of analysis. Although by no means comprehensive, submission of manuscripts in the following areas of endocrine science are encouraged:

    • endocrine regulation and interactions in physiological processes ("systems" biology - reproduction, body fluid homeostasis, skeletal and calcium homeostasis; gastrointestinal function; integumentary function; neurophysiology; cardiovascular function etc);
    • endocrine pharmacology;
    • the role of gene expression in endocrine systems;
    • behavioral endocrinology;
    • developmental endocrinology;
    • growth factors;
    • endocrine- environmental interactions;
    • immuno-endocrine interactions;
    • neuroendocrinology, neuropeptides, neurotransmitters;
    • hormonal receptors;
    • molecular evolution of hormones and gene families.

    Comparative Molecular Analyses
    - Genomics
    - Proteomics
    - Transcriptomics
    - Metabolomics

    Manuscripts that advance understanding within and between these broad disciplines are especially encouraged.

    General and Comparative Endocrinology will consider for publication of research articles that address endocrinology in its widest sense, i.e. both among, and within, living organisms - vertebrate, invertebrate and plant - including their evolutionary antecedents. Original and novel information in acute, and in the longer term, evolutionary adaptive homeostasis are of especial interest to the journal.

    The European Society for Comparative Endocrinology, North American Society for Comparative Endocrinology, The Division of Comparative Endocrinology of the Society for Integrative and Comparative Biology, the Asia and Oceania Society for Comparative Endocrinology and the Japan Society for Comparative Endocrinology are affiliated to General and Comparative Endocrinology.

    Types of article

    Regular article - Full-length original research papers, reporting novel findings in all endocrinology related fields.

    Short Communications – these are articles that present a new technique, idea or concept and are typically 10 double spaced pages in length.

    Communications in Comparative Molecular Analyses - these are original research manuscripts ranging from 10 to 24 double spaced pages which report studies deploying any kind of "omics" technologies, which are relevant to the endocrine literature (i.e., results of small to high throughput studies). Manuscripts can report the analysis of primary data or in silico analysis or meta-analysis of data deposited in databases and should frame the significance of the data in light of comparative endocrinology and endocrine function.

    Review - topics of interest to its broad readership. Review submissions are typically 20-25 double spaced pages in length.

    Mini-Review - are focused on a particular topic of interest. Mini-reviews submissions are typically 12 double spaced pages in length.

    Editorial – these are typically preface to Special Issues but we welcome suggestions for opinion pieces that discuss issues (scientific, social or political) that affect research in the community. Either type of editorial should be 2 to 3 double spaced pages.

    Book reviews – This is a brief essay of 2 double spaced pages critically evaluating the contribution of a recently published book. We also welcome book review essays revolving around descriptions and critiques of a group of published books that serves as springboards for discussions of topics that emerge as one considers overlaps and gaps between the books in question The length should be commensurate with the number of books reviewed (eg. 2 books would be 4 double spaced pages).

    Memorials – of notable comparative endocrinologists, outlining their career and indicating their main contributions to the field. The length should be up to 2 double spaced pages and include a photograph.

    Special Issues - The journal welcomes proposals for special issues on topics that fall within the scope of the journal. Those wishing to guest edit a special issue should prepare a proposal that:
    • Sets out the importance of the area and explains the anticipated contribution of the special issue in advancing understanding in this area
    • Identifies papers and authors for possible inclusion in the special issue and an indication of the time-scale in which the special issue could be produced.

    Proposals should be sent to EiC Professor Robert Dores, robert.dores@du.edu

    Ethics in publishing

    For information on Ethics in publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics and http://www.elsevier.com/journal-authors/ethics.

    Conflict of interest

    All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest. Further information and an example of a Conflict of Interest form can be found at: http://help.elsevier.com/app/answers/detail/a_id/286/p/7923.

    Submission declaration and verification

    Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint, see http://www.elsevier.com/postingpolicy), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, including electronically without the written consent of the copyright-holder. To verify originality, your article may be checked by the originality detection service CrossCheck http://www.elsevier.com/editors/plagdetect.

