Recent Articles


Wed Mar 26

1 K. Krasnowski | C. Hamilton | S. Dymek
Influence of the tool shape and weld configuration on microstructure and mechanical properties of the Al 6082 alloy FSW joints
Archives of Civil and Mechanical Engineering, Available online 26 March 2014,
2 U. Radoń
Numerical aspects of application of FORM in node snapping truss structures
Archives of Civil and Mechanical Engineering, Available online 26 March 2014,
3 G. Kulesza | P. Panek | P. Zięba
Time efficient texturization of multicrystalline silicon in the HF/HNO3 solutions and its effect on optoelectronic parameters of solar cells
Archives of Civil and Mechanical Engineering, Available online 26 March 2014,
4 N.Đ. Zrnić | V.M. GaÅ¡ić | S.M. BoÅ¡njak
Dynamic responses of a gantry crane system due to a moving body considered as moving oscillator
Archives of Civil and Mechanical Engineering, Available online 26 March 2014,
5 A. Janus | K. Granat
Heat treatment of Ni–Mn–Cu cast iron
Archives of Civil and Mechanical Engineering, Available online 25 March 2014,
6 S.Y. Alam | F. Hammoum
Viscoelastic properties of asphalt concrete using micromechanical self-consistent model
Archives of Civil and Mechanical Engineering, Available online 25 March 2014,
7 G. Ziółkowski | E. Chlebus | P. Szymczyk | J. Kurzac
Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology
Archives of Civil and Mechanical Engineering, Available online 22 March 2014,
8 A. Katunin
Stone impact damage identification in composite plates using modal data and quincunx wavelet analysis
Archives of Civil and Mechanical Engineering, Available online 20 March 2014,
9 L. Major
Wear mechanisms of multilayer TiN/Ti/a-C:H coatings investigated by transmission electron microscopy technique
Archives of Civil and Mechanical Engineering, Available online 24 February 2014,
10 T. Singh | A. Patnaik
Performance assessment of lapinus–aramid based brake pad hybrid phenolic composites in friction braking
Archives of Civil and Mechanical Engineering, Available online 23 February 2014,