    Changes to authorship

    This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
    Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
    After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.

    Article transfer service

    This journal is part of our Article Transfer Service. This means that if the Editor feels your article is more suitable in one of our other participating journals, then you may be asked to consider transferring the article to one of those. If you agree, your article will be transferred automatically on your behalf with no need to reformat. More information about this can be found here: http://www.elsevier.com/authors/article-transfer-service.

    Copyright

    This journal offers authors a choice in publishing their research: Open access and Subscription.

    For subscription articles
    Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright, see http://www.elsevier.com/copyright). An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
    Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.

    For open access articles
    Upon acceptance of an article, authors will be asked to complete an 'Exclusive License Agreement' (for more information see http://www.elsevier.com/OAauthoragreement). Permitted reuse of open access articles is determined by the author's choice of user license (see http://www.elsevier.com/openaccesslicenses).

    Retained author rights
    As an author you (or your employer or institution) retain certain rights. For more information on author rights for:
    Subscription articles please see http://www.elsevier.com/journal-authors/author-rights-and-responsibilities.
    Open access articles please see http://www.elsevier.com/OAauthoragreement.

    Role of the funding source

    You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this should be stated.

    Funding body agreements and policies

    Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.

    US National Institutes of Health (NIH) voluntary posting (" Public Access") policy.

    As a service to our authors, Elsevier will deposit to PubMed Central (PMC) author manuscripts on behalf of Elsevier authors reporting NIH funded research. This service is a continuation of Elsevier's 2005 agreement with the NIH when the NIH introduced their voluntary 'Public Access Policy.'

    The service will help authors comply with the National Institutes of Health (NIH) revised ''Public Access Policy,'' effective April 7, 2008. The NIH's revised policy requires that NIH-funded authors submit to PubMed Central (PMC), or have submitted on their behalf, their peer-reviewed author manuscripts, to appear on PMC no later than 12 months after final publication.

    Elsevier will send to PMC the final peer-reviewed manuscript, which was accepted for publication and sent to Elsevier's production department, and that reflects any author-agreed changes made in response to peer-review comments. Elsevier will authorize the author manuscript's public access posting 12 months after final publication. Following the deposit by Elsevier, authors will receive further communications from Elsevier and NIH with respect to the submission.

    Authors are also welcome to post their accepted author manuscript on their personal or institutional web site. Please note that consistent with Elsevier's author agreement, authors should not post manuscripts directly to PMC or other third party sites. Individual modifications to this general policy may apply to some Elsevier journals and society publishing partners.

    As a leading publisher of scientific, technical and medical (STM) journals, Elsevier has led the industry in developing tools, programs and partnerships that provide greater access to, and understanding of, the vast global body of STM information. This service is an example of Elsevier willingness to work cooperatively to meet the needs of all participants in the STM publishing community.

    Open access

    This journal offers authors a choice in publishing their research:

    Open access
    • Articles are freely available to both subscribers and the wider public with permitted reuse
    • An open access publication fee is payable by authors or their research funder
    Subscription
    • Articles are made available to subscribers as well as developing countries and patient groups through our access programs (http://www.elsevier.com/access)
    • No open access publication fee

    All articles published open access will be immediately and permanently free for everyone to read and download. Permitted reuse is defined by your choice of one of the following Creative Commons user licenses:
    Creative Commons Attribution (CC BY): lets others distribute and copy the article, to create extracts, abstracts, and other revised versions, adaptations or derivative works of or from an article (such as a translation), to include in a collective work (such as an anthology), to text or data mine the article, even for commercial purposes, as long as they credit the author(s), do not represent the author as endorsing their adaptation of the article, and do not modify the article in such a way as to damage the author's honor or reputation.
    Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA): for non-commercial purposes, lets others distribute and copy the article, to create extracts, abstracts and other revised versions, adaptations or derivative works of or from an article (such as a translation), to include in a collective work (such as an anthology), to text and data mine the article, as long as they credit the author(s), do not represent the author as endorsing their adaptation of the article, do not modify the article in such a way as to damage the author's honor or reputation, and license their new adaptations or creations under identical terms (CC BY-NC-SA).
    Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND): for non-commercial purposes, lets others distribute and copy the article, and to include in a collective work (such as an anthology), as long as they credit the author(s) and provided they do not alter or modify the article.

    To provide open access, this journal has a publication fee which needs to be met by the authors or their research funders for each article published open access.
    Your publication choice will have no effect on the peer review process or acceptance of submitted articles.

    The publication fee for Open Access in this journal is $3000, excluding taxes. Learn more about Elsevier's pricing policy: http://www.elsevier.com/openaccesspricing.

    Language (usage and editing services)

    Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who feel their English language manuscript may require editing to eliminate possible grammatical or spelling errors and to conform to correct scientific English may wish to use the English Language Editing service available from Elsevier's WebShop (http://webshop.elsevier.com/languageediting/) or visit our customer support site (http://support.elsevier.com) for more information.

    Submission

    Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. To submit your article please got to http://ees.elsevier.com/gce. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.

    Referees

    Please submit the names and institutional e-mail addresses of several potential referees. For more details, visit our Support site. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.

    Article structure

    Subdivision - numbered sections
    Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear on its own separate line.

    Introduction
    State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.

    Material and methods
    Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.

    Material and methods Guidelines for Immunohistochemistry & RTqPCR assays

    1. Immunohistochemistry
    In the Methods section, for antibodies it is important to indicate the origin (eg. human, rat, fish) and sequence of the immunogen against which the animal was immunized. If using commercially generated antisera provide the name of company that made the antisera, the species that was immunized and whether the reagent is a monoclonal or polyclonal antibody. It is important to provide characterization information which can include Western blot analysis, radioimmunoassay or ELISA. Reference to previous publications is acceptable as long as the above characterizations have been performed in those publications. Controls may include pre-adsorption with the original antigen if the antigen is available and/or incubation with secondary antibody only. For analyses that involve transfected cells, the controls should include: incubation of the non-transfected cell line with primary and secondary antibody, and incubation of the transfected cells with secondary antibody only.

    2. What to look for when evaluating reviewers comments about real time quantitative PCR (RTqPCR) assays
    There is considerable debate and an ever growing literature about the "best way" to perform real time quantitative PCR (RTqPCR). One publication which gives extensive and helpful guidelines about RTq PCR is Nolan et al., 2006 Nature protocols 1; 1559 and if you are looking for formal guidelines and recommendations consult Clinical Chemistry (Bustin et al., 2009 55, 611). Some simple guidelines:
    1. The Dnase treatment and protocol should be indicated.
    2.The primers chosen for reverse transcription should be indicated.
    3. The RTqPCR primers and probe sequence (if used), the amplicon size along with the mix and supplier should be indicated.
    4. The sequence accession number should be provided.
    5. Steps taken to optimize and validate RTqPCR assays should be indicated (eg. primer concentration, MgCl2 concentration, dNTP concentration, melt temperature) and melting curve dynamics and absence of primer dimers should be confirmed.
    6. The complete RTqPCR thermocycle should be provided.
    7. The specificity of the RTqPCR assay should have been established by sequencing the reaction product at least once.
    8. The efficiency of the PCR reaction should be indicated (theoretically 100%), as should the method of validation (eg. cDNA or standard dilution curves).
    9. The choice of gene(s) for normalization should be justified and they should be referred to as reference genes and not as housekeeping genes. The method of normalization should be provided.

    Results
    Results should be clear and concise.

    Discussion
    This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

    Conclusions
    The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.

    Essential title page information

    Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
    Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
    Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that phone numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date by the corresponding author.
    Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

    Abstract

    A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.

    Graphical abstract

    A Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture the attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 × 13 cm using a regular screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. See http://www.elsevier.com/graphicalabstracts for examples.
    Authors can make use of Elsevier's Illustration and Enhancement service to ensure the best presentation of their images also in accordance with all technical requirements: Illustration Service.

    Highlights

    Highlights are mandatory for this journal. They consist of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including spaces, per bullet point). See http://www.elsevier.com/highlights for examples.

    Keywords

    Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.

    Abbreviations

    Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.

    Acknowledgements

    Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).

    Database linking

    Elsevier encourages authors to connect articles with external databases, giving their readers one-click access to relevant databases that help to build a better understanding of the described research. Please refer to relevant database identifiers using the following format in your article: Database: xxxx (e.g., TAIR: AT1G01020; CCDC: 734053; PDB: 1XFN). See http://www.elsevier.com/databaselinking for more information and a full list of supported databases.

    Artwork

    Electronic artwork
    General points
    • Make sure you use uniform lettering and sizing of your original artwork.
    • Embed the used fonts if the application provides that option.
    • Aim to use the following fonts in your illustrations: Arial, Courier, Times New Roman, Symbol, or use fonts that look similar.
    • Number the illustrations according to their sequence in the text.
    • Use a logical naming convention for your artwork files.
    • Provide captions to illustrations separately.
    • Size the illustrations close to the desired dimensions of the printed version.
    • Submit each illustration as a separate file.
    A detailed guide on electronic artwork is available on our website:
    http://www.elsevier.com/artworkinstructions
    You are urged to visit this site; some excerpts from the detailed information are given here.
    Formats
    If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is' in the native document format.
    Regardless of the application used other than Microsoft Office, when your electronic artwork is finalized, please 'Save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
    EPS (or PDF): Vector drawings, embed all used fonts.
    TIFF (or JPEG): Color or grayscale photographs (halftones), keep to a minimum of 300 dpi.
    TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi.
    TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of 500 dpi.
    Please do not:
    • Supply files that are optimized for screen use (e.g., GIF, BMP, PICT, WPG); these typically have a low number of pixels and limited set of colors;
    • Supply files that are too low in resolution;
    • Submit graphics that are disproportionately large for the content.

    Color artwork
    Please make sure that artwork files are in an acceptable format (TIFF (or JPEG), EPS (or PDF), or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
    Please note: Because of technical complications that can arise by converting color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.

    Figure captions
    Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.

    Tables

    Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.

    References

    Citation in text
    Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'. Citation of a reference as 'in press' implies that the item has been accepted for publication.

    Web references
    As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.

    Reference management software
    This journal has standard templates available in key reference management packages EndNote (http://www.endnote.com/support/enstyles.asp) and Reference Manager (http://refman.com/support/rmstyles.asp). Using plug-ins to wordprocessing packages, authors only need to select the appropriate journal template when preparing their article and the list of references and citations to these will be formatted according to the journal style which is described below.

    Reference style
    Text: All citations in the text should refer to:
    1. Single author: the author's name (without initials, unless there is ambiguity) and the year of publication;
    2. Two authors: both authors' names and the year of publication;
    3. Three or more authors: first author's name followed by 'et al.' and the year of publication.
    Citations may be made directly (or parenthetically). Groups of references should be listed first alphabetically, then chronologically.
    Examples: 'as demonstrated (Allan, 2000a, 2000b, 1999; Allan and Jones, 1999). Kramer et al. (2010) have recently shown ....'
    List: References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters 'a', 'b', 'c', etc., placed after the year of publication.
    Examples:
    Reference to a journal publication:
    Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2010. The art of writing a scientific article. J. Sci. Commun. 163, 51–59.
    Reference to a book:
    Strunk Jr., W., White, E.B., 2000. The Elements of Style, fourth ed. Longman, New York.
    Reference to a chapter in an edited book:
    Mettam, G.R., Adams, L.B., 2009. How to prepare an electronic version of your article, in: Jones, B.S., Smith , R.Z. (Eds.), Introduction to the Electronic Age. E-Publishing Inc., New York, pp. 281–304.

    Journal abbreviations source
    Journal names should be abbreviated according to:
    List of title word abbreviations: http://www.issn.org/2-22661-LTWA-online.php; NLM Catalog (Journals referenced in the NCBI Databases): http://www.ncbi.nlm.nih.gov/nlmcatalog/journals;
    CAS (Chemical Abstracts Service):via http://www.cas.org/content/references/corejournals. Video data

    Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include links to these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size of 50 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.

    AudioSlides

    The journal encourages authors to create an AudioSlides presentation with their published article. AudioSlides are brief, webinar-style presentations that are shown next to the online article on ScienceDirect. This gives authors the opportunity to summarize their research in their own words and to help readers understand what the paper is about. More information and examples are available at http://www.elsevier.com/audioslides. Authors of this journal will automatically receive an invitation e-mail to create an AudioSlides presentation after acceptance of their paper.

    Supplementary data

    Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.

    Interactive Phylogenetic Trees

    You can enrich your online articles by providing phylogenetic tree data files (optional) in Newick or NeXML format, which will be visualized using the interactive tree viewer embedded within the online article. Using the viewer it will be possible to zoom into certain tree areas, change the tree layout, search within the tree, and collapse/expand tree nodes and branches. Submitted tree files will also be available for downloading from your online article on ScienceDirect. Each tree must be contained in an individual data file before being uploaded separately to the online submission system, via the 'phylogenetic tree data' submission category. Newick files must have the extension .new or .nwk (note that a semicolon is needed to end the tree). Please do not enclose comments in Newick files and also delete any artificial line breaks within the tree data because these will stop the tree from showing. For NeXML, the file extension should be .xml. Please do not enclose comments in the file. Tree data submitted with other file extensions will not be processed. Please make sure that you validate your Newick/NeXML files prior to submission. For more information please see http://www.elsevier.com/phylogenetictrees.

    Submission checklist

    The following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this Guide for Authors for further details of any item.
    Ensure that the following items are present:
    One author has been designated as the corresponding author with contact details:
    • E-mail address
    • Full postal address
    • Phone numbers
    All necessary files have been uploaded, and contain:
    • Keywords
    • All figure captions
    • All tables (including title, description, footnotes)
    Further considerations
    • Manuscript has been 'spell-checked' and 'grammar-checked'
    • References are in the correct format for this journal
    • All references mentioned in the Reference list are cited in the text, and vice versa
    • Permission has been obtained for use of copyrighted material from other sources (including the Web)
    • Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white in print
    • If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
    For any further information please visit our customer support site at http://support.elsevier.com.

    Use of the Digital Object Identifier

    The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. Example of a correctly given DOI (in URL format; here an article in the journal Physics Letters B):
    http://dx.doi.org/10.1016/j.physletb.2010.09.059
    When you use a DOI to create links to documents on the web, the DOIs are guaranteed never to change.

    Online proof correction

    Corresponding authors will receive an e-mail with a link to our online proofing system, allowing annotation and correction of proofs online. The environment is similar to MS Word: in addition to editing text, you can also comment on figures/tables and answer questions from the Copy Editor. Web-based proofing provides a faster and less error-prone process by allowing you to directly type your corrections, eliminating the potential introduction of errors.
    If preferred, you can still choose to annotate and upload your edits on the PDF version. All instructions for proofing will be given in the e-mail we send to authors, including alternative methods to the online version and PDF.
    We will do everything possible to get your article published quickly and accurately - please upload all of your corrections within 48 hours. It is important to ensure that all corrections are sent back to us in one communication. Please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.

    Offprints

    The corresponding author, at no cost, will be provided with a personalized link providing 50 days free access to the final published version of the article on ScienceDirect. This link can also be used for sharing via email and social networks. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. Both corresponding and co-authors may order offprints at any time via Elsevier's WebShop (http://webshop.elsevier.com/myarticleservices/offprints). Authors requiring printed copies of multiple articles may use Elsevier WebShop's 'Create Your Own Book' service to collate multiple articles within a single cover (http://webshop.elsevier.com/myarticleservices/booklets).



    You can track your submitted article at http://help.elsevier.com/app/answers/detail/a_id/89/p/8045/. You can track your accepted article at http://www.elsevier.com/trackarticle. You are also welcome to contact Customer Support via http://support.elsevier.com.

Advertisement

advert image